mirror of https://github.com/ArduPilot/ardupilot
88 lines
2.7 KiB
C++
88 lines
2.7 KiB
C++
/*
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
// This driver is for the neopixel on the Blue Robotics Navigator board
|
|
// designed for the Raspberry Pi 4. The neopixel data in is connected to
|
|
// the Raspberry Pi's MOSI pin. The clock, chip select, and MISO pins are
|
|
// not used. The data is sent to the neopixel in 24 'SPI bytes', where each
|
|
// spi byte is formatted to appear as a single bit of data to the neopixel.
|
|
|
|
#include "AP_Notify_config.h"
|
|
|
|
#if AP_NOTIFY_NAVIGATOR_LED_ENABLED
|
|
|
|
#include <AP_HAL/AP_HAL.h>
|
|
#include "AP_Notify/AP_Notify.h"
|
|
#include "NavigatorLED.h"
|
|
|
|
#define NEOPIXEL_LED_LOW 0x18
|
|
#define NEOPIXEL_LED_MEDIUM 0x40
|
|
#define NEOPIXEL_LED_HIGH 0xFF
|
|
#define NEOPIXEL_LED_OFF 0x00
|
|
|
|
#define LED_T0 0b11000000
|
|
#define LED_T1 0b11110000
|
|
|
|
extern const AP_HAL::HAL& hal;
|
|
|
|
NavigatorLED::NavigatorLED() :
|
|
RGBLed(NEOPIXEL_LED_OFF, NEOPIXEL_LED_HIGH, NEOPIXEL_LED_MEDIUM, NEOPIXEL_LED_LOW)
|
|
{
|
|
}
|
|
|
|
bool NavigatorLED::init()
|
|
{
|
|
_dev = hal.spi->get_device("led");
|
|
if (!_dev) {
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
bool NavigatorLED::hw_set_rgb(uint8_t red, uint8_t green, uint8_t blue)
|
|
{
|
|
if (!_dev) {
|
|
return false;
|
|
}
|
|
|
|
// format our spi bytes to transmit the desired color data
|
|
_setup_data(red, green, blue);
|
|
|
|
// take i2c bus sempahore
|
|
WITH_SEMAPHORE(_dev->get_semaphore());
|
|
|
|
// send the new color data
|
|
return _dev->transfer(_data, sizeof(_data), nullptr, 0);
|
|
}
|
|
|
|
// Get our bytes ready to send the desired color data
|
|
// Datasheet: https://cdn-shop.adafruit.com/datasheets/WS2812B.pdf
|
|
// 24bit msg as 3 byte GRB (not RGB) where first bit is G7, and last bit is B0
|
|
// (first) G7|G6|G5|G4|G3|G2|G1|G0|R7|R6|R5|R4|R3|R2|R1|R0|B7|B6|B5|B4|B3|B2|B1|B0 (last)
|
|
void NavigatorLED::_setup_data(uint8_t red, uint8_t green, uint8_t blue)
|
|
{
|
|
for (uint8_t i = 0; i < 8; i++) {
|
|
_data[i] = (green & (1<<(7-i))) ? LED_T1 : LED_T0;
|
|
}
|
|
for (uint8_t i = 0; i < 8; i++) {
|
|
_data[8 + i] = (red & (1<<(7-i))) ? LED_T1 : LED_T0;
|
|
}
|
|
for (uint8_t i = 0; i < 8; i++) {
|
|
_data[16 + i] = (blue & (1<<(7-i))) ? LED_T1 : LED_T0;
|
|
}
|
|
}
|
|
|
|
#endif // AP_NOTIFY_NAVIGATOR_LED_ENABLED
|