ardupilot/ArduSub/sensors.cpp

118 lines
3.4 KiB
C++

#include "Sub.h"
// return barometric altitude in centimeters
void Sub::read_barometer()
{
barometer.update();
// If we are reading a positive altitude, the sensor needs calibration
// Even a few meters above the water we should have no significant depth reading
if(!motors.armed() && barometer.get_altitude() > 0) {
barometer.update_calibration();
}
if (ap.depth_sensor_present) {
sensor_health.depth = barometer.healthy(depth_sensor_idx);
}
}
void Sub::init_rangefinder()
{
#if RANGEFINDER_ENABLED == ENABLED
rangefinder.init(ROTATION_PITCH_270);
rangefinder_state.alt_cm_filt.set_cutoff_frequency(RANGEFINDER_WPNAV_FILT_HZ);
rangefinder_state.enabled = rangefinder.has_orientation(ROTATION_PITCH_270);
#endif
}
// return rangefinder altitude in centimeters
void Sub::read_rangefinder()
{
#if RANGEFINDER_ENABLED == ENABLED
rangefinder.update();
rangefinder_state.alt_healthy = ((rangefinder.status_orient(ROTATION_PITCH_270) == RangeFinder::Status::Good) && (rangefinder.range_valid_count_orient(ROTATION_PITCH_270) >= RANGEFINDER_HEALTH_MAX));
int16_t temp_alt = rangefinder.distance_cm_orient(ROTATION_PITCH_270);
#if RANGEFINDER_TILT_CORRECTION == ENABLED
// correct alt for angle of the rangefinder
temp_alt = (float)temp_alt * MAX(0.707f, ahrs.get_rotation_body_to_ned().c.z);
#endif
rangefinder_state.alt_cm = temp_alt;
// filter rangefinder for use by AC_WPNav
uint32_t now = AP_HAL::millis();
if (rangefinder_state.alt_healthy) {
if (now - rangefinder_state.last_healthy_ms > RANGEFINDER_TIMEOUT_MS) {
// reset filter if we haven't used it within the last second
rangefinder_state.alt_cm_filt.reset(rangefinder_state.alt_cm);
} else {
rangefinder_state.alt_cm_filt.apply(rangefinder_state.alt_cm, 0.05f);
}
rangefinder_state.last_healthy_ms = now;
}
// send rangefinder altitude and health to waypoint navigation library
wp_nav.set_rangefinder_alt(rangefinder_state.enabled, rangefinder_state.alt_healthy, rangefinder_state.alt_cm_filt.get());
circle_nav.set_rangefinder_alt(rangefinder_state.enabled && wp_nav.rangefinder_used(), rangefinder_state.alt_healthy, rangefinder_state.alt_cm_filt.get());
#else
rangefinder_state.enabled = false;
rangefinder_state.alt_healthy = false;
rangefinder_state.alt_cm = 0;
#endif
}
// return true if rangefinder_alt can be used
bool Sub::rangefinder_alt_ok()
{
return (rangefinder_state.enabled && rangefinder_state.alt_healthy);
}
/*
update RPM sensors
*/
#if RPM_ENABLED == ENABLED
void Sub::rpm_update(void)
{
rpm_sensor.update();
if (rpm_sensor.enabled(0) || rpm_sensor.enabled(1)) {
if (should_log(MASK_LOG_RCIN)) {
logger.Write_RPM(rpm_sensor);
}
}
}
#endif
// initialise optical flow sensor
#if OPTFLOW == ENABLED
void Sub::init_optflow()
{
// initialise optical flow sensor
optflow.init(MASK_LOG_OPTFLOW);
}
#endif // OPTFLOW == ENABLED
void Sub::accel_cal_update()
{
if (hal.util->get_soft_armed()) {
return;
}
ins.acal_update();
// check if new trim values, and set them
float trim_roll, trim_pitch;
if (ins.get_new_trim(trim_roll, trim_pitch)) {
ahrs.set_trim(Vector3f(trim_roll, trim_pitch, 0));
}
}
/*
ask airspeed sensor for a new value, duplicated from plane
*/
void Sub::read_airspeed()
{
g2.airspeed.update(should_log(MASK_LOG_IMU));
}