mirror of https://github.com/ArduPilot/ardupilot
1089 lines
39 KiB
C++
1089 lines
39 KiB
C++
#include "Copter.h"
|
|
|
|
#if TOY_MODE_ENABLED == ENABLED
|
|
|
|
// times in 0.1s units
|
|
#define TOY_COMMAND_DELAY 15
|
|
#define TOY_LONG_PRESS_COUNT 15
|
|
#define TOY_LAND_MANUAL_DISARM_COUNT 40
|
|
#define TOY_LAND_DISARM_COUNT 1
|
|
#define TOY_LAND_ARM_COUNT 1
|
|
#define TOY_RIGHT_PRESS_COUNT 1
|
|
#define TOY_ACTION_DELAY_MS 200
|
|
#define TOY_DESCENT_SLOW_HEIGHT 5
|
|
#define TOY_DESCENT_SLOW_RAMP 3
|
|
#define TOY_DESCENT_SLOW_MIN 300
|
|
#define TOY_RESET_TURTLE_TIME 5000
|
|
|
|
#define ENABLE_LOAD_TEST 0
|
|
|
|
const AP_Param::GroupInfo ToyMode::var_info[] = {
|
|
|
|
// @Param: _ENABLE
|
|
// @DisplayName: tmode enable
|
|
// @Description: tmode (or "toy" mode) gives a simplified user interface designed for mass market drones. Version1 is for the SkyViper V2450GPS. Version2 is for the F412 based boards
|
|
// @Values: 0:Disabled,1:EnableVersion1,2:EnableVersion2
|
|
// @User: Advanced
|
|
AP_GROUPINFO_FLAGS("_ENABLE", 1, ToyMode, enable, 0, AP_PARAM_FLAG_ENABLE),
|
|
|
|
// @Param: _MODE1
|
|
// @DisplayName: Tmode first mode
|
|
// @Description: This is the initial mode when the vehicle is first turned on. This mode is assumed to not require GPS
|
|
// @Values: 0:Stabilize,1:Acro,2:AltHold,3:Auto,4:Guided,5:Loiter,6:RTL,7:Circle,9:Land,11:Drift,13:Sport,14:Flip,15:AutoTune,16:PosHold,17:Brake,18:Throw,19:Avoid_ADSB,20:Guided_NoGPS,21:FlowHold
|
|
// @User: Standard
|
|
AP_GROUPINFO("_MODE1", 2, ToyMode, primary_mode[0], (float)Mode::Number::ALT_HOLD),
|
|
|
|
// @Param: _MODE2
|
|
// @DisplayName: Tmode second mode
|
|
// @Description: This is the secondary mode. This mode is assumed to require GPS
|
|
// @Values: 0:Stabilize,1:Acro,2:AltHold,3:Auto,4:Guided,5:Loiter,6:RTL,7:Circle,9:Land,11:Drift,13:Sport,14:Flip,15:AutoTune,16:PosHold,17:Brake,18:Throw,19:Avoid_ADSB,20:Guided_NoGPS,21:FlowHold
|
|
// @User: Standard
|
|
AP_GROUPINFO("_MODE2", 3, ToyMode, primary_mode[1], (float)Mode::Number::LOITER),
|
|
|
|
// @Param: _ACTION1
|
|
// @DisplayName: Tmode action 1
|
|
// @Description: This is the action taken when the left action button is pressed
|
|
// @Values: 0:None,1:TakePhoto,2:ToggleVideo,3:ModeAcro,4:ModeAltHold,5:ModeAuto,6:ModeLoiter,7:ModeRTL,8:ModeCircle,9:ModeLand,10:ModeDrift,11:ModeSport,12:ModeAutoTune,13:ModePosHold,14:ModeBrake,15:ModeThrow,16:Flip,17:ModeStabilize,18:Disarm,19:ToggleMode,20:Arm-Land-RTL,21:ToggleSimpleMode,22:ToggleSuperSimpleMode,23:MotorLoadTest,24:ModeFlowHold
|
|
// @User: Standard
|
|
AP_GROUPINFO("_ACTION1", 4, ToyMode, actions[0], ACTION_TOGGLE_VIDEO),
|
|
|
|
// @Param: _ACTION2
|
|
// @DisplayName: Tmode action 2
|
|
// @Description: This is the action taken when the right action button is pressed
|
|
// @Values: 0:None,1:TakePhoto,2:ToggleVideo,3:ModeAcro,4:ModeAltHold,5:ModeAuto,6:ModeLoiter,7:ModeRTL,8:ModeCircle,9:ModeLand,10:ModeDrift,11:ModeSport,12:ModeAutoTune,13:ModePosHold,14:ModeBrake,15:ModeThrow,16:Flip,17:ModeStabilize,18:Disarm,19:ToggleMode,20:Arm-Land-RTL,21:ToggleSimpleMode,22:ToggleSuperSimpleMode,23:MotorLoadTest,24:ModeFlowHold
|
|
// @User: Standard
|
|
AP_GROUPINFO("_ACTION2", 5, ToyMode, actions[1], ACTION_TAKE_PHOTO),
|
|
|
|
// @Param: _ACTION3
|
|
// @DisplayName: Tmode action 3
|
|
// @Description: This is the action taken when the power button is pressed
|
|
// @Values: 0:None,1:TakePhoto,2:ToggleVideo,3:ModeAcro,4:ModeAltHold,5:ModeAuto,6:ModeLoiter,7:ModeRTL,8:ModeCircle,9:ModeLand,10:ModeDrift,11:ModeSport,12:ModeAutoTune,13:ModePosHold,14:ModeBrake,15:ModeThrow,16:Flip,17:ModeStabilize,18:Disarm,19:ToggleMode,20:Arm-Land-RTL,21:ToggleSimpleMode,22:ToggleSuperSimpleMode,23:MotorLoadTest,24:ModeFlowHold
|
|
// @User: Standard
|
|
AP_GROUPINFO("_ACTION3", 6, ToyMode, actions[2], ACTION_DISARM),
|
|
|
|
// @Param: _ACTION4
|
|
// @DisplayName: Tmode action 4
|
|
// @Description: This is the action taken when the left action button is pressed while the left (Mode) button is held down
|
|
// @Values: 0:None,1:TakePhoto,2:ToggleVideo,3:ModeAcro,4:ModeAltHold,5:ModeAuto,6:ModeLoiter,7:ModeRTL,8:ModeCircle,9:ModeLand,10:ModeDrift,11:ModeSport,12:ModeAutoTune,13:ModePosHold,14:ModeBrake,15:ModeThrow,16:Flip,17:ModeStabilize,18:Disarm,19:ToggleMode,20:Arm-Land-RTL,21:ToggleSimpleMode,22:ToggleSuperSimpleMode,23:MotorLoadTest,24:ModeFlowHold
|
|
// @User: Standard
|
|
AP_GROUPINFO("_ACTION4", 7, ToyMode, actions[3], ACTION_NONE),
|
|
|
|
// @Param: _ACTION5
|
|
// @DisplayName: Tmode action 5
|
|
// @Description: This is the action taken when the right action is pressed while the left (Mode) button is held down
|
|
