ardupilot/libraries/AP_HAL_ChibiOS
Andrew Tridgell 5c823debc0 HAL_ChibiOS: support saving persistent parameters to bootloader sector
when we flash the bootloader we can save key peristent parameters to
the end of the bootloader sector, allowing them to persistent across
changes of firmware type

This allows for factory temperature calibration
2021-01-21 13:09:21 +11:00
..
hwdef HAL_ChibiOS: allow for some embedded parameters on AP_Periph builds 2021-01-21 06:19:46 +11:00
AnalogIn.cpp HAL_ChibiOS: fixed periph overpower ifdef 2020-10-13 17:58:30 +11:00
AnalogIn.h AP_HAL_ChibiOS: log accumulated power status flags; all flags ever set 2020-07-21 09:12:14 +10:00
AP_HAL_ChibiOS_Namespace.h AP_HAL_ChibiOS: create UAVCAN agnostic CANIface driver 2020-08-19 17:31:09 +10:00
AP_HAL_ChibiOS_Private.h AP_HAL_ChibiOS: hardware M4-Cortex and M7-Cortex (and H7) implementation of HAL FFT abstraction 2020-02-22 11:15:37 +11:00
AP_HAL_ChibiOS.h
bxcan.hpp AP_HAL_ChibiOS: create UAVCAN agnostic CANIface driver 2020-08-19 17:31:09 +10:00
CANFDIface.cpp HAL_ChibiOS: use ExpandingString for @SYS buffers 2021-01-05 10:52:00 +11:00
CANFDIface.h HAL_ChibiOS: use ExpandingString for @SYS buffers 2021-01-05 10:52:00 +11:00
CanIface.cpp HAL_ChibiOS: use ExpandingString for @SYS buffers 2021-01-05 10:52:00 +11:00
CANIface.h HAL_ChibiOS: use ExpandingString for @SYS buffers 2021-01-05 10:52:00 +11:00
Device.cpp HAL_ChibiOS: shorted thread names 2020-04-29 07:36:55 +10:00
Device.h HAL_ChibiOS: added checking on bouncebuffer allocation 2020-01-18 07:13:11 +11:00
DSP.cpp AP_HAL_ChibiOS: add harmonics to DSP 2020-05-24 07:43:34 +10:00
DSP.h AP_HAL_ChibiOS: add harmonics to DSP 2020-05-24 07:43:34 +10:00
EventSource.cpp HAL_ChibiOS: modify hal can drivers for use by AP_Periph 2020-09-24 12:32:19 +10:00
EventSource.h HAL_ChibiOS: modify hal can drivers for use by AP_Periph 2020-09-24 12:32:19 +10:00
Flash.h HAL_ChibiOS: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
GPIO.cpp HAL_ChibiOS: fixed remapping of ioline_t with BRD_ALT_CONFIG 2020-10-28 19:51:45 +11:00
GPIO.h HAL_ChibiOS: fixed remapping of ioline_t with BRD_ALT_CONFIG 2020-10-28 19:51:45 +11:00
HAL_ChibiOS_Class.cpp HAL_ChibiOS: support saving persistent parameters to bootloader sector 2021-01-21 13:09:21 +11:00
HAL_ChibiOS_Class.h AP_HAL_ChibiOS: create UAVCAN agnostic CANIface driver 2020-08-19 17:31:09 +10:00
I2CDevice.cpp HAL_ChibiOS: fixed remapping of ioline_t with BRD_ALT_CONFIG 2020-10-28 19:51:45 +11:00
I2CDevice.h AP_HAL_ChibiOS: remove unnecessary tabs and whitespaces 2019-10-21 08:01:56 +11:00
RCInput.cpp AP_HAL_ChibiOS: use GCS_SEND_TEXT() 2020-04-29 07:36:55 +10:00
RCInput.h HAL_ChibiOS: implement pulse_input_enable() 2020-01-31 11:09:07 +11:00
RCOutput_bdshot.cpp AP_HAL_ChibiOS: handle UP/CH channel sharing on H7 correctly 2021-01-20 18:15:17 +11:00
RCOutput.cpp AP_HAL_ChibiOS: ensure that serial LED setup goes via an intermediate buffer 2021-01-20 18:10:18 +11:00
RCOutput.h AP_HAL_ChibiOS: ensure that serial LED setup goes via an intermediate buffer 2021-01-20 18:10:18 +11:00
Scheduler.cpp AP_HAL_ChibiOS: rename system_initialized() and add is_system_initialized() 2020-12-30 18:16:59 +11:00
Scheduler.h AP_HAL_ChibiOS: adjust stack sizes 2021-01-10 08:28:55 +11:00
sdcard.cpp HAL_ChibiOS: go via AP_Filesystem for mount/unmount operations 2020-10-27 10:45:03 +11:00
sdcard.h AP_HAL_ChibiOS: remove unnecessary tabs and whitespaces 2019-10-21 08:01:56 +11:00
Semaphores.cpp AP_HAL_ChibiOS: make all semaphores recursive 2020-01-19 20:19:30 +11:00
Semaphores.h AP_HAL_ChibiOS: make all semaphores recursive 2020-01-19 20:19:30 +11:00
shared_dma.cpp HAL_ChibiOS: use ExpandingString for @SYS buffers 2021-01-05 10:52:00 +11:00
shared_dma.h HAL_ChibiOS: use ExpandingString for @SYS buffers 2021-01-05 10:52:00 +11:00
SoftSigReader.cpp HAL_ChibiOS: added disable() API for pulse input 2020-01-31 11:09:07 +11:00
SoftSigReader.h HAL_ChibiOS: fixed warning on gcc9 2020-09-22 08:07:23 +10:00
SoftSigReaderInt.cpp HAL_ChibiOS: added disable() API for pulse input 2020-01-31 11:09:07 +11:00
SoftSigReaderInt.h HAL_ChibiOS: added disable() API for pulse input 2020-01-31 11:09:07 +11:00
SPIDevice.cpp AP_HAL_ChibiOS: add support for bank selection call outside SPI driver 2020-08-06 12:41:35 +10:00
SPIDevice.h AP_HAL_ChibiOS: add support for bank selection call outside SPI driver 2020-08-06 12:41:35 +10:00
stdio.cpp HAL_ChibiOS: modify hal can drivers for use by AP_Periph 2020-09-24 12:32:19 +10:00
Storage.cpp HAL_ChibiOS: go via AP_Filesystem for mount/unmount operations 2020-10-27 10:45:03 +11:00
Storage.h HAL_ChibiOS: fixed race condition in storage write 2020-05-04 17:22:41 +10:00
system.cpp AP_HAL_ChibiOS: do not reuse va_list after it has been ended 2021-01-05 10:04:25 +11:00
UARTDriver.cpp AP_HAL_ChibiOS: adjust stack sizes 2021-01-10 08:28:55 +11:00
UARTDriver.h AP_HAL_ChibiOS: support uartI, allowing a total of 9 uarts 2020-11-30 14:09:31 +11:00
Util.cpp HAL_ChibiOS: support saving persistent parameters to bootloader sector 2021-01-21 13:09:21 +11:00
Util.h HAL_ChibiOS: support saving persistent parameters to bootloader sector 2021-01-21 13:09:21 +11:00