mirror of https://github.com/ArduPilot/ardupilot
314 lines
8.8 KiB
C++
314 lines
8.8 KiB
C++
/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
|
||
/*
|
||
DataFlash_APM1.cpp - DataFlash log library for AT45DB161
|
||
Code by Jordi Munoz and Jose Julio. DIYDrones.com
|
||
This code works with boards based on ATMega168/328 and ATMega1280/2560 using SPI port
|
||
|
||
This library is free software; you can redistribute it and/or
|
||
modify it under the terms of the GNU Lesser General Public
|
||
License as published by the Free Software Foundation; either
|
||
version 2.1 of the License, or (at your option) any later version.
|
||
|
||
Dataflash library for AT45DB161D flash memory
|
||
Memory organization : 4096 pages of 512 bytes or 528 bytes
|
||
|
||
Maximun write bandwidth : 512 bytes in 14ms
|
||
This code is written so the master never has to wait to write the data on the eeprom
|
||
|
||
Methods:
|
||
Init() : Library initialization (SPI initialization)
|
||
StartWrite(page) : Start a write session. page=start page.
|
||
WriteByte(data) : Write a byte
|
||
WriteInt(data) : Write an integer (2 bytes)
|
||
WriteLong(data) : Write a long (4 bytes)
|
||
StartRead(page) : Start a read on (page)
|
||
GetWritePage() : Returns the last page written to
|
||
GetPage() : Returns the last page read
|
||
ReadByte()
|
||
ReadInt()
|
||
ReadLong()
|
||
|
||
Properties:
|
||
|
||
*/
|
||
|
||
#include <stdint.h>
|
||
#include "DataFlash.h"
|
||
#include <SPI.h>
|
||
|
||
// flash size
|
||
#define DF_LAST_PAGE 4096
|
||
|
||
// arduino mega SPI pins
|
||
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||
#define DF_DATAOUT 51 // MOSI
|
||
#define DF_DATAIN 50 // MISO
|
||
#define DF_SPICLOCK 52 // SCK
|
||
#define DF_SLAVESELECT 53 // SS (PB0)
|
||
#define DF_RESET 31 // RESET (PC6)
|
||
#else // normal arduino SPI pins...
|
||
#define DF_DATAOUT 11 //MOSI
|
||
#define DF_DATAIN 12 //MISO
|
||
#define DF_SPICLOCK 13 //SCK
|
||
#define DF_SLAVESELECT 10 //SS
|
||
#endif
|
||
|
||
// AT45DB161D Commands (from Datasheet)
|
||
#define DF_TRANSFER_PAGE_TO_BUFFER_1 0x53
|
||
#define DF_TRANSFER_PAGE_TO_BUFFER_2 0x55
|
||
#define DF_STATUS_REGISTER_READ 0xD7
|
||
#define DF_READ_MANUFACTURER_AND_DEVICE_ID 0x9F
|
||
#define DF_PAGE_READ 0xD2
|
||
#define DF_BUFFER_1_READ 0xD4
|
||
#define DF_BUFFER_2_READ 0xD6
|
||
#define DF_BUFFER_1_WRITE 0x84
|
||
#define DF_BUFFER_2_WRITE 0x87
|
||
#define DF_BUFFER_1_TO_PAGE_WITH_ERASE 0x83
|
||
#define DF_BUFFER_2_TO_PAGE_WITH_ERASE 0x86
|
||
#define DF_PAGE_ERASE 0x81
|
||
#define DF_BLOCK_ERASE 0x50
|
||
#define DF_SECTOR_ERASE 0x7C
|
||
#define DF_CHIP_ERASE_0 0xC7
|
||
#define DF_CHIP_ERASE_1 0x94
|
||
#define DF_CHIP_ERASE_2 0x80
|
||
#define DF_CHIP_ERASE_3 0x9A
|
||
|
||
// *** INTERNAL FUNCTIONS ***
|
||
|
||
void dataflash_CS_inactive()
|
||
{
|
||
digitalWrite(DF_SLAVESELECT,HIGH); //disable device
|
||
}
|
||
|
||
void dataflash_CS_active()
|
||
{
|
||
digitalWrite(DF_SLAVESELECT,LOW); //enable device
|
||
}
|
||
|
||
// Constructors ////////////////////////////////////////////////////////////////
|
||
DataFlash_APM1::DataFlash_APM1()
|
||
{
|
||
}
|
||
|
||
// Public Methods //////////////////////////////////////////////////////////////
|
||
void DataFlash_APM1::Init(void)
|
||
{
|
||
pinMode(DF_DATAOUT, OUTPUT);
|
||
pinMode(DF_DATAIN, INPUT);
|
||
pinMode(DF_SPICLOCK,OUTPUT);
|
||
pinMode(DF_SLAVESELECT,OUTPUT);
|
||
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||
pinMode(DF_RESET,OUTPUT);
|
||
// Reset the chip
|
||
digitalWrite(DF_RESET,LOW);
|
||
delay(1);
|
||
digitalWrite(DF_RESET,HIGH);
|
||
#endif
|
||
|
||
dataflash_CS_inactive(); //disable device
|
||
|
||
// Setup SPI Master, Mode 3, fosc/4 = 4MHz
|
||
SPI.begin();
|
||
SPI.setBitOrder(MSBFIRST);
|
||
SPI.setDataMode(SPI_MODE3);
|
||
SPI.setClockDivider(SPI_CLOCK_DIV2);
|
||
|
||
// get page size: 512 or 528
|
||
df_PageSize=PageSize();
|
||
|
||
// the last page is reserved for config information
|
||
df_NumPages = DF_LAST_PAGE - 1;
|
||
}
|
||
|
||
// This function is mainly to test the device
|
||
void DataFlash_APM1::ReadManufacturerID()
|
||
{
|
||
dataflash_CS_active(); // activate dataflash command decoder
|
||
|
||
// Read manufacturer and ID command...
