mirror of https://github.com/ArduPilot/ardupilot
2125 lines
95 KiB
C++
2125 lines
95 KiB
C++
/*
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
/*
|
|
support for autotune of helicopters. Based on original autotune code from ArduCopter, written by Leonard Hall
|
|
Converted to a library by Andrew Tridgell, and rewritten to include helicopters by Bill Geyer
|
|
*/
|
|
|
|
#include "AC_AutoTune_Heli.h"
|
|
|
|
#define AUTOTUNE_TESTING_STEP_TIMEOUT_MS 5000U // timeout for tuning mode's testing step
|
|
|
|
#define AUTOTUNE_RD_STEP 0.0005f // minimum increment when increasing/decreasing Rate D term
|
|
#define AUTOTUNE_RP_STEP 0.005f // minimum increment when increasing/decreasing Rate P term
|
|
#define AUTOTUNE_SP_STEP 0.05f // minimum increment when increasing/decreasing Stab P term
|
|
#define AUTOTUNE_PI_RATIO_FOR_TESTING 0.1f // I is set 10x smaller than P during testing
|
|
#define AUTOTUNE_PI_RATIO_FINAL 1.0f // I is set 1x P after testing
|
|
#define AUTOTUNE_YAW_PI_RATIO_FINAL 0.1f // I is set 1x P after testing
|
|
#define AUTOTUNE_RD_MAX 0.020f // maximum Rate D value
|
|
#define AUTOTUNE_RP_MIN 0.02f // minimum Rate P value
|
|
#define AUTOTUNE_RP_MAX 0.3f // maximum Rate P value
|
|
#define AUTOTUNE_SP_MAX 10.0f // maximum Stab P value
|
|
#define AUTOTUNE_SP_MIN 3.0f // maximum Stab P value
|
|
#define AUTOTUNE_RFF_MAX 0.5f // maximum Stab P value
|
|
#define AUTOTUNE_RFF_MIN 0.025f // maximum Stab P value
|
|
#define AUTOTUNE_RD_BACKOFF 1.0f // Rate D gains are reduced to 50% of their maximum value discovered during tuning
|
|
#define AUTOTUNE_RP_BACKOFF 1.0f // Rate P gains are reduced to 97.5% of their maximum value discovered during tuning
|
|
#define AUTOTUNE_SP_BACKOFF 1.0f // Stab P gains are reduced to 90% of their maximum value discovered during tuning
|
|
#define AUTOTUNE_ACCEL_RP_BACKOFF 1.0f // back off from maximum acceleration
|
|
#define AUTOTUNE_ACCEL_Y_BACKOFF 1.0f // back off from maximum acceleration
|
|
|
|
#define AUTOTUNE_HELI_TARGET_ANGLE_RLLPIT_CD 1500 // target roll/pitch angle during AUTOTUNE FeedForward rate test
|
|
#define AUTOTUNE_HELI_TARGET_RATE_RLLPIT_CDS 5000 // target roll/pitch rate during AUTOTUNE FeedForward rate test
|
|
#define AUTOTUNE_FFI_RATIO_FOR_TESTING 0.5f // I is set 2x smaller than VFF during testing
|
|
#define AUTOTUNE_FFI_RATIO_FINAL 0.5f // I is set 0.5x VFF after testing
|
|
#define AUTOTUNE_RP_ACCEL_MIN 20000.0f // Minimum acceleration for Roll and Pitch
|
|
#define AUTOTUNE_Y_ACCEL_MIN 10000.0f // Minimum acceleration for Yaw
|
|
|
|
#define AUTOTUNE_SEQ_BITMASK_VFF 1
|
|
#define AUTOTUNE_SEQ_BITMASK_RATE_D 2
|
|
#define AUTOTUNE_SEQ_BITMASK_ANGLE_P 4
|
|
#define AUTOTUNE_SEQ_BITMASK_MAX_GAIN 8
|
|
|
|
const AP_Param::GroupInfo AC_AutoTune_Heli::var_info[] = {
|
|
|
|
// @Param: AXES
|
|
// @DisplayName: Autotune axis bitmask
|
|
// @Description: 1-byte bitmap of axes to autotune
|
|
// @Bitmask: 0:Roll,1:Pitch,2:Yaw
|
|
// @User: Standard
|
|
AP_GROUPINFO("AXES", 1, AC_AutoTune_Heli, axis_bitmask, 1),
|
|
|
|
// @Param: SEQ
|
|
// @DisplayName: AutoTune Sequence Bitmask
|
|
// @Description: 2-byte bitmask to select what tuning should be performed. Max gain automatically performed if Rate D is selected. Values: 7:All,1:VFF Only,2:Rate D/Rate P Only(incl max gain),4:Angle P Only,8:Max Gain Only,3:VFF and Rate D/Rate P(incl max gain),5:VFF and Angle P,6:Rate D/Rate P(incl max gain) and angle P
|
|
// @Bitmask: 0:VFF,1:Rate D/Rate P(incl max gain),2:Angle P,3:Max Gain Only
|
|
// @User: Standard
|
|
AP_GROUPINFO("SEQ", 2, AC_AutoTune_Heli, seq_bitmask, 3),
|
|
|
|
// @Param: FRQ_MIN
|
|
// @DisplayName: AutoTune minimum sweep frequency
|
|
// @Description: Defines the start frequency for sweeps and dwells
|
|
// @Range: 10 30
|
|
// @User: Standard
|
|
AP_GROUPINFO("FRQ_MIN", 3, AC_AutoTune_Heli, min_sweep_freq, 10.0f),
|
|
|
|
// @Param: FRQ_MAX
|
|
// @DisplayName: AutoTune maximum sweep frequency
|
|
// @Description: Defines the end frequency for sweeps and dwells
|
|
// @Range: 50 120
|
|
// @User: Standard
|
|
AP_GROUPINFO("FRQ_MAX", 4, AC_AutoTune_Heli, max_sweep_freq, 70.0f),
|
|
|
|
// @Param: GN_MAX
