mirror of https://github.com/ArduPilot/ardupilot
554 lines
15 KiB
C++
554 lines
15 KiB
C++
#include <AP_HAL.h>
|
|
|
|
#if CONFIG_HAL_BOARD == HAL_BOARD_FLYMAPLE
|
|
|
|
#include "wirish.h"
|
|
#include "EEPROM.h"
|
|
|
|
/**
|
|
* @brief Check page for blank
|
|
* @param page base address
|
|
* @retval Success or error
|
|
* EEPROM_BAD_FLASH: page not empty after erase
|
|
* EEPROM_OK: page blank
|
|
*/
|
|
uint16 EEPROMClass::EE_CheckPage(uint32 pageBase, uint16 status)
|
|
{
|
|
uint32 pageEnd = pageBase + (uint32)PageSize;
|
|
|
|
// Page Status not EEPROM_ERASED and not a "state"
|
|
if ((*(__io uint16*)pageBase) != EEPROM_ERASED && (*(__io uint16*)pageBase) != status)
|
|
return EEPROM_BAD_FLASH;
|
|
for(pageBase += 4; pageBase < pageEnd; pageBase += 4)
|
|
if ((*(__io uint32*)pageBase) != 0xFFFFFFFF) // Verify if slot is empty
|
|
return EEPROM_BAD_FLASH;
|
|
return EEPROM_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Erase page with increment erase counter (page + 2)
|
|
* @param page base address
|
|
* @retval Success or error
|
|
* FLASH_COMPLETE: success erase
|
|
* - Flash error code: on write Flash error
|
|
*/
|
|
FLASH_Status EEPROMClass::EE_ErasePage(uint32 pageBase)
|
|
{
|
|
FLASH_Status FlashStatus;
|
|
uint16 data = (*(__io uint16*)(pageBase));
|
|
if ((data == EEPROM_ERASED) || (data == EEPROM_VALID_PAGE) || (data == EEPROM_RECEIVE_DATA))
|
|
data = (*(__io uint16*)(pageBase + 2)) + 1;
|
|
else
|
|
data = 0;
|
|
|
|
FlashStatus = FLASH_ErasePage(pageBase);
|
|
if (FlashStatus == FLASH_COMPLETE)
|
|
FlashStatus = FLASH_ProgramHalfWord(pageBase + 2, data);
|
|
|
|
return FlashStatus;
|
|
}
|
|
|
|
/**
|
|
* @brief Check page for blank and erase it
|
|
* @param page base address
|
|
* @retval Success or error
|
|
* - Flash error code: on write Flash error
|
|
* - EEPROM_BAD_FLASH: page not empty after erase
|
|
* - EEPROM_OK: page blank
|
|
*/
|
|
uint16 EEPROMClass::EE_CheckErasePage(uint32 pageBase, uint16 status)
|
|
{
|
|
uint16 FlashStatus;
|
|
if (EE_CheckPage(pageBase, status) != EEPROM_OK)
|
|
{
|
|
FlashStatus = EE_ErasePage(pageBase);
|
|
if (FlashStatus != FLASH_COMPLETE)
|
|
return FlashStatus;
|
|
return EE_CheckPage(pageBase, status);
|
|
}
|
|
return EEPROM_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Find valid Page for write or read operation
|
|
* @param Page0: Page0 base address
|
|
* Page1: Page1 base address
|
|
* @retval Valid page address (PAGE0 or PAGE1) or NULL in case of no valid page was found
|
|
*/
|
|
uint32 EEPROMClass::EE_FindValidPage(void)
|
|
{
|
|
uint16 status0 = (*(__io uint16*)PageBase0); // Get Page0 actual status
|
|
uint16 status1 = (*(__io uint16*)PageBase1); // Get Page1 actual status
|
|
|
|
if (status0 == EEPROM_VALID_PAGE && status1 == EEPROM_ERASED)
|
|
return PageBase0;
|
|
if (status1 == EEPROM_VALID_PAGE && status0 == EEPROM_ERASED)
|
|
return PageBase1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* @brief Calculate unique variables in EEPROM
|
|
* @param start: address of first slot to check (page + 4)
|
|
* @param end: page end address
|
|