|
||
SPI.transfer(DF_READ_MANUFACTURER_AND_DEVICE_ID);
|
||
|
||
df_manufacturer = SPI.transfer(0xff);
|
||
df_device = SPI.transfer(0xff);
|
||
df_device = (df_device<<8) | SPI.transfer(0xff);
|
||
SPI.transfer(0xff);
|
||
|
||
dataflash_CS_inactive(); // Reset dataflash command decoder
|
||
}
|
||
|
||
|
||
bool DataFlash_APM1::CardInserted(void)
|
||
{
|
||
return true;
|
||
}
|
||
|
||
// Read the status register
|
||
byte DataFlash_APM1::ReadStatusReg()
|
||
{
|
||
byte tmp;
|
||
|
||
dataflash_CS_active(); // activate dataflash command decoder
|
||
|
||
// Read status command
|
||
SPI.transfer(DF_STATUS_REGISTER_READ);
|
||
tmp = SPI.transfer(0x00); // We only want to extract the READY/BUSY bit
|
||
|
||
dataflash_CS_inactive(); // Reset dataflash command decoder
|
||
|
||
return tmp;
|
||
}
|
||
|
||
// Read the status of the DataFlash
|
||
inline
|
||
byte DataFlash_APM1::ReadStatus()
|
||
{
|
||
return(ReadStatusReg()&0x80); // We only want to extract the READY/BUSY bit
|
||
}
|
||
|
||
|
||
inline
|
||
uint16_t DataFlash_APM1::PageSize()
|
||
{
|
||
return(528-((ReadStatusReg()&0x01)<<4)); // if first bit 1 trhen 512 else 528 bytes
|
||
}
|
||
|
||
|
||
// Wait until DataFlash is in ready state...
|
||
void DataFlash_APM1::WaitReady()
|
||
{
|
||
while(!ReadStatus());
|
||
}
|
||
|
||
void DataFlash_APM1::PageToBuffer(unsigned char BufferNum, uint16_t PageAdr)
|
||
{
|
||
dataflash_CS_active(); // activate dataflash command decoder
|
||
|
||
if (BufferNum==1)
|
||
SPI.transfer(DF_TRANSFER_PAGE_TO_BUFFER_1);
|
||
else
|
||
SPI.transfer(DF_TRANSFER_PAGE_TO_BUFFER_2);
|
||
|
||
if(df_PageSize==512){
|
||
SPI.transfer((unsigned char)(PageAdr >> 7));
|
||
SPI.transfer((unsigned char)(PageAdr << 1));
|
||
}else{
|
||
SPI.transfer((unsigned char)(PageAdr >> 6));
|
||
SPI.transfer((unsigned char)(PageAdr << 2));
|
||
}
|
||
SPI.transfer(0x00); // don´t care bytes
|
||
|
||
dataflash_CS_inactive(); //initiate the transfer
|
||
dataflash_CS_active();
|
||
|
||
while(!ReadStatus()); //monitor the status register, wait until busy-flag is high
|
||
|
||
dataflash_CS_inactive();
|
||
|
||
}
|
||
|
||
void DataFlash_APM1::BufferToPage (unsigned char BufferNum, uint16_t PageAdr, unsigned char wait)
|
||
{
|
||
dataflash_CS_active(); // activate dataflash command decoder
|
||
|
||
if (BufferNum==1)
|
||
SPI.transfer(DF_BUFFER_1_TO_PAGE_WITH_ERASE);
|
||
else
|
||
SPI.transfer(DF_BUFFER_2_TO_PAGE_WITH_ERASE);
|
||
|
||
if(df_PageSize==512){
|
||
SPI.transfer((unsigned char)(PageAdr >> 7));
|
||
SPI.transfer((unsigned char)(PageAdr << 1));
|
||
}else{
|
||
SPI.transfer((unsigned char)(PageAdr >> 6));
|
||
SPI.transfer((unsigned char)(PageAdr << 2));
|
||
}
|
||
SPI.transfer(0x00); // don´t care bytes
|
||
|
||
dataflash_CS_inactive(); //initiate the transfer
|
||
dataflash_CS_active();
|
||
|
||
// Check if we need to wait to write the buffer to memory or we can continue...