|
|
// @DisplayName: AutoTune maximum response gain
|
|
// @Description: Defines the response gain (output/input) to tune
|
|
// @Range: 1 2.5
|
|
// @User: Standard
|
|
AP_GROUPINFO("GN_MAX", 5, AC_AutoTune_Heli, max_resp_gain, 1.0f),
|
|
|
|
// @Param: VELXY_P
|
|
// @DisplayName: AutoTune velocity xy P gain
|
|
// @Description: Velocity xy P gain used to hold position during Max Gain, Rate P, and Rate D frequency sweeps
|
|
// @Range: 0 1
|
|
// @User: Standard
|
|
AP_GROUPINFO("VELXY_P", 6, AC_AutoTune_Heli, vel_hold_gain, 0.1f),
|
|
|
|
AP_GROUPEND
|
|
};
|
|
|
|
// constructor
|
|
AC_AutoTune_Heli::AC_AutoTune_Heli()
|
|
{
|
|
tune_seq[0] = TUNE_COMPLETE;
|
|
AP_Param::setup_object_defaults(this, var_info);
|
|
}
|
|
|
|
// initialize tests for each tune type
|
|
void AC_AutoTune_Heli::test_init()
|
|
{
|
|
switch (tune_type) {
|
|
case RFF_UP:
|
|
rate_ff_test_init();
|
|
step_time_limit_ms = 10000;
|
|
break;
|
|
case MAX_GAINS:
|
|
case RP_UP:
|
|
case RD_UP:
|
|
// initialize start frequency
|
|
if (is_zero(start_freq)) {
|
|
if (tune_type == RP_UP) {
|
|
// continue using frequency where testing left off or RD_UP completed
|
|
if (test_phase[12] > 0.0f && test_phase[12] < 180.0f) {
|
|
freq_cnt = 12;
|
|
// start with freq found for sweep where phase was 180 deg
|
|
} else if (!is_zero(sweep.ph180_freq)) {
|
|
freq_cnt = 12;
|
|
test_freq[freq_cnt] = sweep.ph180_freq - 0.25f * 3.14159f * 2.0f;
|
|
// otherwise start at min freq to step up in dwell frequency until phase > 160 deg
|
|
} else {
|
|
freq_cnt = 0;
|
|
test_freq[freq_cnt] = min_sweep_freq;
|
|
}
|
|
curr_test_freq = test_freq[freq_cnt];
|
|
start_freq = curr_test_freq;
|
|
stop_freq = curr_test_freq;
|
|
|
|
// MAX_GAINS and RD_UP both start with a sweep initially but if it has been completed then start dwells at the freq for 180 deg phase
|
|
} else {
|
|
if (!is_zero(sweep.ph180_freq)) {
|
|
freq_cnt = 12;
|
|
test_freq[freq_cnt] = sweep.ph180_freq - 0.25f * 3.14159f * 2.0f;
|
|
curr_test_freq = test_freq[freq_cnt];
|
|
start_freq = curr_test_freq;
|
|
stop_freq = curr_test_freq;
|
|
if (tune_type == MAX_GAINS) {
|
|
reset_maxgains_update_gain_variables();
|
|
}
|
|
} else {
|
|
start_freq = min_sweep_freq;
|
|
stop_freq = max_sweep_freq;
|
|
}
|
|
}
|
|
}
|
|
if (!is_equal(start_freq,stop_freq)) {
|
|
// initialize determine_gain function whenever test is initialized
|
|
freqresp_rate.init(AC_AutoTune_FreqResp::InputType::SWEEP, AC_AutoTune_FreqResp::ResponseType::RATE);
|
|
dwell_test_init(start_freq, stop_freq);
|
|
} else {
|
|
// initialize determine_gain function whenever test is initialized
|
|
freqresp_rate.init(AC_AutoTune_FreqResp::InputType::DWELL, AC_AutoTune_FreqResp::ResponseType::RATE);
|
|
dwell_test_init(start_freq, start_freq);
|
|
}
|
|
if (!is_zero(start_freq)) {
|
|
// 4 seconds is added to allow aircraft to achieve start attitude. Then the time to conduct the dwells is added to it.
|
|
step_time_limit_ms = (uint32_t)(4000 + (float)(AUTOTUNE_DWELL_CYCLES + 2) * 1000.0f * M_2PI / start_freq);
|
|
}
|
|
break;
|
|
case SP_UP:
|
|
// initialize start frequency
|
|
if (is_zero(start_freq)) {
|
|
if (!is_zero(sweep.maxgain_freq)) {
|
|
freq_cnt = 12;
|
|
test_freq[freq_cnt] = sweep.maxgain_freq - 0.25f * 3.14159f * 2.0f;
|
|
curr_test_freq = test_freq[freq_cnt];
|
|
start_freq = curr_test_freq;
|
|
stop_freq = curr_test_freq;
|
|
test_accel_max = 0.0f;
|
|
} else {
|
|
start_freq = min_sweep_freq;
|
|
stop_freq = max_sweep_freq;
|
|
}
|
|
}
|
|
|
|
if (!is_equal(start_freq,stop_freq)) {
|
|
// initialize determine gain function
|
|
freqresp_angle.init(AC_AutoTune_FreqResp::InputType::SWEEP, AC_AutoTune_FreqResp::ResponseType::ANGLE);
|
|
angle_dwell_test_init(start_freq, stop_freq);
|
|
} else {
|
|
// initialize determine gain function
|
|
freqresp_angle.init(AC_AutoTune_FreqResp::InputType::DWELL, AC_AutoTune_FreqResp::ResponseType::ANGLE);
|
|
angle_dwell_test_init(start_freq, start_freq);
|
|
}
|
|
|
|
// TODO add time limit for sweep test
|
|
if (!is_zero(start_freq)) {
|
|
// 1 seconds is added for a little buffer. Then the time to conduct the dwells is added to it.