// @Values: 0:None,1:TakePhoto,2:ToggleVideo,3:ModeAcro,4:ModeAltHold,5:ModeAuto,6:ModeLoiter,7:ModeRTL,8:ModeCircle,9:ModeLand,10:ModeDrift,11:ModeSport,12:ModeAutoTune,13:ModePosHold,14:ModeBrake,15:ModeThrow,16:Flip,17:ModeStabilize,18:Disarm,19:ToggleMode,20:Arm-Land-RTL,21:ToggleSimpleMode,22:ToggleSuperSimpleMode,23:MotorLoadTest,24:ModeFlowHold
|
|
// @User: Standard
|
|
AP_GROUPINFO("_ACTION5", 8, ToyMode, actions[4], ACTION_NONE),
|
|
|
|
// @Param: _ACTION6
|
|
// @DisplayName: Tmode action 6
|
|
// @Description: This is the action taken when the power button is pressed while the left (Mode) button is held down
|
|
// @Values: 0:None,1:TakePhoto,2:ToggleVideo,3:ModeAcro,4:ModeAltHold,5:ModeAuto,6:ModeLoiter,7:ModeRTL,8:ModeCircle,9:ModeLand,10:ModeDrift,11:ModeSport,12:ModeAutoTune,13:ModePosHold,14:ModeBrake,15:ModeThrow,16:Flip,17:ModeStabilize,18:Disarm,19:ToggleMode,20:Arm-Land-RTL,21:ToggleSimpleMode,22:ToggleSuperSimpleMode,23:MotorLoadTest,24:ModeFlowHold
|
|
// @User: Standard
|
|
AP_GROUPINFO("_ACTION6", 9, ToyMode, actions[5], ACTION_NONE),
|
|
|
|
// @Param: _LEFT
|
|
// @DisplayName: Tmode left action
|
|
// @Description: This is the action taken when the left (Mode) button is pressed
|
|
// @Values: 0:None,1:TakePhoto,2:ToggleVideo,3:ModeAcro,4:ModeAltHold,5:ModeAuto,6:ModeLoiter,7:ModeRTL,8:ModeCircle,9:ModeLand,10:ModeDrift,11:ModeSport,12:ModeAutoTune,13:ModePosHold,14:ModeBrake,15:ModeThrow,16:Flip,17:ModeStabilize,18:Disarm,19:ToggleMode,20:Arm-Land-RTL,21:ToggleSimpleMode,22:ToggleSuperSimpleMode,23:MotorLoadTest,24:ModeFlowHold
|
|
// @User: Standard
|
|
AP_GROUPINFO("_LEFT", 10, ToyMode, actions[6], ACTION_TOGGLE_MODE),
|
|
|
|
// @Param: _LEFT_LONG
|
|
// @DisplayName: Tmode left long action
|
|
// @Description: This is the action taken when the left (Mode) button is long-pressed
|
|
// @Values: 0:None,1:TakePhoto,2:ToggleVideo,3:ModeAcro,4:ModeAltHold,5:ModeAuto,6:ModeLoiter,7:ModeRTL,8:ModeCircle,9:ModeLand,10:ModeDrift,11:ModeSport,12:ModeAutoTune,13:ModePosHold,14:ModeBrake,15:ModeThrow,16:Flip,17:ModeStabilize,18:Disarm,19:ToggleMode,20:Arm-Land-RTL,21:ToggleSimpleMode,22:ToggleSuperSimpleMode,23:MotorLoadTest,24:ModeFlowHold
|
|
// @User: Standard
|
|
AP_GROUPINFO("_LEFT_LONG", 11, ToyMode, actions[7], ACTION_NONE),
|
|
|
|
// @Param: _TRIM_AUTO
|
|
// @DisplayName: Stick auto trim limit
|
|
// @Description: This is the amount of automatic stick trim that can be applied when disarmed with sticks not moving. It is a PWM limit value away from 1500
|
|
// @Range: 0 100
|
|
// @User: Standard
|
|
AP_GROUPINFO("_TRIM_AUTO", 12, ToyMode, trim_auto, 50),
|
|
|
|
// @Param: _RIGHT
|
|
// @DisplayName: Tmode right action
|
|
// @Description: This is the action taken when the right (Return) button is pressed
|
|
// @Values: 0:None,1:TakePhoto,2:ToggleVideo,3:ModeAcro,4:ModeAltHold,5:ModeAuto,6:ModeLoiter,7:ModeRTL,8:ModeCircle,9:ModeLand,10:ModeDrift,11:ModeSport,12:ModeAutoTune,13:ModePosHold,14:ModeBrake,15:ModeThrow,16:Flip,17:ModeStabilize,18:Disarm,19:ToggleMode,20:Arm-Land-RTL,21:ToggleSimpleMode,22:ToggleSuperSimpleMode,23:MotorLoadTest
|
|
// @User: Standard
|
|
AP_GROUPINFO("_RIGHT", 13, ToyMode, actions[8], ACTION_ARM_LAND_RTL),
|
|
|
|
// @Param: _FLAGS
|
|
// @DisplayName: Tmode flags
|
|
// @Description: Bitmask of flags to change the behaviour of tmode. DisarmOnLowThrottle means to disarm if throttle is held down for 1 second when landed. ArmOnHighThrottle means to arm if throttle is above 80% for 1 second. UpgradeToLoiter means to allow takeoff in LOITER mode by switching to ALT_HOLD, then auto-upgrading to LOITER once GPS is available. RTLStickCancel means that on large stick inputs in RTL mode that LOITER mode is engaged
|
|
// @Bitmask: 0:DisarmOnLowThrottle,1:ArmOnHighThrottle,2:UpgradeToLoiter,3:RTLStickCancel
|
|
// @User: Standard
|
|
AP_GROUPINFO("_FLAGS", 14, ToyMode, flags, FLAG_THR_DISARM),
|
|
|
|
// @Param: _VMIN
|
|
// @DisplayName: Min voltage for output limiting
|
|
// @Description: This is the battery voltage below which no output limiting is done
|
|
// @Range: 0 5
|
|
// @Increment: 0.01
|
|
// @User: Advanced
|
|
AP_GROUPINFO("_VMIN", 15, ToyMode, filter.volt_min, 3.5),
|
|
|
|
// @Param: _VMAX
|
|
// @DisplayName: Max voltage for output limiting
|
|
// @Description: This is the battery voltage above which thrust min is used
|
|
// @Range: 0 5
|
|
// @Increment: 0.01
|
|
// @User: Advanced
|
|
AP_GROUPINFO("_VMAX", 16, ToyMode, filter.volt_max, 3.8),
|
|
|
|
// @Param: _TMIN
|
|
// @DisplayName: Min thrust multiplier
|
|
// @Description: This sets the thrust multiplier when voltage is high
|
|
// @Range: 0 1
|
|
// @Increment: 0.01
|
|
// @User: Advanced
|
|
AP_GROUPINFO("_TMIN", 17, ToyMode, filter.thrust_min, 1.0),
|
|
|
|
// @Param: _TMAX
|
|
// @DisplayName: Max thrust multiplier
|
|
// @Description: This sets the thrust multiplier when voltage is low
