mirror of https://github.com/ArduPilot/ardupilot
329 lines
9.1 KiB
C++
329 lines
9.1 KiB
C++
/*
|
|
Generic RGBLed driver
|
|
*/
|
|
|
|
/*
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
*/
|
|
|
|
|
|
#include <AP_HAL/AP_HAL.h>
|
|
#include <AP_GPS/AP_GPS.h>
|
|
#include "RGBLed.h"
|
|
#include "AP_Notify.h"
|
|
|
|
extern const AP_HAL::HAL& hal;
|
|
|
|
RGBLed::RGBLed(uint8_t led_off, uint8_t led_bright, uint8_t led_medium, uint8_t led_dim):
|
|
counter(0),
|
|
step(0),
|
|
_healthy(false),
|
|
_red_des(0),
|
|
_green_des(0),
|
|
_blue_des(0),
|
|
_red_curr(0),
|
|
_green_curr(0),
|
|
_blue_curr(0),
|
|
_led_off(led_off),
|
|
_led_bright(led_bright),
|
|
_led_medium(led_medium),
|
|
_led_dim(led_dim)
|
|
{
|
|
|
|
}
|
|
|
|
bool RGBLed::init()
|
|
{
|
|
_healthy = hw_init();
|
|
return _healthy;
|
|
}
|
|
|
|
// set_rgb - set color as a combination of red, green and blue values
|
|
void RGBLed::set_rgb(uint8_t red, uint8_t green, uint8_t blue)
|
|
{
|
|
// return immediately if not enabled
|
|
if (!_healthy) {
|
|
return;
|
|
}
|
|
|
|
if (red != _red_curr ||
|
|
green != _green_curr ||
|
|
blue != _blue_curr) {
|
|
// call the hardware update routine
|
|
if (hw_set_rgb(red, green, blue)) {
|
|
_red_curr = red;
|
|
_green_curr = green;
|
|
_blue_curr = blue;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
// _scheduled_update - updates _red, _green, _blue according to notify flags
|
|
void RGBLed::update_colours(void)
|
|
{
|
|
uint8_t brightness = _led_bright;
|
|
|
|
switch (pNotify->_rgb_led_brightness) {
|
|
case RGB_LED_OFF:
|
|
brightness = _led_off;
|
|
break;
|
|
case RGB_LED_LOW:
|
|
brightness = _led_dim;
|
|
break;
|
|
case RGB_LED_MEDIUM:
|
|
brightness = _led_medium;
|
|
break;
|
|
case RGB_LED_HIGH:
|
|
brightness = _led_bright;
|
|
break;
|
|
}
|
|
|
|
// slow rate from 50Hz to 10hz
|
|
counter++;
|
|
if (counter < 5) {
|
|
return;
|
|
}
|
|
|
|
// reset counter
|
|
counter = 0;
|
|
|
|
// move forward one step
|
|
step++;
|
|
if (step >= 10) {
|
|
step = 0;
|
|
}
|
|
|
|
// use dim light when connected through USB
|
|
if (hal.gpio->usb_connected() && brightness > _led_dim) {
|
|
brightness = _led_dim;
|
|
}
|
|
|
|
// initialising pattern
|
|
if (AP_Notify::flags.initialising) {
|
|
if (step & 1) {
|
|
// odd steps display red light
|
|
_red_des = brightness;
|
|
_blue_des = _led_off;
|
|
_green_des = _led_off;
|
|
} else {
|
|
// even display blue light
|
|
_red_des = _led_off;
|
|
_blue_des = brightness;
|
|
_green_des = _led_off;
|
|
}
|
|
|
|
// exit so no other status modify this pattern
|
|
return;
|
|
}
|
|
|
|
// save trim and esc calibration pattern
|
|
if (AP_Notify::flags.save_trim || AP_Notify::flags.esc_calibration) {
|
|
switch(step) {
|
|
case 0:
|
|
case 3:
|
|
case 6:
|
|
// red on
|
|
_red_des = brightness;
|
|
_blue_des = _led_off;
|
|
_green_des = _led_off;
|
|
break;
|
|
|
|
case 1:
|
|
case 4:
|
|
case 7:
|
|
// blue on
|
|
_red_des = _led_off;
|
|
_blue_des = brightness;
|
|
_green_des = _led_off;
|
|
break;
|
|
|
|
case 2:
|
|
case 5:
|
|
case 8:
|
|
// green on
|
|
_red_des = _led_off;
|
|
_blue_des = _led_off;
|
|
_green_des = brightness;
|
|
break;
|
|
|
|
case 9:
|
|
// all off
|
|
_red_des = _led_off;
|
|
_blue_des = _led_off;
|
|
_green_des = _led_off;
|
|
break;
|
|
}
|
|
// exit so no other status modify this pattern
|
|
return;
|
|
}
|
|
|
|
// radio and battery failsafe patter: flash yellow
|
|
// gps failsafe pattern : flashing yellow and blue
|
|