|
|
step_time_limit_ms = (uint32_t)(2000 + (float)(AUTOTUNE_DWELL_CYCLES + 7) * 1000.0f * M_2PI / start_freq);
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
start_angles = Vector3f(roll_cd, pitch_cd, desired_yaw_cd); // heli specific
|
|
}
|
|
|
|
// run tests for each tune type
|
|
void AC_AutoTune_Heli::test_run(AxisType test_axis, const float dir_sign)
|
|
{
|
|
// if tune complete or beyond frequency range or no max allowed gains then exit testing
|
|
if (tune_type == TUNE_COMPLETE ||
|
|
(tune_type == RP_UP && max_rate_p.max_allowed <= 0.0f) ||
|
|
(tune_type == RD_UP && max_rate_d.max_allowed <= 0.0f) ||
|
|
((tune_type == MAX_GAINS || tune_type == RP_UP || tune_type == RD_UP || tune_type == SP_UP) && exceeded_freq_range(start_freq))){
|
|
|
|
load_gains(GAIN_INTRA_TEST);
|
|
|
|
attitude_control->use_sqrt_controller(true);
|
|
|
|
get_poshold_attitude(roll_cd, pitch_cd, desired_yaw_cd);
|
|
|
|
// hold level attitude
|
|
attitude_control->input_euler_angle_roll_pitch_yaw(roll_cd, pitch_cd, desired_yaw_cd, true);
|
|
|
|
if ((tune_type == RP_UP && max_rate_p.max_allowed <= 0.0f) || (tune_type == RD_UP && max_rate_d.max_allowed <= 0.0f)) {
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: Max Gains Failed, Skip Rate P/D Tuning");
|
|
counter = AUTOTUNE_SUCCESS_COUNT;
|
|
step = UPDATE_GAINS;
|
|
} else if ((tune_type == MAX_GAINS || tune_type == RP_UP || tune_type == RD_UP || tune_type == SP_UP) && exceeded_freq_range(start_freq)){
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: Exceeded frequency range");
|
|
AP::logger().Write_Event(LogEvent::AUTOTUNE_REACHED_LIMIT);
|
|
counter = AUTOTUNE_SUCCESS_COUNT;
|
|
step = UPDATE_GAINS;
|
|
} else if (tune_type == TUNE_COMPLETE) {
|
|
counter = AUTOTUNE_SUCCESS_COUNT;
|
|
step = UPDATE_GAINS;
|
|
}
|
|
return;
|
|
}
|
|
|
|
switch (tune_type) {
|
|
case RFF_UP:
|
|
rate_ff_test_run(AUTOTUNE_HELI_TARGET_ANGLE_RLLPIT_CD, AUTOTUNE_HELI_TARGET_RATE_RLLPIT_CDS, dir_sign);
|
|
break;
|
|
case RP_UP:
|
|
case RD_UP:
|
|
dwell_test_run(1, start_freq, stop_freq, test_gain[freq_cnt], test_phase[freq_cnt]);
|
|
break;
|
|
case MAX_GAINS:
|
|
dwell_test_run(0, start_freq, stop_freq, test_gain[freq_cnt], test_phase[freq_cnt]);
|
|
break;
|
|
case SP_UP:
|
|
angle_dwell_test_run(start_freq, stop_freq, test_gain[freq_cnt], test_phase[freq_cnt]);
|
|
break;
|
|
default:
|
|
step = UPDATE_GAINS;
|
|
break;
|
|
}
|
|
}
|
|
|
|
// heli specific gcs announcements
|
|
void AC_AutoTune_Heli::do_gcs_announcements()
|
|
{
|
|
const uint32_t now = AP_HAL::millis();
|
|
if (now - announce_time < AUTOTUNE_ANNOUNCE_INTERVAL_MS) {
|
|
return;
|
|
}
|
|
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: %s %s", axis_string(), type_string());
|
|
send_step_string();
|
|
switch (tune_type) {
|
|
case RD_UP:
|
|
case RP_UP:
|
|
case MAX_GAINS:
|
|
case SP_UP:
|
|
if (is_equal(start_freq,stop_freq)) {
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: Dwell");
|
|
} else {
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: Sweep");
|
|
if (settle_time == 0) {
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: freq=%f gain=%f phase=%f", (double)(curr_test_freq), (double)(curr_test_gain), (double)(curr_test_phase));
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
announce_time = now;
|
|
}
|
|
|
|
// send post test updates to user
|
|
void AC_AutoTune_Heli::do_post_test_gcs_announcements() {
|
|
float tune_rp = 0.0f;
|
|
float tune_rd = 0.0f;
|
|
float tune_rff = 0.0f;
|
|
float tune_sp = 0.0f;
|
|
float tune_accel = 0.0f;
|
|
|
|
switch (axis) {
|
|
case ROLL:
|
|
tune_rp = tune_roll_rp;
|
|
tune_rd = tune_roll_rd;
|
|
tune_rff = tune_roll_rff;
|
|
tune_sp = tune_roll_sp;
|
|
tune_accel = tune_roll_accel;
|
|
break;
|
|
case PITCH:
|
|
tune_rp = tune_pitch_rp;
|
|
tune_rd = tune_pitch_rd;
|
|
tune_rff = tune_pitch_rff;
|
|
tune_sp = tune_pitch_sp;
|
|
tune_accel = tune_pitch_accel;
|
|
break;
|
|
case YAW:
|
|
tune_rp = tune_yaw_rp;
|
|
tune_rd = tune_yaw_rd;
|
|
tune_rff = tune_yaw_rff;
|
|
tune_sp = tune_yaw_sp;
|
|
tune_accel = tune_yaw_accel;