|
|
// @Range: 0 1
|
|
// @Increment: 0.01
|
|
// @User: Advanced
|
|
AP_GROUPINFO("_TMAX", 18, ToyMode, filter.thrust_max, 1.0),
|
|
|
|
#if ENABLE_LOAD_TEST
|
|
// @Param: _LOAD_MUL
|
|
// @DisplayName: Load test multiplier
|
|
// @Description: This scales the load test output, as a value between 0 and 1
|
|
// @Range: 0 1
|
|
// @Increment: 0.01
|
|
// @User: Advanced
|
|
AP_GROUPINFO("_LOAD_MUL", 19, ToyMode, load_test.load_mul, 1.0),
|
|
|
|
// @Param: _LOAD_FILT
|
|
// @DisplayName: Load test filter
|
|
// @Description: This filters the load test output. A value of 1 means no filter. 2 means values are repeated once. 3 means values are repeated 3 times, etc
|
|
// @Range: 0 100
|
|
// @User: Advanced
|
|
AP_GROUPINFO("_LOAD_FILT", 20, ToyMode, load_test.load_filter, 1),
|
|
|
|
// @Param: _LOAD_TYPE
|
|
// @DisplayName: Load test type
|
|
// @Description: This sets the type of load test
|
|
// @Values: 0:ConstantThrust,1:LogReplay1,2:LogReplay2
|
|
// @User: Advanced
|
|
AP_GROUPINFO("_LOAD_TYPE", 21, ToyMode, load_test.load_type, LOAD_TYPE_LOG1),
|
|
#endif
|
|
|
|
AP_GROUPEND
|
|
};
|
|
|
|
ToyMode::ToyMode()
|
|
{
|
|
AP_Param::setup_object_defaults(this, var_info);
|
|
}
|
|
|
|
/*
|
|
special mode handling for toys
|
|
*/
|
|
void ToyMode::update()
|
|
{
|
|
if (!enable) {
|
|
// not enabled
|
|
return;
|
|
}
|
|
|
|
#if ENABLE_LOAD_TEST
|
|
if (!copter.motors->armed()) {
|
|
load_test.running = false;
|
|
}
|
|
#endif
|
|
|
|
// keep filtered battery voltage for thrust limiting
|
|
filtered_voltage = 0.99 * filtered_voltage + 0.01 * copter.battery.voltage();
|
|
|
|
// update LEDs
|
|
blink_update();
|
|
|
|
if (!done_first_update) {
|
|
done_first_update = true;
|
|
copter.set_mode(Mode::Number(primary_mode[0].get()), ModeReason::TOY_MODE);
|
|
copter.motors->set_thrust_compensation_callback(FUNCTOR_BIND_MEMBER(&ToyMode::thrust_limiting, void, float *, uint8_t));
|
|
}
|
|
|
|
// check if we should auto-trim
|
|
if (trim_auto > 0) {
|
|
trim_update();
|
|
}
|
|
|
|
// set ALT_HOLD as indoors for the EKF (disables GPS vertical velocity fusion)
|
|
#if 0
|
|
copter.ahrs.set_indoor_mode(copter.flightmode->mode_number() == ALT_HOLD || copter.flightmode->mode_number() == FLOWHOLD);
|
|
#endif
|
|
|
|
bool left_button = false;
|
|
bool right_button = false;
|
|
bool left_action_button = false;
|
|
bool right_action_button = false;
|
|
bool power_button = false;
|
|
bool left_change = false;
|
|
|
|
uint16_t ch5_in = RC_Channels::get_radio_in(CH_5);
|
|
uint16_t ch6_in = RC_Channels::get_radio_in(CH_6);
|
|
uint16_t ch7_in = RC_Channels::get_radio_in(CH_7);
|
|
|
|
if (copter.failsafe.radio || ch5_in < 900) {
|
|
// failsafe handling is outside the scope of toy mode, it does
|
|
// normal failsafe actions, just setup a blink pattern
|
|
green_blink_pattern = BLINK_NO_RX;
|
|
red_blink_pattern = BLINK_NO_RX;
|
|
red_blink_index = green_blink_index;
|
|
return;
|
|
}
|
|
|
|
uint32_t now = AP_HAL::millis();
|
|
|
|
if (is_v2450_buttons()) {
|
|
// V2450 button mapping from cypress radio. It maps the
|
|
// buttons onto channels 5, 6 and 7 in a complex way, with the
|
|
// left button latching
|
|
left_change = ((ch5_in > 1700 && last_ch5 <= 1700) || (ch5_in <= 1700 && last_ch5 > 1700));
|
|
|
|
last_ch5 = ch5_in;
|
|
|
|
// get buttons from channels
|
|
left_button = (ch5_in > 2050 || (ch5_in > 1050 && ch5_in < 1150));
|
|
right_button = (ch6_in > 1500);
|
|
uint8_t ch7_bits = (ch7_in>1000)?uint8_t((ch7_in-1000)/100):0;
|
|
left_action_button = (ch7_bits&1) != 0;
|
|
right_action_button = (ch7_bits&2) != 0;
|
|
power_button = (ch7_bits&4) != 0;
|
|
} else if (is_f412_buttons()) {
|
|
// F412 button setup for cc2500 radio. This maps the 6 buttons
|
|
// onto channels 5 and 6, with no latching
|
|
uint8_t ch5_bits = (ch5_in>1000)?uint8_t((ch5_in-1000)/100):0;
|
|
uint8_t ch6_bits = (ch6_in>1000)?uint8_t((ch6_in-1000)/100):0;
|
|
left_button = (ch5_bits & 4) != 0;
|
|
right_button = (ch5_bits & 2) != 0;
|
|
right_action_button = (ch6_bits & 1) != 0;
|
|
left_action_button = (ch6_bits & 2) != 0;
|
|
power_button = (ch6_bits & 4) != 0;
|
|
left_change = (left_button != last_left_button);
|
|
last_left_button = left_button;
|
|
}
|
|
|
|
// decode action buttons into an action
|
|
uint8_t action_input = 0;
|
|
if (left_action_button) {
|
|
action_input = 1;
|
|
} else if (right_action_button) {
|
|
action_input = 2;
|
|
} else if (power_button) {
|
|
action_input = 3;
|
|
}
|
|
|
|
if (action_input != 0 && left_button) {
|
|
// combined button actions
|
|
action_input += 3;
|
|
left_press_counter = 0;
|
|
} else if (left_button) {
|
|
left_press_counter++;
|
|
} else {
|
|
left_press_counter = 0;
|
|
}
|
|
|
|
bool reset_combination = left_action_button && right_action_button;
|
|
