ardupilot/ArduSub/commands.cpp

138 lines
4.0 KiB
C++

#include "Sub.h"
// checks if we should update ahrs/RTL home position from the EKF
void Sub::update_home_from_EKF()
{
// exit immediately if home already set
if (ahrs.home_is_set()) {
return;
}
// special logic if home is set in-flight
if (motors.armed()) {
set_home_to_current_location_inflight();
} else {
// move home to current ekf location (this will set home_state to HOME_SET)
set_home_to_current_location(false);
}
}
// set_home_to_current_location_inflight - set home to current GPS location (horizontally) and EKF origin vertically
void Sub::set_home_to_current_location_inflight()
{
// get current location from EKF
Location temp_loc;
if (inertial_nav.get_location(temp_loc)) {
const struct Location &ekf_origin = inertial_nav.get_origin();
temp_loc.alt = ekf_origin.alt;
set_home(temp_loc, false);
}
}
// set_home_to_current_location - set home to current GPS location
bool Sub::set_home_to_current_location(bool lock)
{
// get current location from EKF
Location temp_loc;
if (inertial_nav.get_location(temp_loc)) {
// Make home always at the water's surface.
// This allows disarming and arming again at depth.
// This also ensures that mission items with relative altitude frame, are always
// relative to the water's surface, whether in a high elevation lake, or at sea level.
temp_loc.alt -= barometer.get_altitude() * 100.0f;
return set_home(temp_loc, lock);
}
return false;
}
// set_home - sets ahrs home (used for RTL) to specified location
// initialises inertial nav and compass on first call
// returns true if home location set successfully
bool Sub::set_home(const Location& loc, bool lock)
{
// check location is valid
if (loc.lat == 0 && loc.lng == 0) {
return false;
}
// check if EKF origin has been set
Location ekf_origin;
if (!ahrs.get_origin(ekf_origin)) {
return false;
}
const bool home_was_set = ahrs.home_is_set();
// set ahrs home (used for RTL)
ahrs.set_home(loc);
// init inav and compass declination
if (!home_was_set) {
// update navigation scalers. used to offset the shrinking longitude as we go towards the poles
scaleLongDown = longitude_scale(loc);
// record home is set
Log_Write_Event(DATA_SET_HOME);
// log new home position which mission library will pull from ahrs
if (should_log(MASK_LOG_CMD)) {
AP_Mission::Mission_Command temp_cmd;
if (mission.read_cmd_from_storage(0, temp_cmd)) {
DataFlash.Log_Write_Mission_Cmd(mission, temp_cmd);
}
}
}
// lock home position
if (lock) {
ahrs.lock_home();
}
// log ahrs home and ekf origin dataflash
ahrs.Log_Write_Home_And_Origin();
// send new home and ekf origin to GCS
gcs().send_home();
gcs().send_ekf_origin();
// return success
return true;
}
// far_from_EKF_origin - checks if a location is too far from the EKF origin
// returns true if too far
bool Sub::far_from_EKF_origin(const Location& loc)
{
// check distance to EKF origin
const struct Location &ekf_origin = inertial_nav.get_origin();
if (get_distance(ekf_origin, loc) > EKF_ORIGIN_MAX_DIST_M) {
return true;
}
// close enough to origin
return false;
}
// checks if we should update ahrs/RTL home position from GPS
void Sub::set_system_time_from_GPS()
{
// exit immediately if system time already set
if (ap.system_time_set) {
return;
}
// if we have a 3d lock and valid location
if (gps.status() >= AP_GPS::GPS_OK_FIX_3D) {
uint64_t gps_timestamp = gps.time_epoch_usec();
// set system clock for log timestamps
hal.util->set_system_clock(gps_timestamp);
// update signing timestamp
GCS_MAVLINK::update_signing_timestamp(gps_timestamp);
ap.system_time_set = true;
Log_Write_Event(DATA_SYSTEM_TIME_SET);
}
}