* @param address: 16 bit virtual address of the variable to excluse (or 0XFFFF)
|
|
* @retval count of variables
|
|
*/
|
|
uint16 EEPROMClass::EE_GetVariablesCount(uint32 pageBase, uint16 skipAddress)
|
|
{
|
|
uint16 varAddress, nextAddress;
|
|
uint32 idx;
|
|
uint32 pageEnd = pageBase + (uint32)PageSize;
|
|
uint16 mycount = 0;
|
|
|
|
for (pageBase += 6; pageBase < pageEnd; pageBase += 4)
|
|
{
|
|
varAddress = (*(__io uint16*)pageBase);
|
|
if (varAddress == 0xFFFF || varAddress == skipAddress)
|
|
continue;
|
|
|
|
mycount++;
|
|
for(idx = pageBase + 4; idx < pageEnd; idx += 4)
|
|
{
|
|
nextAddress = (*(__io uint16*)idx);
|
|
if (nextAddress == varAddress)
|
|
{
|
|
mycount--;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
return mycount;
|
|
}
|
|
|
|
/**
|
|
* @brief Transfers last updated variables data from the full Page to an empty one.
|
|
* @param newPage: new page base address
|
|
* @param oldPage: old page base address
|
|
* @param SkipAddress: 16 bit virtual address of the variable (or 0xFFFF)
|
|
* @retval Success or error status:
|
|
* - FLASH_COMPLETE: on success
|
|
* - EEPROM_OUT_SIZE: if valid new page is full
|
|
* - Flash error code: on write Flash error
|
|
*/
|
|
uint16 EEPROMClass::EE_PageTransfer(uint32 newPage, uint32 oldPage, uint16 SkipAddress)
|
|
{
|
|
uint32 oldEnd, newEnd;
|
|
uint32 oldIdx, newIdx, idx;
|
|
uint16 address, data, found;
|
|
FLASH_Status FlashStatus;
|
|
|
|
// Transfer process: transfer variables from old to the new active page
|
|
newEnd = newPage + ((uint32)PageSize);
|
|
|
|
// Find first free element in new page
|
|
for (newIdx = newPage + 4; newIdx < newEnd; newIdx += 4)
|
|
if ((*(__io uint32*)newIdx) == 0xFFFFFFFF) // Verify if element
|
|
break; // contents are 0xFFFFFFFF
|
|
if (newIdx >= newEnd)
|
|
return EEPROM_OUT_SIZE;
|
|
|
|
oldEnd = oldPage + 4;
|
|
oldIdx = oldPage + (uint32)(PageSize - 2);
|
|
|
|
for (; oldIdx > oldEnd; oldIdx -= 4)
|
|
{
|
|
address = *(__io uint16*)oldIdx;
|
|
if (address == 0xFFFF || address == SkipAddress)
|
|
continue; // it's means that power off after write data
|
|
|
|
found = 0;
|
|
for (idx = newPage + 6; idx < newIdx; idx += 4)
|
|
if ((*(__io uint16*)(idx)) == address)
|
|
{
|
|
found = 1;
|
|
break;
|
|
}
|
|
|
|
if (found)
|
|
continue;
|
|
|
|
if (newIdx < newEnd)
|
|
{
|
|
data = (*(__io uint16*)(oldIdx - 2));
|
|
|
|
FlashStatus = FLASH_ProgramHalfWord(newIdx, data);
|
|
if (FlashStatus != FLASH_COMPLETE)
|
|
return FlashStatus;
|
|
|
|
FlashStatus = FLASH_ProgramHalfWord(newIdx + 2, address);
|
|
if (FlashStatus != FLASH_COMPLETE)
|
|
return FlashStatus;
|
|
|
|
newIdx += 4;
|
|
}
|
|
else
|
|
return EEPROM_OUT_SIZE;
|
|
}
|
|
|
|
// Erase the old Page: Set old Page status to EEPROM_EEPROM_ERASED status
|
|
data = EE_CheckErasePage(oldPage, EEPROM_ERASED);
|
|
if (data != EEPROM_OK)
|
|
return data;
|
|
|
|
// Set new Page status
|
|
FlashStatus = FLASH_ProgramHalfWord(newPage, EEPROM_VALID_PAGE);
|
|
if (FlashStatus != FLASH_COMPLETE)
|
|
return FlashStatus;
|
|
|
|
return EEPROM_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Verify if active page is full and Writes variable in EEPROM.
