mirror of https://github.com/ArduPilot/ardupilot
166 lines
8.3 KiB
C++
166 lines
8.3 KiB
C++
/// @file AP_MotorsHeli_Single.h
|
|
/// @brief Motor control class for traditional heli
|
|
#pragma once
|
|
|
|
#include <AP_Common/AP_Common.h>
|
|
#include <AP_Math/AP_Math.h> // ArduPilot Mega Vector/Matrix math Library
|
|
#include <SRV_Channel/SRV_Channel.h>
|
|
#include "AP_MotorsHeli.h"
|
|
#include "AP_MotorsHeli_RSC.h"
|
|
|
|
// rsc and extgyro function output channels.
|
|
#define AP_MOTORS_HELI_SINGLE_RSC CH_8
|
|
#define AP_MOTORS_HELI_SINGLE_EXTGYRO CH_7
|
|
#define AP_MOTORS_HELI_SINGLE_TAILRSC CH_7
|
|
|
|
// servo position defaults
|
|
#define AP_MOTORS_HELI_SINGLE_SERVO1_POS -60
|
|
#define AP_MOTORS_HELI_SINGLE_SERVO2_POS 60
|
|
#define AP_MOTORS_HELI_SINGLE_SERVO3_POS 180
|
|
|
|
// swash type definitions
|
|
#define AP_MOTORS_HELI_SINGLE_SWASH_H3 0
|
|
#define AP_MOTORS_HELI_SINGLE_SWASH_H1 1
|
|
#define AP_MOTORS_HELI_SINGLE_SWASH_H3_140 2
|
|
|
|
// collective control direction definitions
|
|
#define AP_MOTORS_HELI_SINGLE_COLLECTIVE_DIRECTION_NORMAL 0
|
|
#define AP_MOTORS_HELI_SINGLE_COLLECTIVE_DIRECTION_REVERSED 1
|
|
|
|
// tail types
|
|
#define AP_MOTORS_HELI_SINGLE_TAILTYPE_SERVO 0
|
|
#define AP_MOTORS_HELI_SINGLE_TAILTYPE_SERVO_EXTGYRO 1
|
|
#define AP_MOTORS_HELI_SINGLE_TAILTYPE_DIRECTDRIVE_VARPITCH 2
|
|
#define AP_MOTORS_HELI_SINGLE_TAILTYPE_DIRECTDRIVE_FIXEDPITCH 3
|
|
|
|
// direct-drive variable pitch defaults
|
|
#define AP_MOTORS_HELI_SINGLE_DDVP_SPEED_DEFAULT 500
|
|
|
|
// default external gyro gain
|
|
#define AP_MOTORS_HELI_SINGLE_EXT_GYRO_GAIN 350
|
|
|
|
// COLYAW parameter min and max values
|
|
#define AP_MOTORS_HELI_SINGLE_COLYAW_RANGE 10.0f
|
|
|
|
// maximum number of swashplate servos
|
|
#define AP_MOTORS_HELI_SINGLE_NUM_SWASHPLATE_SERVOS 3
|
|
|
|
/// @class AP_MotorsHeli_Single
|
|
class AP_MotorsHeli_Single : public AP_MotorsHeli {
|
|
public:
|
|
// constructor
|
|
AP_MotorsHeli_Single(uint16_t loop_rate,
|
|
uint16_t speed_hz = AP_MOTORS_HELI_SPEED_DEFAULT) :
|
|
AP_MotorsHeli(loop_rate, speed_hz),
|
|
_main_rotor(SRV_Channel::k_heli_rsc, AP_MOTORS_HELI_SINGLE_RSC),
|
|
_tail_rotor(SRV_Channel::k_heli_tail_rsc, AP_MOTORS_HELI_SINGLE_TAILRSC)
|
|
{
|
|
AP_Param::setup_object_defaults(this, var_info);
|
|
};
|
|
|
|
// set update rate to motors - a value in hertz
|
|
void set_update_rate(uint16_t speed_hz) override;
|
|
|
|
// output_test_seq - spin a motor at the pwm value specified
|
|
// motor_seq is the motor's sequence number from 1 to the number of motors on the frame
|
|
// pwm value is an actual pwm value that will be output, normally in the range of 1000 ~ 2000
|
|
virtual void output_test_seq(uint8_t motor_seq, int16_t pwm) override;
|
|
|
|
// output_to_motors - sends values out to the motors
|
|
void output_to_motors() override;
|
|
|
|
// set_desired_rotor_speed - sets target rotor speed as a number from 0 ~ 1
|
|
void set_desired_rotor_speed(float desired_speed) override;
|
|
|
|
// get_main_rotor_speed - gets estimated or measured main rotor speed
|
|
float get_main_rotor_speed() const override { return _main_rotor.get_rotor_speed(); }
|
|
|
|
// get_desired_rotor_speed - gets target rotor speed as a number from 0 ~ 1
|
|
float get_desired_rotor_speed() const override { return _main_rotor.get_desired_speed(); }
|
|
|
|
// rotor_speed_above_critical - return true if rotor speed is above that critical for flight
|
|
bool rotor_speed_above_critical() const override { return _main_rotor.get_rotor_speed() > _main_rotor.get_critical_speed(); }
|
|
|
|
// calculate_scalars - recalculates various scalars used
|
|
void calculate_scalars() override;
|
|
|
|
// calculate_armed_scalars - recalculates scalars that can change while armed
|
|
void calculate_armed_scalars() override;
|
|
|
|
// get_motor_mask - returns a bitmask of which outputs are being used for motors or servos (1 means being used)
|
|
// this can be used to ensure other pwm outputs (i.e. for servos) do not conflict
|
|