// ekf_bad pattern : flashing yellow and red
|
|
if (AP_Notify::flags.failsafe_radio || AP_Notify::flags.failsafe_battery ||
|
|
AP_Notify::flags.ekf_bad) {
|
|
switch(step) {
|
|
case 0:
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
case 4:
|
|
// yellow on
|
|
_red_des = brightness;
|
|
_blue_des = _led_off;
|
|
_green_des = brightness;
|
|
break;
|
|
case 5:
|
|
case 6:
|
|
case 7:
|
|
case 8:
|
|
case 9:
|
|
if (AP_Notify::flags.ekf_bad) {
|
|
// red on if ekf bad
|
|
_red_des = brightness;
|
|
_blue_des = _led_off;
|
|
_green_des = _led_off;
|
|
}else{
|
|
// all off for radio or battery failsafe
|
|
_red_des = _led_off;
|
|
_blue_des = _led_off;
|
|
_green_des = _led_off;
|
|
}
|
|
break;
|
|
}
|
|
// exit so no other status modify this pattern
|
|
return;
|
|
}
|
|
|
|
// solid green or blue if armed
|
|
if (AP_Notify::flags.armed) {
|
|
// solid green if armed with GPS 3d lock
|
|
if (AP_Notify::flags.gps_status >= AP_GPS::GPS_OK_FIX_3D) {
|
|
_red_des = _led_off;
|
|
_blue_des = _led_off;
|
|
_green_des = brightness;
|
|
}else{
|
|
// solid blue if armed with no GPS lock
|
|
_red_des = _led_off;
|
|
_blue_des = brightness;
|
|
_green_des = _led_off;
|
|
}
|
|
return;
|
|
}else{
|
|
// double flash yellow if failing pre-arm checks
|
|
if (!AP_Notify::flags.pre_arm_check) {
|
|
switch(step) {
|
|
case 0:
|
|
case 1:
|
|
case 4:
|
|
case 5:
|
|
// yellow on
|
|
_red_des = brightness;
|
|
_blue_des = _led_off;
|
|
_green_des = brightness;
|
|
break;
|
|
case 2:
|
|
case 3:
|
|
case 6:
|
|
case 7:
|
|
case 8:
|
|
case 9:
|
|
// all off
|
|
_red_des = _led_off;
|
|
_blue_des = _led_off;
|
|
_green_des = _led_off;
|
|
break;
|
|
}
|
|
}else{
|
|
// fast flashing green if disarmed with GPS 3D lock and DGPS
|
|
// slow flashing green if disarmed with GPS 3d lock (and no DGPS)
|
|
// flashing blue if disarmed with no gps lock or gps pre_arm checks have failed
|
|
bool fast_green = AP_Notify::flags.gps_status >= AP_GPS::GPS_OK_FIX_3D_DGPS && AP_Notify::flags.pre_arm_gps_check;
|
|
switch(step) {
|
|
case 0:
|
|
if (fast_green) {
|
|
_green_des = brightness;
|
|
}
|
|
break;
|
|
case 1:
|
|
if (fast_green) {
|
|
_green_des = _led_off;
|
|
}
|
|
break;
|
|
case 2:
|
|
if (fast_green) {
|
|
_green_des = brightness;
|
|
}
|
|
break;
|
|
case 3:
|
|
if (fast_green) {
|
|
_green_des = _led_off;
|
|
}
|
|
break;
|
|
case 4:
|
|
_red_des = _led_off;
|
|
if (AP_Notify::flags.gps_status >= AP_GPS::GPS_OK_FIX_3D && AP_Notify::flags.pre_arm_gps_check) {
|
|
// flashing green if disarmed with GPS 3d lock
|
|
_blue_des = _led_off;
|
|
_green_des = brightness;
|
|
}else{
|
|
// flashing blue if disarmed with no gps lock
|
|
_blue_des = brightness;
|
|
_green_des = _led_off;
|
|
}
|
|
break;
|
|
case 5:
|
|
if (fast_green) {
|
|
_green_des = _led_off;
|
|
}
|
|
break;
|
|
|
|
case 6:
|
|
if (fast_green) {
|
|
_green_des = brightness;
|
|
}
|
|
break;
|
|
|
|
case 7:
|
|
if (fast_green) {
|
|
_green_des = _led_off;
|
|
}
|
|
break;
|
|
case 8:
|
|
if (fast_green) {
|
|
_green_des = brightness;
|
|
}
|
|
break;
|
|
case 9:
|
|
// all off
|
|
_red_des = _led_off;
|
|
_blue_des = _led_off;
|
|
_green_des = _led_off;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
// update - updates led according to timed_updated. Should be called
|
|
// at 50Hz
|
|
void RGBLed::update()
|
|
{
|
|
// return immediately if not enabled
|
|
if (!_healthy) {
|
|
return;
|
|
}
|
|
update_colours();
|
|
set_rgb(_red_des, _green_des, _blue_des);
|
|
}
|