|
|
break;
|
|
}
|
|
|
|
if (step == UPDATE_GAINS) {
|
|
switch (tune_type) {
|
|
case RFF_UP:
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: target=%f rotation=%f command=%f", (double)(test_tgt_rate_filt*57.3f), (double)(test_rate_filt*57.3f), (double)(test_command_filt));
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: ff=%f", (double)tune_rff);
|
|
break;
|
|
case RP_UP:
|
|
if (is_equal(start_freq,stop_freq)) {
|
|
// announce results of dwell
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: freq=%f gain=%f", (double)(test_freq[freq_cnt]), (double)(test_gain[freq_cnt]));
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: ph=%f rate_p=%f", (double)(test_phase[freq_cnt]), (double)(tune_rp));
|
|
} else {
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: max_freq=%f max_gain=%f", (double)(sweep.maxgain_freq), (double)(sweep.maxgain_gain));
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: ph180_freq=%f ph180_gain=%f", (double)(sweep.ph180_freq), (double)(sweep.ph180_gain));
|
|
}
|
|
break;
|
|
case RD_UP:
|
|
// announce results of dwell
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: freq=%f gain=%f", (double)(test_freq[freq_cnt]), (double)(test_gain[freq_cnt]));
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: ph=%f rate_d=%f", (double)(test_phase[freq_cnt]), (double)(tune_rd));
|
|
break;
|
|
case SP_UP:
|
|
if (is_equal(start_freq,stop_freq)) {
|
|
// announce results of dwell and update
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: freq=%f gain=%f", (double)(test_freq[freq_cnt]), (double)(test_gain[freq_cnt]));
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: phase=%f angle_p=%f", (double)(test_phase[freq_cnt]), (double)(tune_sp));
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: tune_accel=%f max_accel=%f", (double)(tune_accel), (double)(test_accel_max));
|
|
} else {
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: max_freq=%f max_gain=%f", (double)(sweep.maxgain_freq), (double)(sweep.maxgain_gain));
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: ph180_freq=%f ph180_gain=%f", (double)(sweep.ph180_freq), (double)(sweep.ph180_gain));
|
|
}
|
|
break;
|
|
case MAX_GAINS:
|
|
if (is_equal(start_freq,stop_freq)) {
|
|
// announce results of dwell and update
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: freq=%f gain=%f ph=%f", (double)(test_freq[freq_cnt]), (double)(test_gain[freq_cnt]), (double)(test_phase[freq_cnt]));
|
|
} else {
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: max_freq=%f max_gain=%f", (double)(sweep.maxgain_freq), (double)(sweep.maxgain_gain));
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: ph180_freq=%f ph180_gain=%f", (double)(sweep.ph180_freq), (double)(sweep.ph180_gain));
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
// backup_gains_and_initialise - store current gains as originals
|
|
// called before tuning starts to backup original gains
|
|
void AC_AutoTune_Heli::backup_gains_and_initialise()
|
|
{
|
|
AC_AutoTune::backup_gains_and_initialise();
|
|
|
|
// initializes dwell test sequence for rate_p_up and rate_d_up tests for tradheli
|
|
freq_cnt = 0;
|
|
start_freq = 0.0f;
|
|
stop_freq = 0.0f;
|
|
|
|
orig_bf_feedforward = attitude_control->get_bf_feedforward();
|
|
|
|
// backup original pids and initialise tuned pid values
|
|
orig_roll_rp = attitude_control->get_rate_roll_pid().kP();
|
|
orig_roll_ri = attitude_control->get_rate_roll_pid().kI();
|
|
orig_roll_rd = attitude_control->get_rate_roll_pid().kD();
|
|
orig_roll_rff = attitude_control->get_rate_roll_pid().ff();
|
|
orig_roll_fltt = attitude_control->get_rate_roll_pid().filt_T_hz();
|
|
orig_roll_smax = attitude_control->get_rate_roll_pid().slew_limit();
|
|
orig_roll_sp = attitude_control->get_angle_roll_p().kP();
|
|
orig_roll_accel = attitude_control->get_accel_roll_max_cdss();
|
|
tune_roll_rp = attitude_control->get_rate_roll_pid().kP();
|
|
tune_roll_rd = attitude_control->get_rate_roll_pid().kD();
|
|
tune_roll_rff = attitude_control->get_rate_roll_pid().ff();
|
|