|
|
* @param Address: 16 bit virtual address of the variable
|
|
* @param Data: 16 bit data to be written as variable value
|
|
* @retval Success or error status:
|
|
* - FLASH_COMPLETE: on success
|
|
* - EEPROM_PAGE_FULL: if valid page is full (need page transfer)
|
|
* - EEPROM_NO_VALID_PAGE: if no valid page was found
|
|
* - EEPROM_OUT_SIZE: if EEPROM size exceeded
|
|
* - Flash error code: on write Flash error
|
|
*/
|
|
uint16 EEPROMClass::EE_VerifyPageFullWriteVariable(uint16 Address, uint16 Data)
|
|
{
|
|
FLASH_Status FlashStatus;
|
|
uint32 idx, pageBase, pageEnd, newPage;
|
|
uint16 mycount;
|
|
|
|
// Get valid Page for write operation
|
|
pageBase = EE_FindValidPage();
|
|
if (pageBase == 0)
|
|
return EEPROM_NO_VALID_PAGE;
|
|
|
|
// Get the valid Page end Address
|
|
pageEnd = pageBase + PageSize; // Set end of page
|
|
|
|
for (idx = pageEnd - 2; idx > pageBase; idx -= 4)
|
|
{
|
|
if ((*(__io uint16*)idx) == Address) // Find last value for address
|
|
{
|
|
mycount = (*(__io uint16*)(idx - 2)); // Read last data
|
|
if (mycount == Data)
|
|
return EEPROM_OK;
|
|
if (mycount == 0xFFFF)
|
|
{
|
|
FlashStatus = FLASH_ProgramHalfWord(idx - 2, Data); // Set variable data
|
|
if (FlashStatus == FLASH_COMPLETE)
|
|
return EEPROM_OK;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
// Check each active page address starting from begining
|
|
for (idx = pageBase + 4; idx < pageEnd; idx += 4)
|
|
if ((*(__io uint32*)idx) == 0xFFFFFFFF) // Verify if element
|
|
{ // contents are 0xFFFFFFFF
|
|
FlashStatus = FLASH_ProgramHalfWord(idx, Data); // Set variable data
|
|
if (FlashStatus != FLASH_COMPLETE)
|
|
return FlashStatus;
|
|
FlashStatus = FLASH_ProgramHalfWord(idx + 2, Address); // Set variable virtual address
|
|
if (FlashStatus != FLASH_COMPLETE)
|
|
return FlashStatus;
|
|
return EEPROM_OK;
|
|
}
|
|
|
|
// Empty slot not found, need page transfer
|
|
// Calculate unique variables in page
|
|
mycount = EE_GetVariablesCount(pageBase, Address) + 1;
|
|
if (mycount >= (PageSize / 4 - 1))
|
|
return EEPROM_OUT_SIZE;
|
|
|
|
if (pageBase == PageBase1)
|
|
newPage = PageBase0; // New page address where variable will be moved to
|
|
else
|
|
newPage = PageBase1;
|
|
|
|
// Set the new Page status to RECEIVE_DATA status
|
|
FlashStatus = FLASH_ProgramHalfWord(newPage, EEPROM_RECEIVE_DATA);
|
|
if (FlashStatus != FLASH_COMPLETE)
|
|
return FlashStatus;
|
|
|
|
// Write the variable passed as parameter in the new active page
|
|
FlashStatus = FLASH_ProgramHalfWord(newPage + 4, Data);
|
|
if (FlashStatus != FLASH_COMPLETE)
|
|
return FlashStatus;
|
|
|
|
FlashStatus = FLASH_ProgramHalfWord(newPage + 6, Address);
|
|
if (FlashStatus != FLASH_COMPLETE)
|
|
return FlashStatus;
|
|
|
|
return EE_PageTransfer(newPage, pageBase, Address);
|
|
}