uint16_t get_motor_mask() override;
|
|
|
|
// ext_gyro_gain - set external gyro gain in range 0 ~ 1
|
|
void ext_gyro_gain(float gain) override { _ext_gyro_gain_std = gain * 1000.0f; }
|
|
|
|
// has_flybar - returns true if we have a mechical flybar
|
|
bool has_flybar() const override { return _flybar_mode; }
|
|
|
|
// supports_yaw_passthrought - returns true if we support yaw passthrough
|
|
bool supports_yaw_passthrough() const override { return _tail_type == AP_MOTORS_HELI_SINGLE_TAILTYPE_SERVO_EXTGYRO; }
|
|
|
|
void set_acro_tail(bool set) override { _acro_tail = set; }
|
|
|
|
// parameter_check - returns true if helicopter specific parameters are sensible, used for pre-arm check
|
|
bool parameter_check(bool display_msg) const override;
|
|
|
|
// var_info
|
|
static const struct AP_Param::GroupInfo var_info[];
|
|
|
|
protected:
|
|
|
|
// init_outputs - initialise Servo/PWM ranges and endpoints
|
|
bool init_outputs() override;
|
|
|
|
// update_motor_controls - sends commands to motor controllers
|
|
void update_motor_control(RotorControlState state) override;
|
|
|
|
// calculate_roll_pitch_collective_factors - calculate factors based on swash type and servo position
|
|
void calculate_roll_pitch_collective_factors() override;
|
|
|
|
// heli_move_actuators - moves swash plate and tail rotor
|
|
void move_actuators(float roll_out, float pitch_out, float coll_in, float yaw_out) override;
|
|
|
|
// move_yaw - moves the yaw servo
|
|
void move_yaw(float yaw_out);
|
|
|
|
// servo_test - move servos through full range of movement
|
|
void servo_test() override;
|
|
|
|
// external objects we depend upon
|
|
AP_MotorsHeli_RSC _main_rotor; // main rotor
|
|
AP_MotorsHeli_RSC _tail_rotor; // tail rotor
|
|
|
|
// internal variables
|
|
float _oscillate_angle = 0.0f; // cyclic oscillation angle, used by servo_test function
|
|
float _servo_test_cycle_time = 0.0f; // cycle time tracker, used by servo_test function
|
|
float _collective_test = 0.0f; // over-ride for collective output, used by servo_test function
|
|
float _roll_test = 0.0f; // over-ride for roll output, used by servo_test function
|
|
float _pitch_test = 0.0f; // over-ride for pitch output, used by servo_test function
|
|
float _yaw_test = 0.0f; // over-ride for yaw output, used by servo_test function
|
|
float _servo1_out = 0.0f; // output value sent to motor
|
|
float _servo2_out = 0.0f; // output value sent to motor
|
|
float _servo3_out = 0.0f; // output value sent to motor
|
|
float _servo4_out = 0.0f; // output value sent to motor
|
|
|
|
// parameters
|
|
AP_Int16 _servo1_pos; // Angular location of swash servo #1
|
|
AP_Int16 _servo2_pos; // Angular location of swash servo #2
|
|
AP_Int16 _servo3_pos; // Angular location of swash servo #3
|
|
AP_Int8 _collective_direction; // Collective control direction, normal or reversed
|
|
AP_Int16 _tail_type; // Tail type used: Servo, Servo with external gyro, direct drive variable pitch or direct drive fixed pitch
|
|
AP_Int8 _swash_type; // Swash Type Setting
|
|
AP_Int16 _ext_gyro_gain_std; // PWM sent to external gyro on ch7 when tail type is Servo w/ ExtGyro
|
|
AP_Int16 _ext_gyro_gain_acro; // PWM sent to external gyro on ch7 when tail type is Servo w/ ExtGyro in ACRO
|
|
AP_Int16 _phase_angle; // Phase angle correction for rotor head. If pitching the swash forward induces a roll, this can be correct the problem
|
|
AP_Float _collective_yaw_effect; // Feed-forward compensation to automatically add rudder input when collective pitch is increased. Can be positive or negative depending on mechanics.
|
|
AP_Int8 _flybar_mode; // Flybar present or not. Affects attitude controller used during ACRO flight mode
|
|
AP_Int16 _direct_drive_tailspeed; // Direct Drive VarPitch Tail ESC speed (0 ~ 1000)
|
|
|
|
bool _acro_tail = false;
|
|
float _rollFactor[AP_MOTORS_HELI_SINGLE_NUM_SWASHPLATE_SERVOS];
|
|
float _pitchFactor[AP_MOTORS_HELI_SINGLE_NUM_SWASHPLATE_SERVOS];
|
|
float _collectiveFactor[AP_MOTORS_HELI_SINGLE_NUM_SWASHPLATE_SERVOS];
|
|
};
|