tune_roll_sp = attitude_control->get_angle_roll_p().kP();
|
|
tune_roll_accel = attitude_control->get_accel_roll_max_cdss();
|
|
|
|
orig_pitch_rp = attitude_control->get_rate_pitch_pid().kP();
|
|
orig_pitch_ri = attitude_control->get_rate_pitch_pid().kI();
|
|
orig_pitch_rd = attitude_control->get_rate_pitch_pid().kD();
|
|
orig_pitch_rff = attitude_control->get_rate_pitch_pid().ff();
|
|
orig_pitch_fltt = attitude_control->get_rate_pitch_pid().filt_T_hz();
|
|
orig_pitch_smax = attitude_control->get_rate_pitch_pid().slew_limit();
|
|
orig_pitch_sp = attitude_control->get_angle_pitch_p().kP();
|
|
orig_pitch_accel = attitude_control->get_accel_pitch_max_cdss();
|
|
tune_pitch_rp = attitude_control->get_rate_pitch_pid().kP();
|
|
tune_pitch_rd = attitude_control->get_rate_pitch_pid().kD();
|
|
tune_pitch_rff = attitude_control->get_rate_pitch_pid().ff();
|
|
tune_pitch_sp = attitude_control->get_angle_pitch_p().kP();
|
|
tune_pitch_accel = attitude_control->get_accel_pitch_max_cdss();
|
|
|
|
orig_yaw_rp = attitude_control->get_rate_yaw_pid().kP();
|
|
orig_yaw_ri = attitude_control->get_rate_yaw_pid().kI();
|
|
orig_yaw_rd = attitude_control->get_rate_yaw_pid().kD();
|
|
orig_yaw_rff = attitude_control->get_rate_yaw_pid().ff();
|
|
orig_yaw_fltt = attitude_control->get_rate_yaw_pid().filt_T_hz();
|
|
orig_yaw_smax = attitude_control->get_rate_yaw_pid().slew_limit();
|
|
orig_yaw_rLPF = attitude_control->get_rate_yaw_pid().filt_E_hz();
|
|
orig_yaw_accel = attitude_control->get_accel_yaw_max_cdss();
|
|
orig_yaw_sp = attitude_control->get_angle_yaw_p().kP();
|
|
tune_yaw_rp = attitude_control->get_rate_yaw_pid().kP();
|
|
tune_yaw_rd = attitude_control->get_rate_yaw_pid().kD();
|
|
tune_yaw_rff = attitude_control->get_rate_yaw_pid().ff();
|
|
tune_yaw_rLPF = attitude_control->get_rate_yaw_pid().filt_E_hz();
|
|
tune_yaw_sp = attitude_control->get_angle_yaw_p().kP();
|
|
tune_yaw_accel = attitude_control->get_accel_yaw_max_cdss();
|
|
|
|
AP::logger().Write_Event(LogEvent::AUTOTUNE_INITIALISED);
|
|
}
|
|
|
|
// load_orig_gains - set gains to their original values
|
|
// called by stop and failed functions
|
|
void AC_AutoTune_Heli::load_orig_gains()
|
|
{
|
|
attitude_control->bf_feedforward(orig_bf_feedforward);
|
|
if (roll_enabled()) {
|
|
attitude_control->get_rate_roll_pid().kP(orig_roll_rp);
|
|
attitude_control->get_rate_roll_pid().kI(orig_roll_ri);
|
|
attitude_control->get_rate_roll_pid().kD(orig_roll_rd);
|
|
attitude_control->get_rate_roll_pid().ff(orig_roll_rff);
|
|
attitude_control->get_rate_roll_pid().filt_T_hz(orig_roll_fltt);
|
|
attitude_control->get_rate_roll_pid().slew_limit(orig_roll_smax);
|
|
attitude_control->get_angle_roll_p().kP(orig_roll_sp);
|
|
attitude_control->set_accel_roll_max_cdss(orig_roll_accel);
|
|
}
|
|
if (pitch_enabled()) {
|
|
attitude_control->get_rate_pitch_pid().kP(orig_pitch_rp);
|
|
attitude_control->get_rate_pitch_pid().kI(orig_pitch_ri);
|
|
attitude_control->get_rate_pitch_pid().kD(orig_pitch_rd);
|
|
attitude_control->get_rate_pitch_pid().ff(orig_pitch_rff);
|
|
attitude_control->get_rate_pitch_pid().filt_T_hz(orig_pitch_fltt);
|
|
attitude_control->get_rate_pitch_pid().slew_limit(orig_pitch_smax);
|
|
attitude_control->get_angle_pitch_p().kP(orig_pitch_sp);
|
|
attitude_control->set_accel_pitch_max_cdss(orig_pitch_accel);
|
|
}
|
|
if (yaw_enabled()) {
|
|
attitude_control->get_rate_yaw_pid().kP(orig_yaw_rp);
|
|
attitude_control->get_rate_yaw_pid().kI(orig_yaw_ri);
|
|
attitude_control->get_rate_yaw_pid().kD(orig_yaw_rd);
|
|
attitude_control->get_rate_yaw_pid().ff(orig_yaw_rff);
|
|
attitude_control->get_rate_yaw_pid().filt_E_hz(orig_yaw_rLPF);
|
|
attitude_control->get_rate_yaw_pid().filt_T_hz(orig_yaw_fltt);
|
|
attitude_control->get_rate_yaw_pid().slew_limit(orig_yaw_smax);
|
|
attitude_control->get_angle_yaw_p().kP(orig_yaw_sp);
|
|
attitude_control->set_accel_yaw_max_cdss(orig_yaw_accel);
|
|
}
|
|
}
|
|
|
|
// load_tuned_gains - load tuned gains
|
|
void AC_AutoTune_Heli::load_tuned_gains()
|
|
{
|
|
if (!attitude_control->get_bf_feedforward()) {