if (reset_combination && abs(copter.ahrs.roll_sensor) > 160) {
|
|
/*
|
|
if both shoulder buttons are pressed at the same time for 5
|
|
seconds while the vehicle is inverted then we send a
|
|
WIFIRESET message to the sonix to reset SSID and password
|
|
*/
|
|
if (reset_turtle_start_ms == 0) {
|
|
reset_turtle_start_ms = now;
|
|
}
|
|
if (now - reset_turtle_start_ms > TOY_RESET_TURTLE_TIME) {
|
|
gcs().send_text(MAV_SEVERITY_INFO, "Tmode: WiFi reset");
|
|
reset_turtle_start_ms = 0;
|
|
send_named_int("WIFIRESET", 1);
|
|
}
|
|
} else {
|
|
reset_turtle_start_ms = 0;
|
|
}
|
|
if (reset_combination) {
|
|
// don't act on buttons when combination pressed
|
|
action_input = 0;
|
|
left_press_counter = 0;
|
|
}
|
|
|
|
/*
|
|
work out commanded action, if any
|
|
*/
|
|
enum toy_action action = action_input?toy_action(actions[action_input-1].get()):ACTION_NONE;
|
|
|
|
// check for long left button press
|
|
if (action == ACTION_NONE && left_press_counter > TOY_LONG_PRESS_COUNT) {
|
|
left_press_counter = -TOY_COMMAND_DELAY;
|
|
action = toy_action(actions[7].get());
|
|
ignore_left_change = true;
|
|
}
|
|
|
|
// cope with long left press triggering a left change
|
|
if (ignore_left_change && left_change) {
|
|
left_change = false;
|
|
ignore_left_change = false;
|
|
}
|
|
|
|
if (is_v2450_buttons()) {
|
|
// check for left button latching change
|
|
if (action == ACTION_NONE && left_change) {
|
|
action = toy_action(actions[6].get());
|
|
}
|
|
} else if (is_f412_buttons()) {
|
|
if (action == ACTION_NONE && left_change && !left_button) {
|
|
// left release
|
|
action = toy_action(actions[6].get());
|
|
}
|
|
|
|
}
|
|
|
|
// check for right button
|
|
if (action == ACTION_NONE && right_button) {
|
|
right_press_counter++;
|
|
if (right_press_counter >= TOY_RIGHT_PRESS_COUNT) {
|
|
action = toy_action(actions[8].get());
|
|
right_press_counter = -TOY_COMMAND_DELAY;
|
|
}
|
|
} else {
|
|
right_press_counter = 0;
|
|
}
|
|
|
|
/*
|
|
some actions shouldn't repeat too fast
|
|
*/
|
|
switch (action) {
|
|
case ACTION_TOGGLE_VIDEO:
|
|
case ACTION_TOGGLE_MODE:
|
|
case ACTION_TOGGLE_SIMPLE:
|
|
case ACTION_TOGGLE_SSIMPLE:
|
|
case ACTION_ARM_LAND_RTL:
|
|
case ACTION_LOAD_TEST:
|
|
case ACTION_MODE_FLOW:
|
|
if (last_action == action ||
|
|
now - last_action_ms < TOY_ACTION_DELAY_MS) {
|
|
// for the above actions, button must be released before
|
|
// it will activate again
|
|
last_action = action;
|
|
action = ACTION_NONE;
|
|
}
|
|
break;
|
|
|
|
case ACTION_TAKE_PHOTO:
|
|
// allow photo continuous shooting
|
|
if (now - last_action_ms < TOY_ACTION_DELAY_MS) {
|
|
last_action = action;
|
|
action = ACTION_NONE;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
last_action = action;
|
|
break;
|
|
}
|
|
|
|
if (action != ACTION_NONE) {
|
|
gcs().send_text(MAV_SEVERITY_INFO, "Tmode: action %u", action);
|
|
last_action_ms = now;
|
|
}
|
|
|
|
// we use 150 for throttle_at_min to cope with varying stick throws
|
|
bool throttle_at_min =
|
|
copter.channel_throttle->get_control_in() < 150;
|
|
|
|
// throttle threshold for throttle arming
|
|
bool throttle_near_max =
|
|
copter.channel_throttle->get_control_in() > 700;
|
|
|
|
/*
|
|
disarm if throttle is low for 1 second when landed
|
|
*/
|
|
if ((flags & FLAG_THR_DISARM) && throttle_at_min && copter.motors->armed() && copter.ap.land_complete) {
|
|
throttle_low_counter++;
|
|
const uint8_t disarm_limit = copter.flightmode->has_manual_throttle()?TOY_LAND_MANUAL_DISARM_COUNT:TOY_LAND_DISARM_COUNT;
|
|
if (throttle_low_counter >= disarm_limit) {
|
|
gcs().send_text(MAV_SEVERITY_INFO, "Tmode: throttle disarm");
|
|
copter.arming.disarm(AP_Arming::Method::TOYMODELANDTHROTTLE);
|
|
}
|
|
} else {
|
|
throttle_low_counter = 0;
|
|
}
|
|
|
|
/*
|
|
arm if throttle is high for 1 second when landed
|
|
*/
|
|
if ((flags & FLAG_THR_ARM) && throttle_near_max && !copter.motors->armed()) {
|
|
throttle_high_counter++;
|
|
if (throttle_high_counter >= TOY_LAND_ARM_COUNT) {
|
|
gcs().send_text(MAV_SEVERITY_INFO, "Tmode: throttle arm");
|
|
arm_check_compass();
|
|
if (!copter.arming.arm(AP_Arming::Method::MAVLINK) && (flags & FLAG_UPGRADE_LOITER) && copter.flightmode->mode_number() == Mode::Number::LOITER) {
|
|
/*
|
|
support auto-switching to ALT_HOLD, then upgrade to LOITER once GPS available
|
|
*/
|
|
if (set_and_remember_mode(Mode::Number::ALT_HOLD, ModeReason::TOY_MODE)) {
|
|
gcs().send_text(MAV_SEVERITY_INFO, "Tmode: ALT_HOLD update arm");
|
|
#if AC_FENCE == ENABLED
|
|
copter.fence.enable(false);
|
|
#endif
|
|
if (!copter.arming.arm(AP_Arming::Method::MAVLINK)) {
|
|
// go back to LOITER
|
|
gcs().send_text(MAV_SEVERITY_ERROR, "Tmode: ALT_HOLD arm failed");
|
|
set_and_remember_mode(Mode::Number::LOITER, ModeReason::TOY_MODE);
|
|
} else {
|
|
upgrade_to_loiter = true;
