ardupilot/APMrover2/mode_loiter.cpp

62 lines
2.3 KiB
C++

#include "mode.h"
#include "Rover.h"
bool ModeLoiter::_enter()
{
// set _destination to reasonable stopping point
calc_stopping_location(_destination);
// initialise desired speed to current speed
if (!attitude_control.get_forward_speed(_desired_speed)) {
_desired_speed = 0.0f;
}
// initialise heading to current heading
_desired_yaw_cd = ahrs.yaw_sensor;
return true;
}
void ModeLoiter::update()
{
// get distance (in meters) to destination
_distance_to_destination = rover.current_loc.get_distance(_destination);
// if within loiter radius slew desired speed towards zero and use existing desired heading
if (_distance_to_destination <= g2.loit_radius) {
// sailboats do not stop
const float desired_speed_within_radius = rover.g2.sailboat.enabled() ? 0.1f : 0.0f;
_desired_speed = attitude_control.get_desired_speed_accel_limited(desired_speed_within_radius, rover.G_Dt);
} else {
// P controller with hard-coded gain to convert distance to desired speed
// To-Do: make gain configurable or calculate from attitude controller's maximum accelearation
_desired_speed = MIN((_distance_to_destination - g2.loit_radius) * 0.5f, g2.wp_nav.get_default_speed());
// calculate bearing to destination
_desired_yaw_cd = rover.current_loc.get_bearing_to(_destination);
float yaw_error_cd = wrap_180_cd(_desired_yaw_cd - ahrs.yaw_sensor);
// if destination is behind vehicle, reverse towards it
if (fabsf(yaw_error_cd) > 9000 && g2.loit_type == 0) {
_desired_yaw_cd = wrap_180_cd(_desired_yaw_cd + 18000);
yaw_error_cd = wrap_180_cd(_desired_yaw_cd - ahrs.yaw_sensor);
_desired_speed = -_desired_speed;
}
// reduce desired speed if yaw_error is large
// 45deg of error reduces speed to 75%, 90deg of error reduces speed to 50%
float yaw_error_ratio = 1.0f - constrain_float(fabsf(yaw_error_cd / 9000.0f), 0.0f, 1.0f) * 0.5f;
_desired_speed *= yaw_error_ratio;
}
// run steering and throttle controllers
calc_steering_to_heading(_desired_yaw_cd);
calc_throttle(_desired_speed, true);
}
// get desired location
bool ModeLoiter::get_desired_location(Location& destination) const
{
destination = _destination;
return true;
}