|
|
|
|
EEPROMClass::EEPROMClass(void)
|
|
{
|
|
PageBase0 = EEPROM_PAGE0_BASE;
|
|
PageBase1 = EEPROM_PAGE1_BASE;
|
|
PageSize = EEPROM_PAGE_SIZE;
|
|
Status = EEPROM_NOT_INIT;
|
|
}
|
|
|
|
uint16 EEPROMClass::init(uint32 pageBase0, uint32 pageBase1, uint32 pageSize)
|
|
{
|
|
PageBase0 = pageBase0;
|
|
PageBase1 = pageBase1;
|
|
PageSize = pageSize;
|
|
return init();
|
|
}
|
|
|
|
uint16 EEPROMClass::init(void)
|
|
{
|
|
uint16 status0, status1;
|
|
FLASH_Status FlashStatus;
|
|
|
|
FLASH_Unlock();
|
|
Status = EEPROM_NO_VALID_PAGE;
|
|
|
|
status0 = (*(__io uint16 *)PageBase0);
|
|
status1 = (*(__io uint16 *)PageBase1);
|
|
|
|
switch (status0)
|
|
{
|
|
/*
|
|
Page0 Page1
|
|
----- -----
|
|
EEPROM_ERASED EEPROM_VALID_PAGE Page1 valid, Page0 erased
|
|
EEPROM_RECEIVE_DATA Page1 need set to valid, Page0 erased
|
|
EEPROM_ERASED make EE_Format
|
|
any Error: EEPROM_NO_VALID_PAGE
|
|
*/
|
|
case EEPROM_ERASED:
|
|
if (status1 == EEPROM_VALID_PAGE) // Page0 erased, Page1 valid
|
|
Status = EE_CheckErasePage(PageBase0, EEPROM_ERASED);
|
|
else if (status1 == EEPROM_RECEIVE_DATA) // Page0 erased, Page1 receive
|
|
{
|
|
FlashStatus = FLASH_ProgramHalfWord(PageBase1, EEPROM_VALID_PAGE);
|
|
if (FlashStatus != FLASH_COMPLETE)
|
|
Status = FlashStatus;
|
|
else
|
|
Status = EE_CheckErasePage(PageBase0, EEPROM_ERASED);
|
|
}
|
|
else if (status1 == EEPROM_ERASED) // Both in erased state so format EEPROM
|
|
Status = format();
|
|
break;
|
|
/*
|
|
Page0 Page1
|
|
----- -----
|
|
EEPROM_RECEIVE_DATA EEPROM_VALID_PAGE Transfer Page1 to Page0
|
|
EEPROM_ERASED Page0 need set to valid, Page1 erased
|
|
any EEPROM_NO_VALID_PAGE
|
|
*/
|
|
case EEPROM_RECEIVE_DATA:
|
|
if (status1 == EEPROM_VALID_PAGE) // Page0 receive, Page1 valid
|
|
Status = EE_PageTransfer(PageBase0, PageBase1, 0xFFFF);
|
|
else if (status1 == EEPROM_ERASED) // Page0 receive, Page1 erased
|
|
{
|
|
Status = EE_CheckErasePage(PageBase1, EEPROM_ERASED);
|
|
if (Status == EEPROM_OK)
|
|
{
|
|
FlashStatus = FLASH_ProgramHalfWord(PageBase0, EEPROM_VALID_PAGE);
|
|
if (FlashStatus != FLASH_COMPLETE)
|
|
Status = FlashStatus;
|
|
else
|
|
Status = EEPROM_OK;
|
|
}
|
|
}
|
|
break;
|
|
/*
|
|
Page0 Page1
|
|
----- -----
|
|
EEPROM_VALID_PAGE EEPROM_VALID_PAGE Error: EEPROM_NO_VALID_PAGE
|
|
EEPROM_RECEIVE_DATA Transfer Page0 to Page1
|
|
any Page0 valid, Page1 erased
|
|
*/
|
|
case EEPROM_VALID_PAGE:
|
|
if (status1 == EEPROM_VALID_PAGE) // Both pages valid
|
|
Status = EEPROM_NO_VALID_PAGE;
|
|
else if (status1 == EEPROM_RECEIVE_DATA)
|
|
Status = EE_PageTransfer(PageBase1, PageBase0, 0xFFFF);
|
|
else
|
|
Status = EE_CheckErasePage(PageBase1, EEPROM_ERASED);
|
|
break;
|
|
/*
|
|
Page0 Page1
|
|
----- -----
|
|
any EEPROM_VALID_PAGE Page1 valid, Page0 erased
|
|
EEPROM_RECEIVE_DATA Page1 valid, Page0 erased