|
|
#if 0
|
|
AP_Notify::flags.hybrid_loiter = true;
|
|
#endif
|
|
}
|
|
}
|
|
} else {
|
|
throttle_arm_ms = AP_HAL::millis();
|
|
}
|
|
}
|
|
} else {
|
|
throttle_high_counter = 0;
|
|
}
|
|
|
|
if (upgrade_to_loiter) {
|
|
if (!copter.motors->armed() || copter.flightmode->mode_number() != Mode::Number::ALT_HOLD) {
|
|
upgrade_to_loiter = false;
|
|
#if 0
|
|
AP_Notify::flags.hybrid_loiter = false;
|
|
#endif
|
|
} else if (copter.position_ok() && set_and_remember_mode(Mode::Number::LOITER, ModeReason::TOY_MODE)) {
|
|
#if AC_FENCE == ENABLED
|
|
copter.fence.enable(true);
|
|
#endif
|
|
gcs().send_text(MAV_SEVERITY_INFO, "Tmode: LOITER update");
|
|
}
|
|
}
|
|
|
|
if (copter.flightmode->mode_number() == Mode::Number::RTL && (flags & FLAG_RTL_CANCEL) && throttle_near_max) {
|
|
gcs().send_text(MAV_SEVERITY_INFO, "Tmode: RTL cancel");
|
|
set_and_remember_mode(Mode::Number::LOITER, ModeReason::TOY_MODE);
|
|
}
|
|
|
|
enum Mode::Number old_mode = copter.flightmode->mode_number();
|
|
enum Mode::Number new_mode = old_mode;
|
|
|
|
/*
|
|
implement actions
|
|
*/
|
|
switch (action) {
|
|
case ACTION_NONE:
|
|
break;
|
|
|
|
case ACTION_TAKE_PHOTO:
|
|
send_named_int("SNAPSHOT", 1);
|
|
break;
|
|
|
|
case ACTION_TOGGLE_VIDEO:
|
|
send_named_int("VIDEOTOG", 1);
|
|
break;
|
|
|
|
case ACTION_MODE_ACRO:
|
|
#if MODE_ACRO_ENABLED == ENABLED
|
|
new_mode = Mode::Number::ACRO;
|
|
#else
|
|
gcs().send_text(MAV_SEVERITY_ERROR, "Tmode: ACRO is disabled");
|
|
#endif
|
|
break;
|
|
|
|
case ACTION_MODE_ALTHOLD:
|
|
new_mode = Mode::Number::ALT_HOLD;
|
|
break;
|
|
|
|
case ACTION_MODE_AUTO:
|
|
new_mode = Mode::Number::AUTO;
|
|
break;
|
|
|
|
case ACTION_MODE_LOITER:
|
|
new_mode = Mode::Number::LOITER;
|
|
break;
|
|
|
|
case ACTION_MODE_RTL:
|
|
new_mode = Mode::Number::RTL;
|
|
break;
|
|
|
|
case ACTION_MODE_CIRCLE:
|
|
new_mode = Mode::Number::CIRCLE;
|
|
break;
|
|
|
|
case ACTION_MODE_LAND:
|
|
new_mode = Mode::Number::LAND;
|
|
break;
|
|
|
|
case ACTION_MODE_DRIFT:
|
|
new_mode = Mode::Number::DRIFT;
|
|
break;
|
|
|
|
case ACTION_MODE_SPORT:
|
|
new_mode = Mode::Number::SPORT;
|
|
break;
|
|
|
|
case ACTION_MODE_AUTOTUNE:
|
|
new_mode = Mode::Number::AUTOTUNE;
|
|
break;
|
|
|
|
case ACTION_MODE_POSHOLD:
|
|
new_mode = Mode::Number::POSHOLD;
|
|
break;
|
|
|
|
case ACTION_MODE_BRAKE:
|
|
new_mode = Mode::Number::BRAKE;
|
|
break;
|
|
|
|
case ACTION_MODE_THROW:
|
|
#if MODE_THROW_ENABLED == ENABLED
|
|
new_mode = Mode::Number::THROW;
|
|
#else
|
|
gcs().send_text(MAV_SEVERITY_ERROR, "Tmode: THROW is disabled");
|
|
#endif
|
|
break;
|
|
|
|
case ACTION_MODE_FLIP:
|
|
new_mode = Mode::Number::FLIP;
|
|
break;
|
|
|
|
case ACTION_MODE_STAB:
|
|
new_mode = Mode::Number::STABILIZE;
|
|
break;
|
|
|
|
case ACTION_MODE_FLOW:
|
|
// toggle flow hold
|
|
if (old_mode != Mode::Number::FLOWHOLD) {
|
|
new_mode = Mode::Number::FLOWHOLD;
|
|
} else {
|
|
new_mode = Mode::Number::ALT_HOLD;
|
|
}
|
|
break;
|
|
|
|
case ACTION_DISARM:
|
|
if (copter.motors->armed()) {
|
|
gcs().send_text(MAV_SEVERITY_ERROR, "Tmode: Force disarm");
|
|
copter.arming.disarm(AP_Arming::Method::TOYMODELANDFORCE);
|
|
}
|
|
break;
|
|
|
|
case ACTION_TOGGLE_MODE:
|
|
last_mode_choice = (last_mode_choice+1) % 2;
|
|
new_mode = Mode::Number(primary_mode[last_mode_choice].get());
|
|
break;
|
|
|
|
case ACTION_TOGGLE_SIMPLE:
|
|
copter.set_simple_mode(bool(copter.simple_mode)?Copter::SimpleMode::NONE:Copter::SimpleMode::SIMPLE);
|
|
break;
|
|
|
|
case ACTION_TOGGLE_SSIMPLE:
|
|
copter.set_simple_mode(bool(copter.simple_mode)?Copter::SimpleMode::NONE:Copter::SimpleMode::SUPERSIMPLE);
|
|
break;
|
|
|
|
case ACTION_ARM_LAND_RTL:
|
|
if (!copter.motors->armed()) {
|
|
action_arm();
|
|
} else if (old_mode == Mode::Number::RTL) {
|
|
// switch between RTL and LOITER when in GPS modes
|
|
new_mode = Mode::Number::LOITER;
|
|
} else if (old_mode == Mode::Number::LAND) {
|
|
if (last_set_mode == Mode::Number::LAND || !copter.position_ok()) {
|
|
// this is a land that we asked for, or we don't have good positioning
|
|
new_mode = Mode::Number::ALT_HOLD;
|
|
} else if (copter.landing_with_GPS()) {
|
|
new_mode = Mode::Number::LOITER;
|
|
} else {
|
|
new_mode = Mode::Number::ALT_HOLD;
|
|
}
|
|
} else if (copter.flightmode->requires_GPS()) {
|
|
// if we're in a GPS mode, then RTL
|
|
new_mode = Mode::Number::RTL;
|
|
} else {
|
|
// if we're in a non-GPS mode, then LAND
|
|
new_mode = Mode::Number::LAND;
|
|
}
|
|
break;
|
|
|
|
case ACTION_LOAD_TEST:
|
|
#if ENABLE_LOAD_TEST
|
|
if (copter.motors->armed() && !load_test.running) {
|
|
break;
|
|
}
|
|
if (load_test.running) {
|
|
load_test.running = false;
|
|
gcs().send_text(MAV_SEVERITY_INFO, "Tmode: load_test off");
|
|
copter.init_disarm_motors();
|
|