|
|
attitude_control->bf_feedforward(true);
|
|
attitude_control->set_accel_roll_max_cdss(0.0f);
|
|
attitude_control->set_accel_pitch_max_cdss(0.0f);
|
|
}
|
|
if (roll_enabled()) {
|
|
attitude_control->get_rate_roll_pid().kP(tune_roll_rp);
|
|
attitude_control->get_rate_roll_pid().kI(tune_roll_rff*AUTOTUNE_FFI_RATIO_FINAL);
|
|
attitude_control->get_rate_roll_pid().kD(tune_roll_rd);
|
|
attitude_control->get_rate_roll_pid().ff(tune_roll_rff);
|
|
attitude_control->get_angle_roll_p().kP(tune_roll_sp);
|
|
attitude_control->set_accel_roll_max_cdss(tune_roll_accel);
|
|
}
|
|
if (pitch_enabled()) {
|
|
attitude_control->get_rate_pitch_pid().kP(tune_pitch_rp);
|
|
attitude_control->get_rate_pitch_pid().kI(tune_pitch_rff*AUTOTUNE_FFI_RATIO_FINAL);
|
|
attitude_control->get_rate_pitch_pid().kD(tune_pitch_rd);
|
|
attitude_control->get_rate_pitch_pid().ff(tune_pitch_rff);
|
|
attitude_control->get_angle_pitch_p().kP(tune_pitch_sp);
|
|
attitude_control->set_accel_pitch_max_cdss(tune_pitch_accel);
|
|
}
|
|
if (yaw_enabled()) {
|
|
if (!is_zero(tune_yaw_rp)) {
|
|
attitude_control->get_rate_yaw_pid().kP(tune_yaw_rp);
|
|
attitude_control->get_rate_yaw_pid().kI(tune_yaw_rp*AUTOTUNE_YAW_PI_RATIO_FINAL);
|
|
attitude_control->get_rate_yaw_pid().kD(tune_yaw_rd);
|
|
attitude_control->get_rate_yaw_pid().ff(tune_yaw_rff);
|
|
attitude_control->get_rate_yaw_pid().filt_E_hz(tune_yaw_rLPF);
|
|
attitude_control->get_angle_yaw_p().kP(tune_yaw_sp);
|
|
attitude_control->set_accel_yaw_max_cdss(tune_yaw_accel);
|
|
}
|
|
}
|
|
}
|
|
|
|
// load_intra_test_gains - gains used between tests
|
|
// called during testing mode's update-gains step to set gains ahead of return-to-level step
|
|
void AC_AutoTune_Heli::load_intra_test_gains()
|
|
{
|
|
// we are restarting tuning so reset gains to tuning-start gains (i.e. low I term)
|
|
// sanity check the gains
|
|
attitude_control->bf_feedforward(true);
|
|
if (roll_enabled()) {
|
|
attitude_control->get_rate_roll_pid().kP(orig_roll_rp);
|
|
attitude_control->get_rate_roll_pid().kI(orig_roll_rff * AUTOTUNE_FFI_RATIO_FOR_TESTING);
|
|
attitude_control->get_rate_roll_pid().kD(orig_roll_rd);
|
|
attitude_control->get_rate_roll_pid().ff(orig_roll_rff);
|
|
attitude_control->get_rate_roll_pid().filt_T_hz(orig_roll_fltt);
|
|
attitude_control->get_rate_roll_pid().slew_limit(orig_roll_smax);
|
|
attitude_control->get_angle_roll_p().kP(orig_roll_sp);
|
|
attitude_control->set_accel_roll_max_cdss(orig_roll_accel);
|
|
}
|
|
if (pitch_enabled()) {
|
|
attitude_control->get_rate_pitch_pid().kP(orig_pitch_rp);
|
|
attitude_control->get_rate_pitch_pid().kI(orig_pitch_rff * AUTOTUNE_FFI_RATIO_FOR_TESTING);
|
|
attitude_control->get_rate_pitch_pid().kD(orig_pitch_rd);
|
|
attitude_control->get_rate_pitch_pid().ff(orig_pitch_rff);
|
|
attitude_control->get_rate_pitch_pid().filt_T_hz(orig_pitch_fltt);
|
|
attitude_control->get_rate_pitch_pid().slew_limit(orig_pitch_smax);
|
|
attitude_control->get_angle_pitch_p().kP(orig_pitch_sp);
|
|
attitude_control->set_accel_pitch_max_cdss(orig_pitch_accel);
|
|
}
|
|
if (yaw_enabled()) {
|
|
attitude_control->get_rate_yaw_pid().kP(orig_yaw_rp);
|
|
attitude_control->get_rate_yaw_pid().kI(orig_yaw_rp*AUTOTUNE_PI_RATIO_FOR_TESTING);
|
|
attitude_control->get_rate_yaw_pid().kD(orig_yaw_rd);
|
|
attitude_control->get_rate_yaw_pid().ff(orig_yaw_rff);
|
|
attitude_control->get_rate_yaw_pid().filt_T_hz(orig_yaw_fltt);
|
|
attitude_control->get_rate_yaw_pid().slew_limit(orig_yaw_smax);
|
|
attitude_control->get_rate_yaw_pid().filt_E_hz(orig_yaw_rLPF);
|
|
attitude_control->get_angle_yaw_p().kP(orig_yaw_sp);
|
|
attitude_control->set_accel_yaw_max_cdss(orig_yaw_accel);
|
|
}
|
|
}
|
|
|
|
// load_test_gains - load the to-be-tested gains for a single axis
|
|
// called by control_attitude() just before it beings testing a gain (i.e. just before it twitches)
|
|
void AC_AutoTune_Heli::load_test_gains()
|
|
{
|
|
switch (axis) {
|
|
case ROLL:
|
|
if (tune_type == SP_UP) {
|
|
attitude_control->get_rate_roll_pid().kI(orig_roll_ri);
|
|
} else {
|
|
