mirror of https://github.com/ArduPilot/ardupilot
122 lines
3.3 KiB
CMake
122 lines
3.3 KiB
CMake
# options
|
|
apm_option("APM_PROGRAMMING_PORT" TYPE STRING
|
|
DESCRIPTION "Programming upload port?"
|
|
DEFAULT "/dev/ttyUSB0")
|
|
|
|
apm_option("APM_BOARD" TYPE STRING
|
|
DESCRIPTION "ArduPilotMega board?"
|
|
DEFAULT "mega2560"
|
|
OPTIONS "mega" "mega2560")
|
|
|
|
apm_option("APM_FRAME" TYPE STRING
|
|
DESCRIPTION "Vehicle type?"
|
|
DEFAULT "PLANE_FRAME"
|
|
OPTIONS
|
|
"PLANE FRAME"
|
|
"HELI_FRAME"
|
|
"HEXA_FRAME"
|
|
"OCTA_FRAME"
|
|
"Y6_FRAME"
|
|
)
|
|
|
|
apm_option("GPS_PROTOCOL" TYPE STRING
|
|
DESCRIPTION "GPS protocol?"
|
|
DEFAULT "GPS_PROTOCOL_AUTO"
|
|
OPTIONS
|
|
"GPS_PROTOOCL_NONE"
|
|
"GPS_PROTOCOL_AUTO"
|
|
"GPS_PROTOCOL_NONE"
|
|
"GPS_PROTOCOL_IMU"
|
|
"GPS_PROTOCOL_MTK"
|
|
"GPS_PROTOCOL_MTK16"
|
|
"GPS_PROTOCOL_UBLOX"
|
|
"GPS_PROTOCOL_SIRF"
|
|
"GPS_PROTOCOL_NMEA")
|
|
|
|
apm_option("AIRSPEED_SENSOR" TYPE BOOL
|
|
DESCRIPTION "Enable airspeed sensor?"
|
|
DEFAULT OFF)
|
|
|
|
apm_option("AIRSPEED_RATIO" TYPE STRING ADVANCED
|
|
DESCRIPTION "Airspeed ratio?"
|
|
DEFAULT "1.9936")
|
|
|
|
apm_option("MAGNETOMETER" TYPE BOOL
|
|
DESCRIPTION "Enable airspeed sensor?"
|
|
DEFAULT OFF)
|
|
|
|
apm_option("MAG_ORIENTATION" TYPE STRING ADVANCED
|
|
DESCRIPTION "Magnetometer orientation?"
|
|
DEFAULT "AP_COMPASS_COMPONENTS_DOWN_PINS_FORWARD"
|
|
OPTIONS
|
|
"AP_COMPASS_COMPONENTS_DOWN_PINS_FORWARD"
|
|
"AP_COMPASS_COMPONENTS_DOWN_PINS_BACK"
|
|
"AP_COMPASS_COMPONENTS_UP_PINS_FORWARD"
|
|
"AP_COMPASS_COMPONENTS_UP_PINS_BACK")
|
|
|
|
apm_option("HIL_MODE" TYPE STRING
|
|
DESCRIPTION "Hardware-in-the-loop- mode?"
|
|
DEFAULT "HIL_MODE_DISABLED"
|
|
OPTIONS
|
|
"HIL_MODE_DISABLED"
|
|
"HIL_MODE_ATTITUDE"
|
|
"HIL_MODE_SENSORS")
|
|
|
|
apm_option("HIL_PORT" TYPE STRING
|
|
DESCRIPTION "Port for Hardware-in-the-loop communication"
|
|
DEFAULT "0"
|
|
OPTIONS "0" "1" "2" "3")
|
|
|
|
apm_option("HIL_PROTOCOL" TYPE STRING
|
|
DESCRIPTION "Hardware-in-the-loop protocol?"
|
|
DEFAULT "HIL_PROTOCOL_MAVLINK"
|
|
OPTIONS "HIL_PROTOCOL_MAVLINK" "HIL_PROTOCOL_XPLANE")
|
|
|
|
apm_option("GPS_PROTOCOL" TYPE STRING
|
|
DESCRIPTION "Ground station protocol?"
|
|
DEFAULT "GCS_PROTOCOL_MAVLINK"
|
|
OPTIONS "GCS_PROTOCOL_NONE" "GCS_PROTOCOL_MAVLINK")
|
|
|
|
apm_option("GCS_PORT" TYPE STRING ADVANCED
|
|
DESCRIPTION "Ground station port?"
|
|
DESCRIPTION "3"
|
|
OPTIONS "0" "1" "2" "3")
|
|
|
|
apm_option("MAV_SYSTEM_ID" TYPE STRING ADVANCED
|
|
DESCRIPTION "MAVLink System ID?"
|
|
DESCRIPTION "1")
|
|
|
|
apm_option("SERIAL0_BAUD" TYPE STRING ADVANCED
|
|
DESCRIPTION "Serial 0 baudrate?"
|
|
DEFAULT "115200"
|
|
OPTIONS "57600" "115200")
|
|
|
|
apm_option("SERIAL3_BAUD" TYPE STRING ADVANCED
|
|
DESCRIPTION "Serial 3 baudrate?"
|
|
DEFAULT "57600"
|
|
OPTIONS "57600" "115200")
|
|
|
|
apm_option("BATTERY_EVENT" TYPE BOOL ADVANCED
|
|
DESCRIPTION "Enable low voltage/ high discharge warnings?"
|
|
DEFAULT OFF)
|
|
|
|
apm_option("LOW_VOLTAGE" TYPE STRING ADVANCED
|
|
DESCRIPTION "Voltage to consider low (volts)?"
|
|
DEFAULT "9.6")
|
|
|
|
apm_option("VOLT_DIV_RATIO" TYPE STRING ADVANCED
|
|
DESCRIPTION "Voltage division ratio?"
|
|
DEFAULT "3.56")
|
|
|
|
apm_option("CUR_AMPS_PER_VOLT" TYPE STRING ADVANCED
|
|
DESCRIPTION "Current amps/volt?"
|
|
DEFAULT "27.32")
|
|
|
|
apm_option("CUR_AMPS_OFFSET" TYPE STRING ADVANCED
|
|
DESCRIPTION "Current amps offset?"
|
|
DEFAULT "0.0")
|
|
|
|
apm_option("CUR_AMPS_OFFSET" TYPE STRING ADVANCED
|
|
DESCRIPTION "Current amps offset?"
|
|
DEFAULT "0.0")
|