copter.set_mode(Mode::Number::ALT_HOLD, ModeReason::TOY_MODE);
|
|
} else {
|
|
copter.set_mode(Mode::Number::ALT_HOLD, ModeReason::TOY_MODE);
|
|
#if AC_FENCE == ENABLED
|
|
copter.fence.enable(false);
|
|
#endif
|
|
if (copter.arming.arm(AP_Arming::Method::MAVLINK)) {
|
|
load_test.running = true;
|
|
gcs().send_text(MAV_SEVERITY_INFO, "Tmode: load_test on");
|
|
} else {
|
|
gcs().send_text(MAV_SEVERITY_INFO, "Tmode: load_test failed");
|
|
}
|
|
}
|
|
#endif
|
|
break;
|
|
}
|
|
|
|
if (!copter.motors->armed() && (copter.flightmode->mode_number() == Mode::Number::LAND || copter.flightmode->mode_number() == Mode::Number::RTL)) {
|
|
// revert back to last primary flight mode if disarmed after landing
|
|
new_mode = Mode::Number(primary_mode[last_mode_choice].get());
|
|
}
|
|
|
|
if (new_mode != copter.flightmode->mode_number()) {
|
|
load_test.running = false;
|
|
#if AC_FENCE == ENABLED
|
|
copter.fence.enable(false);
|
|
#endif
|
|
if (set_and_remember_mode(new_mode, ModeReason::TOY_MODE)) {
|
|
gcs().send_text(MAV_SEVERITY_INFO, "Tmode: mode %s", copter.flightmode->name4());
|
|
// force fence on in all GPS flight modes
|
|
#if AC_FENCE == ENABLED
|
|
if (copter.flightmode->requires_GPS()) {
|
|
copter.fence.enable(true);
|
|
}
|
|
#endif
|
|
} else {
|
|
gcs().send_text(MAV_SEVERITY_ERROR, "Tmode: %u FAILED", (unsigned)new_mode);
|
|
if (new_mode == Mode::Number::RTL) {
|
|
// if we can't RTL then land
|
|
gcs().send_text(MAV_SEVERITY_ERROR, "Tmode: LANDING");
|
|
set_and_remember_mode(Mode::Number::LAND, ModeReason::TOY_MODE);
|
|
#if AC_FENCE == ENABLED
|
|
if (copter.landing_with_GPS()) {
|
|
copter.fence.enable(true);
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
set a mode, remembering what mode we set, and the previous mode we were in
|
|
*/
|
|
bool ToyMode::set_and_remember_mode(Mode::Number mode, ModeReason reason)
|
|
{
|
|
if (copter.flightmode->mode_number() == mode) {
|
|
return true;
|
|
}
|
|
if (!copter.set_mode(mode, reason)) {
|
|
return false;
|
|
}
|
|
last_set_mode = mode;
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
automatic stick trimming. This works while disarmed by looking for
|
|
zero rc-input changes for 4 seconds, and assuming sticks are
|
|
centered. Trim is saved
|
|
*/
|
|
void ToyMode::trim_update(void)
|
|
{
|
|
if (hal.util->get_soft_armed() || copter.failsafe.radio) {
|
|
// only when disarmed and with RC link
|
|
trim.start_ms = 0;
|
|
return;
|
|
}
|
|
|
|
// get throttle mid from channel trim
|
|
uint16_t throttle_trim = copter.channel_throttle->get_radio_trim();
|
|
if (abs(throttle_trim - 1500) <= trim_auto) {
|
|
RC_Channel *c = copter.channel_throttle;
|
|
uint16_t ch_min = c->get_radio_min();
|
|
uint16_t ch_max = c->get_radio_max();
|
|
// remember the throttle midpoint
|
|
int16_t new_value = 1000UL * (throttle_trim - ch_min) / (ch_max - ch_min);
|
|
if (new_value != throttle_mid) {
|
|
throttle_mid = new_value;
|
|
gcs().send_text(MAV_SEVERITY_ERROR, "Tmode: thr mid %d",
|
|
throttle_mid);
|
|
}
|
|
}
|
|
|
|
uint16_t chan[4];
|
|
if (rc().get_radio_in(chan, 4) != 4) {
|
|
trim.start_ms = 0;
|
|
return;
|
|
}
|
|
|
|
const uint16_t noise_limit = 2;
|
|
for (uint8_t i=0; i<4; i++) {
|
|
if (abs(chan[i] - 1500) > trim_auto) {
|
|
// not within limit
|
|
trim.start_ms = 0;
|
|
return;
|
|
}
|
|
}
|
|
|
|
uint32_t now = AP_HAL::millis();
|
|
|
|
if (trim.start_ms == 0) {
|
|
// start timer
|
|
memcpy(trim.chan, chan, 4*sizeof(uint16_t));
|
|
trim.start_ms = now;
|
|
return;
|
|
}
|
|
|
|
|
|
for (uint8_t i=0; i<4; i++) {
|
|
if (abs(trim.chan[i] - chan[i]) > noise_limit) {
|
|
// detected stick movement
|
|
memcpy(trim.chan, chan, 4*sizeof(uint16_t));
|
|
trim.start_ms = now;
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (now - trim.start_ms < 4000) {
|
|
// not steady for long enough yet
|
|
return;
|
|
}
|
|
|
|
// reset timer so we don't trigger too often
|
|
trim.start_ms = 0;
|
|
|
|
uint8_t need_trim = 0;
|
|
for (uint8_t i=0; i<4; i++) {
|
|
RC_Channel *c = RC_Channels::rc_channel(i);
|
|
if (c && abs(chan[i] - c->get_radio_trim()) > noise_limit) {
|
|
need_trim |= 1U<<i;
|
|
}
|
|
}
|
|
if (need_trim == 0) {
|
|
return;
|
|
}
|
|
for (uint8_t i=0; i<4; i++) {
|
|
if (need_trim & (1U<<i)) {
|
|
RC_Channel *c = RC_Channels::rc_channel(i);
|
|
c->set_and_save_radio_trim(chan[i]);
|
|
}
|
|
}
|
|
|
|
gcs().send_text(MAV_SEVERITY_ERROR, "Tmode: trim %u %u %u %u",
|
|
chan[0], chan[1], chan[2], chan[3]);
|
|
}
|
|
|
|
/*
|
|
handle arming action
|
|
*/
|
|
void ToyMode::action_arm(void)
|
|
{
|
|
bool needs_gps = copter.flightmode->requires_GPS();
|
|
|
|
// don't arm if sticks aren't in deadzone, to prevent pot problems
|
|
// on TX causing flight control issues
|
|
bool sticks_centered =
|
|
copter.channel_roll->get_control_in() == 0 &&
|
|
