ardupilot/libraries/AP_Notify/AP_Notify.h
Andrew Tridgell 495c4bbbbe AP_Notify: simplify interface to avoid timers and external calls
this changes AP_Notify to use updates via notify.update() at 50Hz,
avoiding the need for the 1kHz timer. It also creates a parent class
for ToshibaLED so that the I2C and PX4 ToshibaLED drivers can be
abstracted out.

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2013-08-30 13:01:35 +10:00

61 lines
2.1 KiB
C++

/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __AP_NOTIFY_H__
#define __AP_NOTIFY_H__
#include <AP_Common.h>
#include <AP_BoardLED.h>
#include <ToshibaLED.h>
#include <ToshibaLED_I2C.h>
#include <ToshibaLED_PX4.h>
class AP_Notify
{
public:
/// notify_type - bitmask of notification types
struct notify_type {
uint16_t initialising : 1; // 1 if initialising and copter should not be moved
uint16_t gps_status : 2; // 0 = no gps, 1 = no lock, 2 = 2d lock, 3 = 3d lock
uint16_t armed : 1; // 0 = disarmed, 1 = armed
uint16_t pre_arm_check : 1; // 0 = failing checks, 1 = passed
uint16_t save_trim : 1; // 1 if gathering trim data
uint16_t esc_calibration: 1; // 1 if calibrating escs
};
// the notify flags are static to allow direct class access
// without declaring the object
static struct notify_type flags;
// initialisation
void init(void);
/// update - allow updates of leds that cannot be updated during a timed interrupt
void update(void);
private:
// individual drivers
AP_BoardLED boardled;
#if CONFIG_HAL_BOARD == HAL_BOARD_APM1 || CONFIG_HAL_BOARD == HAL_BOARD_APM2
ToshibaLED_I2C toshibaled;
#elif CONFIG_HAL_BOARD == HAL_BOARD_PX4
ToshibaLED_PX4 toshibaled;
#endif
};
#endif // __AP_NOTIFY_H__