ardupilot/libraries/SITL/examples/Morse/quad_scanner.py

91 lines
2.4 KiB
Python

'''
This is an example builder script that sets up a quadcopter in Morse to
be driven by ArduPilot.
The quadcopter has the basic set of sensors that ArduPilot needs
To start the simulation use this:
morse run quad_scanner.py
Then connect with ArduPilot like this:
sim_vehicle.py --model morse --console --map
This model assumes an X frame quadcopter, so you will need:
FRAME_CLASS 1
FRAME_TYPE 1
'''
from morse.builder import *
# use the ATRV rover
vehicle = Quadrotor()
vehicle.properties(Object = True, Graspable = False, Label = "Vehicle")
vehicle.translate(x=0.0, z=1.0)
# add a camera
camera = SemanticCamera(name="Camera")
camera.translate(x=0.2, y=0.3, z=0.9)
vehicle.append(camera)
camera.properties(cam_far=800)
camera.properties(Vertical_Flip=True)
# we could optionally stream the video to a port
#camera.add_stream('socket')
# add sensors needed for ArduPilot operation to a vehicle
pose = Pose()
vehicle.append(pose)
imu = IMU()
vehicle.append(imu)
gps = GPS()
gps.alter('UTM')
vehicle.append(gps)
velocity = Velocity()
vehicle.append(velocity)
# add a 360 degree laser scanner, sitting 1m above the quadcopter
scan = Hokuyo()
scan.translate(x=0.0, z=1)
vehicle.append(scan)
scan.properties(Visible_arc = True)
scan.properties(laser_range = 18.0)
scan.properties(resolution = 5.0)
scan.properties(scan_window = 360.0)
scan.create_laser_arc()
# create a compound sensor of all of the individual sensors and stream it
all_sensors = CompoundSensor([imu, gps, velocity, pose,scan])
all_sensors.add_stream('socket')
vehicle.append(all_sensors)
# make the vehicle controllable via force and torque
# this will be available on port 4000 by default
engines = QuadrotorDynamicControl()
vehicle.append(engines)
engines.add_stream('socket')
# this would allow us to control the vehicle with a keyboard
# we don't enable it as it causes issues with sensor consistency
#keyboard = Keyboard()
#keyboard.properties(Speed=3.0)
#vehicle.append(keyboard)
# Environment. Run in fast mode which gives wire-frame view, but lowers
# CPU load a lot
env = Environment('land-1/trees', fastmode=False)
env.set_camera_location([10.0, -10.0, 10.0])
env.set_camera_rotation([1.0470, 0, 0.7854])
env.select_display_camera(camera)
env.set_camera_clip(clip_end=1000)
# startup at CMAC. A location is needed for the magnetometer
env.properties(longitude = 149.165230, latitude = -35.363261, altitude = 584.0)