copter.channel_pitch->get_control_in() == 0 &&
|
|
copter.channel_yaw->get_control_in() == 0;
|
|
|
|
if (!sticks_centered) {
|
|
gcs().send_text(MAV_SEVERITY_ERROR, "Tmode: sticks not centered");
|
|
return;
|
|
}
|
|
|
|
arm_check_compass();
|
|
|
|
if (needs_gps && copter.arming.gps_checks(false)) {
|
|
#if AC_FENCE == ENABLED
|
|
// we want GPS and checks are passing, arm and enable fence
|
|
copter.fence.enable(true);
|
|
#endif
|
|
copter.arming.arm(AP_Arming::Method::RUDDER);
|
|
if (!copter.motors->armed()) {
|
|
AP_Notify::events.arming_failed = true;
|
|
gcs().send_text(MAV_SEVERITY_ERROR, "Tmode: GPS arming failed");
|
|
} else {
|
|
gcs().send_text(MAV_SEVERITY_ERROR, "Tmode: GPS armed motors");
|
|
}
|
|
} else if (needs_gps) {
|
|
// notify of arming fail
|
|
AP_Notify::events.arming_failed = true;
|
|
gcs().send_text(MAV_SEVERITY_ERROR, "Tmode: GPS arming failed");
|
|
} else {
|
|
#if AC_FENCE == ENABLED
|
|
// non-GPS mode
|
|
copter.fence.enable(false);
|
|
#endif
|
|
copter.arming.arm(AP_Arming::Method::RUDDER);
|
|
if (!copter.motors->armed()) {
|
|
AP_Notify::events.arming_failed = true;
|
|
gcs().send_text(MAV_SEVERITY_ERROR, "Tmode: non-GPS arming failed");
|
|
} else {
|
|
gcs().send_text(MAV_SEVERITY_ERROR, "Tmode: non-GPS armed motors");
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
adjust throttle for throttle takeoff
|
|
This prevents sudden climbs when using throttle for arming
|
|
*/
|
|
void ToyMode::throttle_adjust(float &throttle_control)
|
|
{
|
|
uint32_t now = AP_HAL::millis();
|
|
const uint32_t soft_start_ms = 5000;
|
|
const uint16_t throttle_start = 600 + copter.g.throttle_deadzone;
|
|
if (!copter.motors->armed() && (flags & FLAG_THR_ARM)) {
|
|
throttle_control = MIN(throttle_control, 500);
|
|
} else if (now - throttle_arm_ms < soft_start_ms) {
|
|
float p = (now - throttle_arm_ms) / float(soft_start_ms);
|
|
throttle_control = MIN(throttle_control, throttle_start + p * (1000 - throttle_start));
|
|
}
|
|
|
|
// limit descent rate close to the ground
|
|
float height = copter.inertial_nav.get_altitude() * 0.01 - copter.arming_altitude_m;
|
|
if (throttle_control < 500 &&
|
|
height < TOY_DESCENT_SLOW_HEIGHT + TOY_DESCENT_SLOW_RAMP &&
|
|
copter.motors->armed() && !copter.ap.land_complete) {
|
|
float limit = linear_interpolate(TOY_DESCENT_SLOW_MIN, 0, height,
|
|
TOY_DESCENT_SLOW_HEIGHT, TOY_DESCENT_SLOW_HEIGHT+TOY_DESCENT_SLOW_RAMP);
|
|
if (throttle_control < limit) {
|
|
// limit descent rate close to the ground
|
|
throttle_control = limit;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
update blinking. Blinking is done with a 16 bit pattern for each
|
|
LED. A count can be set for a pattern, which makes the pattern
|
|
persist until the count is zero. When it is zero the normal pattern
|
|
settings based on system status are used
|
|
*/
|
|
void ToyMode::blink_update(void)
|
|
{
|
|
if (red_blink_pattern & (1U<<red_blink_index)) {
|
|
copter.relay.on(1);
|
|
} else {
|
|
copter.relay.off(1);
|
|
}
|
|
if (green_blink_pattern & (1U<<green_blink_index)) {
|
|
copter.relay.on(0);
|
|
} else {
|
|
copter.relay.off(0);
|
|
}
|
|
green_blink_index = (green_blink_index+1) % 16;
|
|
red_blink_index = (red_blink_index+1) % 16;
|
|
if (green_blink_index == 0 && green_blink_count > 0) {
|
|
green_blink_count--;
|
|
}
|
|
if (red_blink_index == 0 && red_blink_count > 0) {
|
|
red_blink_count--;
|
|
}
|
|
|
|
// let the TX know we are recording video
|
|
uint32_t now = AP_HAL::millis();
|
|
if (now - last_video_ms < 1000) {
|
|
AP_Notify::flags.video_recording = 1;
|
|
} else {
|
|
AP_Notify::flags.video_recording = 0;
|
|
}
|
|
|
|
if (red_blink_count > 0 && green_blink_count > 0) {
|
|
return;
|
|
}
|
|
|
|
// setup normal patterns based on flight mode and arming
|
|
uint16_t pattern = 0;
|
|
|
|
// full on when we can see the TX, except for battery failsafe,
|
|
// when we blink rapidly
|
|
if (copter.motors->armed() && AP_Notify::flags.failsafe_battery) {
|
|
pattern = BLINK_8;
|
|
} else if (!copter.motors->armed() && (blink_disarm > 0)) {
|
|
pattern = BLINK_8;
|
|
blink_disarm--;
|
|
} else {
|
|
pattern = BLINK_FULL;
|
|
}
|
|
|
|
if (copter.motors->armed()) {
|
|
blink_disarm = 4;
|
|
}
|
|
|
|
if (red_blink_count == 0) {
|
|
red_blink_pattern = pattern;
|
|
}
|
|
if (green_blink_count == 0) {
|
|
green_blink_pattern = pattern;
|
|
}
|
|
if (red_blink_count == 0 && green_blink_count == 0) {
|
|
// get LEDs in sync
|
|
red_blink_index = green_blink_index;
|
|
}
|
|
}
|
|
|
|
// handle a mavlink message
|
|
void ToyMode::handle_message(const mavlink_message_t &msg)
|
|
{
|
|
if (msg.msgid != MAVLINK_MSG_ID_NAMED_VALUE_INT) {
|
|
return;
|
|
}
|
|
mavlink_named_value_int_t m;
|
|
mavlink_msg_named_value_int_decode(&msg, &m);
|
|
if (strncmp(m.name, "BLINKR", 10) == 0) {