// freeze integrator to hold trim by making i term small during rate controller tuning
|
|
attitude_control->get_rate_roll_pid().kI(0.01f * orig_roll_ri);
|
|
}
|
|
if (tune_type == MAX_GAINS && !is_zero(tune_roll_rff)) {
|
|
attitude_control->get_rate_roll_pid().kP(0.0f);
|
|
attitude_control->get_rate_roll_pid().kD(0.0f);
|
|
} else {
|
|
attitude_control->get_rate_roll_pid().kP(tune_roll_rp);
|
|
attitude_control->get_rate_roll_pid().kD(tune_roll_rd);
|
|
}
|
|
attitude_control->get_rate_roll_pid().ff(tune_roll_rff);
|
|
attitude_control->get_rate_roll_pid().filt_T_hz(orig_roll_fltt);
|
|
attitude_control->get_rate_roll_pid().slew_limit(0.0f);
|
|
attitude_control->get_angle_roll_p().kP(tune_roll_sp);
|
|
break;
|
|
case PITCH:
|
|
if (tune_type == SP_UP) {
|
|
attitude_control->get_rate_pitch_pid().kI(orig_pitch_ri);
|
|
} else {
|
|
// freeze integrator to hold trim by making i term small during rate controller tuning
|
|
attitude_control->get_rate_pitch_pid().kI(0.01f * orig_pitch_ri);
|
|
}
|
|
if (tune_type == MAX_GAINS && !is_zero(tune_pitch_rff)) {
|
|
attitude_control->get_rate_pitch_pid().kP(0.0f);
|
|
attitude_control->get_rate_pitch_pid().kD(0.0f);
|
|
} else {
|
|
attitude_control->get_rate_pitch_pid().kP(tune_pitch_rp);
|
|
attitude_control->get_rate_pitch_pid().kD(tune_pitch_rd);
|
|
}
|
|
attitude_control->get_rate_pitch_pid().ff(tune_pitch_rff);
|
|
attitude_control->get_rate_pitch_pid().filt_T_hz(orig_pitch_fltt);
|
|
attitude_control->get_rate_pitch_pid().slew_limit(0.0f);
|
|
attitude_control->get_angle_pitch_p().kP(tune_pitch_sp);
|
|
break;
|
|
case YAW:
|
|
// freeze integrator to hold trim by making i term small during rate controller tuning
|
|
attitude_control->get_rate_yaw_pid().kP(tune_yaw_rp);
|
|
attitude_control->get_rate_yaw_pid().kI(tune_yaw_rp*0.01f);
|
|
attitude_control->get_rate_yaw_pid().kD(tune_yaw_rd);
|
|
attitude_control->get_rate_yaw_pid().ff(tune_yaw_rff);
|
|
attitude_control->get_rate_yaw_pid().filt_E_hz(tune_yaw_rLPF);
|
|
attitude_control->get_rate_yaw_pid().filt_T_hz(orig_yaw_fltt);
|
|
attitude_control->get_rate_yaw_pid().slew_limit(0.0f);
|
|
attitude_control->get_angle_yaw_p().kP(tune_yaw_sp);
|
|
break;
|
|
}
|
|
}
|
|
|
|
// save_tuning_gains - save the final tuned gains for each axis
|
|
// save discovered gains to eeprom if autotuner is enabled (i.e. switch is in the high position)
|
|
void AC_AutoTune_Heli::save_tuning_gains()
|
|
{
|
|
// see if we successfully completed tuning of at least one axis
|
|
if (axes_completed == 0) {
|
|
return;
|
|
}
|
|
|
|
if (!attitude_control->get_bf_feedforward()) {
|
|
attitude_control->bf_feedforward_save(true);
|
|
attitude_control->save_accel_roll_max_cdss(0.0f);
|
|
attitude_control->save_accel_pitch_max_cdss(0.0f);
|
|
}
|
|
|
|
// sanity check the rate P values
|
|
if ((axes_completed & AUTOTUNE_AXIS_BITMASK_ROLL) && roll_enabled()) {
|
|
// rate roll gains
|
|
attitude_control->get_rate_roll_pid().kP(tune_roll_rp);
|
|
attitude_control->get_rate_roll_pid().kI(tune_roll_rff*AUTOTUNE_FFI_RATIO_FINAL);
|
|
attitude_control->get_rate_roll_pid().kD(tune_roll_rd);
|
|
attitude_control->get_rate_roll_pid().ff(tune_roll_rff);
|
|
attitude_control->get_rate_roll_pid().filt_T_hz(orig_roll_fltt);
|
|
attitude_control->get_rate_roll_pid().slew_limit(orig_roll_smax);
|
|
attitude_control->get_rate_roll_pid().save_gains();
|
|
|
|
// stabilize roll
|
|
attitude_control->get_angle_roll_p().kP(tune_roll_sp);
|
|
attitude_control->get_angle_roll_p().save_gains();
|
|
|
|
// acceleration roll
|
|
attitude_control->save_accel_roll_max_cdss(tune_roll_accel);
|
|
|
|
// resave pids to originals in case the autotune is run again
|
|
orig_roll_rp = attitude_control->get_rate_roll_pid().kP();
|
|
orig_roll_ri = attitude_control->get_rate_roll_pid().kI();
|
|
orig_roll_rd = attitude_control->get_rate_roll_pid().kD();
|
|
orig_roll_rff = attitude_control->get_rate_roll_pid().ff();
|
|
orig_roll_sp = attitude_control->get_angle_roll_p().kP();
|
|
orig_roll_accel = attitude_control->get_accel_roll_max_cdss();
|
|
}
|
|
|
|