|
||
if (wait)
|
||
while(!ReadStatus()); //monitor the status register, wait until busy-flag is high
|
||
|
||
dataflash_CS_inactive(); //deactivate dataflash command decoder
|
||
}
|
||
|
||
void DataFlash_APM1::BufferWrite (unsigned char BufferNum, uint16_t IntPageAdr, unsigned char Data)
|
||
{
|
||
dataflash_CS_active(); // activate dataflash command decoder
|
||
|
||
if (BufferNum==1)
|
||
SPI.transfer(DF_BUFFER_1_WRITE);
|
||
else
|
||
SPI.transfer(DF_BUFFER_2_WRITE);
|
||
SPI.transfer(0x00); //don't cares
|
||
SPI.transfer((unsigned char)(IntPageAdr>>8)); //upper part of internal buffer address
|
||
SPI.transfer((unsigned char)(IntPageAdr)); //lower part of internal buffer address
|
||
SPI.transfer(Data); //write data byte
|
||
|
||
dataflash_CS_inactive(); // disable dataflash command decoder
|
||
}
|
||
|
||
unsigned char DataFlash_APM1::BufferRead (unsigned char BufferNum, uint16_t IntPageAdr)
|
||
{
|
||
byte tmp;
|
||
|
||
dataflash_CS_active(); // activate dataflash command decoder
|
||
|
||
if (BufferNum==1)
|
||
SPI.transfer(DF_BUFFER_1_READ);
|
||
else
|
||
SPI.transfer(DF_BUFFER_2_READ);
|
||
SPI.transfer(0x00); //don't cares
|
||
SPI.transfer((unsigned char)(IntPageAdr>>8)); //upper part of internal buffer address
|
||
SPI.transfer((unsigned char)(IntPageAdr)); //lower part of internal buffer address
|
||
SPI.transfer(0x00); //don't cares
|
||
tmp = SPI.transfer(0x00); //read data byte
|
||
|
||
dataflash_CS_inactive(); // deactivate dataflash command decoder
|
||
|
||
return (tmp);
|
||
}
|
||
// *** END OF INTERNAL FUNCTIONS ***
|
||
|
||
void DataFlash_APM1::PageErase (uint16_t PageAdr)
|
||
{
|
||
dataflash_CS_active(); // activate dataflash command decoder
|
||
SPI.transfer(DF_PAGE_ERASE); // Command
|
||
|
||
if(df_PageSize==512){
|
||
SPI.transfer((unsigned char)(PageAdr >> 7));
|
||
SPI.transfer((unsigned char)(PageAdr << 1));
|
||
}else{
|
||
SPI.transfer((unsigned char)(PageAdr >> 6));
|
||
SPI.transfer((unsigned char)(PageAdr << 2));
|
||
}
|
||
|
||
SPI.transfer(0x00); // "dont cares"
|
||
dataflash_CS_inactive(); //initiate flash page erase
|
||
dataflash_CS_active();
|
||
while(!ReadStatus());
|
||
|
||
dataflash_CS_inactive(); // deactivate dataflash command decoder
|
||
}
|
||
|
||
|
||
void DataFlash_APM1::ChipErase ()
|
||
{
|
||
|
||
dataflash_CS_active(); // activate dataflash command decoder
|
||
// opcodes for chip erase
|
||
SPI.transfer(DF_CHIP_ERASE_0);
|
||
SPI.transfer(DF_CHIP_ERASE_1);
|
||
SPI.transfer(DF_CHIP_ERASE_2);
|
||
SPI.transfer(DF_CHIP_ERASE_3);
|
||
|
||
dataflash_CS_inactive(); //initiate flash page erase
|
||
dataflash_CS_active();
|
||
while(!ReadStatus());
|
||
|
||
dataflash_CS_inactive(); // deactivate dataflash command decoder
|
||
}
|
||
|