ardupilot/mk/px4_targets.mk

65 lines
1.9 KiB
Makefile

# PX4 build is via external build system
ifneq ($(PX4_ROOT),)
# try to cope with relative paths
ifeq ($(wildcard $(PX4_ROOT)/nuttx),)
PX4_ROOT := $(shell cd $(SKETCHBOOK)/$(PX4_ROOT) && pwd)
endif
ifeq ($(wildcard $(PX4_ROOT)/nuttx),)
$(error ERROR: PX4_ROOT not set correctly - no nuttx directory found)
endif
PX4_CONFIG_FILE=$(MK_DIR)/PX4/config_px4fmu_APM.mk
SKETCHFLAGS=$(SKETCHLIBINCLUDES) -I$(PWD) -DARDUPILOT_BUILD -DCONFIG_HAL_BOARD=HAL_BOARD_PX4 -DSKETCHNAME="\\\"$(SKETCH)\\\"" -DSKETCH_MAIN=ArduPilot_main
PX4_MAKE = make -C $(BUILDROOT) -f $(PX4_ROOT)/makefiles/firmware.mk CONFIG_FILE=$(PWD)/$(PX4_CONFIG_FILE) EXTRADEFINES="$(SKETCHFLAGS) "$(EXTRAFLAGS) APM_MODULE_DIR=$(BUILDROOT) SKETCHBOOK=$(SKETCHBOOK) PX4_ROOT=$(PX4_ROOT)
$(BUILDROOT)/module.mk:
$(RULEHDR)
$(v) echo "# Auto-generated file - do not edit" > $@
$(v) echo "MODULE_COMMAND = ArduPilot" >> $@
$(v) echo "SRCS = $(SKETCH).cpp $(SKETCHLIBSRCS)" >> $@
$(v) echo "MODULE_STACKSIZE = 4096" >> $@
px4: $(PX4_ROOT)/Archives/px4fmu.export $(SKETCHCPP) $(BUILDROOT)/module.mk
$(RULEHDR)
$(v) $(PX4_MAKE) firmware
$(v) /bin/rm -f $(SKETCH).px4
$(v) cp $(PX4_ROOT)/makefiles/build/firmware.px4 $(SKETCH).px4
$(v) echo "PX4 $(SKETCH) Firmware is in $(SKETCH).px4"
px4-clean: clean px4-archives-clean
$(v) /bin/rm -rf $(PX4_ROOT)/makefiles/build $(PX4_ROOT)/Build
px4-upload: px4
$(RULEHDR)
$(PX4_MAKE) upload
px4-archives-clean:
$(v) /bin/rm -rf $(PX4_ROOT)/Archives
px4-io: $(PX4_ROOT)/Archives/px4io.export
$(v) make -C $(PX4_ROOT) px4io_default
$(v) /bin/rm -f px4io.bin
$(v) cp $(PX4_ROOT)/Build/px4io_default.build/firmware.bin px4io.bin
$(v) echo "PX4IO Firmware is in px4io.bin"
$(PX4_ROOT)/Archives/px4fmu.export:
make -C $(PX4_ROOT) archives
$(PX4_ROOT)/Archives/px4io.export:
make -C $(PX4_ROOT) archives
px4-archives: $(PX4_ROOT)/Archives/px4fmu.export
else
px4:
$(error ERROR: You need to add PX4_ROOT to your config.mk)
px4-clean: px4
px4-upload: px4
endif