|
|
red_blink_pattern = (uint16_t)m.value;
|
|
red_blink_count = m.value >> 16;
|
|
red_blink_index = 0;
|
|
} else if (strncmp(m.name, "BLINKG", 10) == 0) {
|
|
green_blink_pattern = (uint16_t)m.value;
|
|
green_blink_count = m.value >> 16;
|
|
green_blink_index = 0;
|
|
} else if (strncmp(m.name, "VNOTIFY", 10) == 0) {
|
|
// taking photos or video
|
|
if (green_blink_pattern != BLINK_2) {
|
|
green_blink_index = 0;
|
|
}
|
|
green_blink_pattern = BLINK_2;
|
|
green_blink_count = 1;
|
|
last_video_ms = AP_HAL::millis();
|
|
// immediately update AP_Notify recording flag
|
|
AP_Notify::flags.video_recording = 1;
|
|
} else if (strncmp(m.name, "WIFICHAN", 10) == 0) {
|
|
#if HAL_RCINPUT_WITH_AP_RADIO
|
|
AP_Radio *radio = AP_Radio::get_singleton();
|
|
if (radio) {
|
|
radio->set_wifi_channel(m.value);
|
|
}
|
|
#endif
|
|
} else if (strncmp(m.name, "LOGDISARM", 10) == 0) {
|
|
enum ap_var_type vtype;
|
|
AP_Int8 *log_disarmed = (AP_Int8 *)AP_Param::find("LOG_DISARMED", &vtype);
|
|
if (log_disarmed) {
|
|
log_disarmed->set(int8_t(m.value));
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
send a named int to primary telem channel
|
|
*/
|
|
void ToyMode::send_named_int(const char *name, int32_t value)
|
|
{
|
|
mavlink_msg_named_value_int_send(MAVLINK_COMM_1, AP_HAL::millis(), name, value);
|
|
}
|
|
|
|
/*
|
|
limit maximum thrust based on voltage
|
|
*/
|
|
void ToyMode::thrust_limiting(float *thrust, uint8_t num_motors)
|
|
{
|
|
float thrust_mul = linear_interpolate(filter.thrust_max, filter.thrust_min, filtered_voltage, filter.volt_min, filter.volt_max);
|
|
for (uint8_t i=0; i<num_motors; i++) {
|
|
thrust[i] *= thrust_mul;
|
|
}
|
|
uint16_t pwm[4];
|
|
hal.rcout->read(pwm, 4);
|
|
|
|
// @LoggerMessage: THST
|
|
// @Description: Maximum thrust limitation based on battery voltage in Toy Mode
|
|
// @Field: TimeUS: Time since system startup
|
|
// @Field: Vol: Filtered battery voltage
|
|
// @Field: Mul: Thrust multiplier between 0 and 1 to limit the output thrust based on battery voltage
|
|
// @Field: M1: Motor 1 pwm output
|
|
// @Field: M2: Motor 2 pwm output
|
|
// @Field: M3: Motor 3 pwm output
|
|
// @Field: M4: Motor 4 pwm output
|
|
|
|
if (motor_log_counter++ % 10 == 0) {
|
|
AP::logger().WriteStreaming("THST", "TimeUS,Vol,Mul,M1,M2,M3,M4", "QffHHHH",
|
|
AP_HAL::micros64(),
|
|
(double)filtered_voltage,
|
|
(double)thrust_mul,
|
|
pwm[0], pwm[1], pwm[2], pwm[3]);
|
|
}
|
|
|
|
}
|
|
|
|
#if ENABLE_LOAD_TEST
|
|
/*
|
|
run a motor load test - used for endurance checking in factory tests
|
|
*/
|
|
void ToyMode::load_test_run(void)
|
|
{
|
|
uint16_t pwm[4] {};
|
|
switch ((enum load_type)load_test.load_type.get()) {
|
|
case LOAD_TYPE_LOG1:
|
|
for (uint8_t i=0; i<4; i++) {
|
|
pwm[i] = load_data1[load_test.row].m[i];
|
|
}
|
|
load_test.filter_counter++;
|
|
if (load_test.filter_counter >= load_test.load_filter.get()) {
|
|
load_test.filter_counter = 0;
|
|
load_test.row = (load_test.row + 1) % ARRAY_SIZE(load_data1);
|
|
}
|
|
break;
|
|
|
|
case LOAD_TYPE_LOG2:
|
|
// like log1, but all the same
|
|
for (uint8_t i=0; i<4; i++) {
|
|
pwm[i] = load_data1[load_test.row].m[0];
|
|
}
|
|
load_test.filter_counter++;
|
|
if (load_test.filter_counter >= load_test.load_filter.get()) {
|
|
load_test.filter_counter = 0;
|
|
load_test.row = (load_test.row + 1) % ARRAY_SIZE(load_data1);
|
|
}
|
|
break;
|
|
|
|
case LOAD_TYPE_CONSTANT:
|
|
for (uint8_t i=0; i<4; i++) {
|
|
pwm[i] = 500;
|
|
}
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
for (uint8_t i=0; i<4; i++) {
|
|
pwm[i] *= load_test.load_mul;
|
|
// write, with conversion to 1000 to 2000 range
|
|
hal.rcout->write(i, 1000 + pwm[i]*2);
|
|
}
|
|
|
|
if (copter.failsafe.battery) {
|
|
gcs().send_text(MAV_SEVERITY_INFO, "Tmode: load_test off (battery)");
|
|
copter.init_disarm_motors();
|
|
load_test.running = false;
|
|
}
|
|
}
|
|
#endif // ENABLE_LOAD_TEST
|
|
|
|
/*
|
|
if we try to arm and the compass is out of range then we enable
|
|
inflight compass learning
|
|
*/
|
|
void ToyMode::arm_check_compass(void)
|
|
{
|
|
// check for unreasonable compass offsets
|
|
Vector3f offsets = copter.compass.get_offsets();
|
|
float field = copter.compass.get_field().length();
|
|
|
|
char unused_compass_configured_error_message[20];
|
|
if (offsets.length() > copter.compass.get_offsets_max() ||
|
|
field < 200 || field > 800 ||
|
|
!copter.compass.configured(unused_compass_configured_error_message, ARRAY_SIZE(unused_compass_configured_error_message))) {
|
|
if (copter.compass.get_learn_type() != Compass::LEARN_INFLIGHT) {
|
|
gcs().send_text(MAV_SEVERITY_INFO, "Tmode: enable compass learning");
|
|
copter.compass.set_learn_type(Compass::LEARN_INFLIGHT, false);
|
|
}
|
|
}
|
|
}
|
|
|
|
#endif // TOY_MODE_ENABLED
|