|
|
any EEPROM_NO_VALID_PAGE
|
|
*/
|
|
default:
|
|
if (status1 == EEPROM_VALID_PAGE)
|
|
Status = EE_CheckErasePage(PageBase0, EEPROM_ERASED); // Check/Erase Page0
|
|
else if (status1 == EEPROM_RECEIVE_DATA)
|
|
{
|
|
FlashStatus = FLASH_ProgramHalfWord(PageBase1, EEPROM_VALID_PAGE);
|
|
if (FlashStatus != FLASH_COMPLETE)
|
|
Status = FlashStatus;
|
|
else
|
|
Status = EE_CheckErasePage(PageBase0, EEPROM_ERASED);
|
|
}
|
|
break;
|
|
}
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
* @brief Erases PAGE0 and PAGE1 and writes EEPROM_VALID_PAGE / 0 header to PAGE0
|
|
* @param PAGE0 and PAGE1 base addresses
|
|
* @retval Status of the last operation (Flash write or erase) done during EEPROM formating
|
|
*/
|
|
uint16 EEPROMClass::format(void)
|
|
{
|
|
uint16 status;
|
|
FLASH_Status FlashStatus;
|
|
|
|
FLASH_Unlock();
|
|
|
|
// Erase Page0
|
|
status = EE_CheckErasePage(PageBase0, EEPROM_VALID_PAGE);
|
|
if (status != EEPROM_OK)
|
|
return status;
|
|
if ((*(__io uint16*)PageBase0) == EEPROM_ERASED)
|
|
{
|
|
// Set Page0 as valid page: Write VALID_PAGE at Page0 base address
|
|
FlashStatus = FLASH_ProgramHalfWord(PageBase0, EEPROM_VALID_PAGE);
|
|
if (FlashStatus != FLASH_COMPLETE)
|
|
return FlashStatus;
|
|
}
|
|
// Erase Page1
|
|
return EE_CheckErasePage(PageBase1, EEPROM_ERASED);
|
|
}
|
|
|
|
/**
|
|
* @brief Returns the erase counter for current page
|
|
* @param Data: Global variable contains the read variable value
|
|
* @retval Success or error status:
|
|
* - EEPROM_OK: if erases counter return.
|
|
* - EEPROM_NO_VALID_PAGE: if no valid page was found.
|
|
*/
|
|
uint16 EEPROMClass::erases(uint16 *Erases)
|
|
{
|
|
uint32 pageBase;
|
|
if (Status != EEPROM_OK)
|
|
if (init() != EEPROM_OK)
|
|
return Status;
|
|
|
|
// Get active Page for read operation
|
|
pageBase = EE_FindValidPage();
|
|
if (pageBase == 0)
|
|
return EEPROM_NO_VALID_PAGE;
|
|
|
|
*Erases = (*(__io uint16*)pageBase+2);
|
|
return EEPROM_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Returns the last stored variable data, if found,
|
|
* which correspond to the passed virtual address
|
|
* @param Address: Variable virtual address
|
|
* @retval Data for variable or EEPROM_DEFAULT_DATA, if any errors
|
|
*/
|
|
uint16 EEPROMClass::read (uint16 Address)
|
|
{
|
|
uint16 data;
|
|
read(Address, &data);
|
|
return data;
|
|
}
|
|
|
|
/**
|
|
* @brief Returns the last stored variable data, if found,
|
|
* which correspond to the passed virtual address
|
|
* @param Address: Variable virtual address
|
|
* @param Data: Pointer to data variable
|
|
* @retval Success or error status:
|
|
* - EEPROM_OK: if variable was found
|
|
* - EEPROM_BAD_ADDRESS: if the variable was not found
|
|
* - EEPROM_NO_VALID_PAGE: if no valid page was found.
