mirror of https://github.com/ArduPilot/ardupilot
45 lines
1.1 KiB
Bash
Executable File
45 lines
1.1 KiB
Bash
Executable File
#!/bin/bash
|
|
# this script sets up SITL to be able to attach to real CAN devices
|
|
# once run, you can configure SITL for CAN just like a real board, with the CAN parameters
|
|
#
|
|
# CAN_P1_DRIVER=1
|
|
# CAN_D1_PROTOCOL=1
|
|
|
|
# once running you can also attach uavcan_gui_tool to vcan0 to monitor the CAN bus
|
|
|
|
[ $# -eq 1 ] || {
|
|
echo "Usage: can_sitl.sh DEVICE"
|
|
echo "for example can_sitl.sh /dev/serial/by-id/usb-Zubax_Robotics_Zubax_Babel_3700330018514D563935392000000000-if00"
|
|
exit 1
|
|
}
|
|
|
|
DEVPATH="$1"
|
|
|
|
if readlink $DEVPATH > /dev/null; then
|
|
DEVNAME=$(basename $(readlink $DEVPATH))
|
|
else
|
|
DEVNAME=$(basename $DEVPATH)
|
|
fi
|
|
|
|
set -e
|
|
|
|
# cleanup from a previous run
|
|
sudo killall -9 slcand 2> /dev/null || true
|
|
for m in slcan can-gw vcan can_raw can; do
|
|
sudo rmmod $m 2> /dev/null || true
|
|
done
|
|
|
|
sudo modprobe vcan
|
|
sudo ip link add dev vcan0 type vcan
|
|
sudo ip link set up vcan0
|
|
sudo modprobe slcan
|
|
sudo modprobe can-gw
|
|
sudo slcan_attach -f -s8 -o "$DEVPATH"
|
|
sudo slcand "$DEVNAME" slcan0
|
|
sudo ifconfig slcan0 up
|
|
sudo cangw -A -s vcan0 -d slcan0 -e
|
|
sudo cangw -A -s slcan0 -d vcan0 -e
|
|
|
|
echo "slcan0 setup"
|
|
ifconfig slcan0
|