|
|
*/
|
|
uint16 EEPROMClass::read(uint16 Address, uint16 *Data)
|
|
{
|
|
uint32 pageBase, pageEnd;
|
|
|
|
// Set default data (empty EEPROM)
|
|
*Data = EEPROM_DEFAULT_DATA;
|
|
|
|
if (Status == EEPROM_NOT_INIT)
|
|
if (init() != EEPROM_OK)
|
|
return Status;
|
|
|
|
// Get active Page for read operation
|
|
pageBase = EE_FindValidPage();
|
|
if (pageBase == 0)
|
|
return EEPROM_NO_VALID_PAGE;
|
|
|
|
// Get the valid Page end Address
|
|
pageEnd = pageBase + ((uint32)(PageSize - 2));
|
|
|
|
// Check each active page address starting from end
|
|
for (pageBase += 6; pageEnd >= pageBase; pageEnd -= 4)
|
|
if ((*(__io uint16*)pageEnd) == Address) // Compare the read address with the virtual address
|
|
{
|
|
*Data = (*(__io uint16*)(pageEnd - 2)); // Get content of Address-2 which is variable value
|
|
return EEPROM_OK;
|
|
}
|
|
|
|
// Return ReadStatus value: (0: variable exist, 1: variable doesn't exist)
|
|
return EEPROM_BAD_ADDRESS;
|
|
}
|
|
|
|
/**
|
|
* @brief Writes/upadtes variable data in EEPROM.
|
|
* @param VirtAddress: Variable virtual address
|
|
* @param Data: 16 bit data to be written
|
|
* @retval Success or error status:
|
|
* - FLASH_COMPLETE: on success
|
|
* - EEPROM_BAD_ADDRESS: if address = 0xFFFF
|
|
* - EEPROM_PAGE_FULL: if valid page is full
|
|
* - EEPROM_NO_VALID_PAGE: if no valid page was found
|
|
* - EEPROM_OUT_SIZE: if no empty EEPROM variables
|
|
* - Flash error code: on write Flash error
|
|
*/
|
|
uint16 EEPROMClass::write(uint16 Address, uint16 Data)
|
|
{
|
|
if (Status == EEPROM_NOT_INIT)
|
|
if (init() != EEPROM_OK)
|
|
return Status;
|
|
|
|
if (Address == 0xFFFF)
|
|
return EEPROM_BAD_ADDRESS;
|
|
|
|
// Write the variable virtual address and value in the EEPROM
|
|
uint16 status = EE_VerifyPageFullWriteVariable(Address, Data);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Return number of variable
|
|
* @retval Number of variables
|
|
*/
|
|
uint16 EEPROMClass::count(uint16 *Count)
|
|
{
|
|
if (Status == EEPROM_NOT_INIT)
|
|
if (init() != EEPROM_OK)
|
|
return Status;
|
|
|
|
// Get valid Page for write operation
|
|
uint32 pageBase = EE_FindValidPage();
|
|
if (pageBase == 0)
|
|
return EEPROM_NO_VALID_PAGE; // No valid page, return max. numbers
|
|
|
|
*Count = EE_GetVariablesCount(pageBase, 0xFFFF);
|
|
return EEPROM_OK;
|
|
}
|
|
|
|
uint16 EEPROMClass::maxcount(void)
|
|
{
|
|
return ((PageSize / 4)-1);
|
|
}
|
|
|
|
EEPROMClass EEPROM;
|
|
#endif
|