if ((axes_completed & AUTOTUNE_AXIS_BITMASK_PITCH) && pitch_enabled()) {
|
|
// rate pitch gains
|
|
attitude_control->get_rate_pitch_pid().kP(tune_pitch_rp);
|
|
attitude_control->get_rate_pitch_pid().kI(tune_pitch_rff*AUTOTUNE_FFI_RATIO_FINAL);
|
|
attitude_control->get_rate_pitch_pid().kD(tune_pitch_rd);
|
|
attitude_control->get_rate_pitch_pid().ff(tune_pitch_rff);
|
|
attitude_control->get_rate_pitch_pid().filt_T_hz(orig_pitch_fltt);
|
|
attitude_control->get_rate_pitch_pid().slew_limit(orig_pitch_smax);
|
|
attitude_control->get_rate_pitch_pid().save_gains();
|
|
|
|
// stabilize pitch
|
|
attitude_control->get_angle_pitch_p().kP(tune_pitch_sp);
|
|
attitude_control->get_angle_pitch_p().save_gains();
|
|
|
|
// acceleration pitch
|
|
attitude_control->save_accel_pitch_max_cdss(tune_pitch_accel);
|
|
|
|
// resave pids to originals in case the autotune is run again
|
|
orig_pitch_rp = attitude_control->get_rate_pitch_pid().kP();
|
|
orig_pitch_ri = attitude_control->get_rate_pitch_pid().kI();
|
|
orig_pitch_rd = attitude_control->get_rate_pitch_pid().kD();
|
|
orig_pitch_rff = attitude_control->get_rate_pitch_pid().ff();
|
|
orig_pitch_sp = attitude_control->get_angle_pitch_p().kP();
|
|
orig_pitch_accel = attitude_control->get_accel_pitch_max_cdss();
|
|
}
|
|
|
|
if ((axes_completed & AUTOTUNE_AXIS_BITMASK_YAW) && yaw_enabled() && !is_zero(tune_yaw_rp)) {
|
|
// rate yaw gains
|
|
attitude_control->get_rate_yaw_pid().kP(tune_yaw_rp);
|
|
attitude_control->get_rate_yaw_pid().kI(tune_yaw_rp*AUTOTUNE_YAW_PI_RATIO_FINAL);
|
|
attitude_control->get_rate_yaw_pid().kD(tune_yaw_rd);
|
|
attitude_control->get_rate_yaw_pid().ff(tune_yaw_rff);
|
|
attitude_control->get_rate_yaw_pid().filt_T_hz(orig_yaw_fltt);
|
|
attitude_control->get_rate_yaw_pid().slew_limit(orig_yaw_smax);
|
|
attitude_control->get_rate_yaw_pid().filt_E_hz(orig_yaw_rLPF);
|
|
attitude_control->get_rate_yaw_pid().save_gains();
|
|
|
|
// stabilize yaw
|
|
attitude_control->get_angle_yaw_p().kP(tune_yaw_sp);
|
|
attitude_control->get_angle_yaw_p().save_gains();
|
|
|
|
// acceleration yaw
|
|
attitude_control->save_accel_yaw_max_cdss(tune_yaw_accel);
|
|
|
|
// resave pids to originals in case the autotune is run again
|
|
orig_yaw_rp = attitude_control->get_rate_yaw_pid().kP();
|
|
orig_yaw_ri = attitude_control->get_rate_yaw_pid().kI();
|
|
orig_yaw_rd = attitude_control->get_rate_yaw_pid().kD();
|
|
orig_yaw_rff = attitude_control->get_rate_yaw_pid().ff();
|
|
orig_yaw_rLPF = attitude_control->get_rate_yaw_pid().filt_E_hz();
|
|
orig_yaw_sp = attitude_control->get_angle_yaw_p().kP();
|
|
orig_yaw_accel = attitude_control->get_accel_yaw_max_cdss();
|
|
}
|
|
|
|
// update GCS and log save gains event
|
|
update_gcs(AUTOTUNE_MESSAGE_SAVED_GAINS);
|
|
AP::logger().Write_Event(LogEvent::AUTOTUNE_SAVEDGAINS);
|
|
|
|
reset();
|
|
}
|
|
|
|
void AC_AutoTune_Heli::rate_ff_test_init()
|
|
{
|
|
ff_test_phase = 0;
|
|
rotation_rate_filt.reset(0);
|
|
rotation_rate_filt.set_cutoff_frequency(5.0f);
|
|
command_filt.reset(0);
|
|
command_filt.set_cutoff_frequency(5.0f);
|
|
target_rate_filt.reset(0);
|
|
target_rate_filt.set_cutoff_frequency(5.0f);
|
|
test_command_filt = 0.0f;
|
|
test_rate_filt = 0.0f;
|
|
test_tgt_rate_filt = 0.0f;
|
|
filt_target_rate = 0.0f;
|
|
settle_time = 200;
|
|
phase_out_time = 500;
|
|
rate_request_cds.reset(0);
|
|
rate_request_cds.set_cutoff_frequency(1.0f);
|
|
angle_request_cd.reset(0);
|
|
angle_request_cd.set_cutoff_frequency(1.0f);
|
|
}
|
|
|
|
void AC_AutoTune_Heli::rate_ff_test_run(float max_angle_cd, float target_rate_cds, float dir_sign)
|
|
{
|
|
float gyro_reading = 0.0f;
|
|
float command_reading =0.0f;
|
|
float tgt_rate_reading = 0.0f;
|
|
const uint32_t now = AP_HAL::millis();
|
|
|
|
target_rate_cds = dir_sign * target_rate_cds;
|
|
|
|
switch (axis) {
|
|
case ROLL:
|
|
gyro_reading = ahrs_view->get_gyro().x;
|
|
command_reading = motors->get_roll();
|
|
tgt_rate_reading = attitude_control->rate_bf_targets().x;
|
|
if (settle_time > 0) {
|
|
settle_time--;
|
|
trim_command_reading = motors->get_roll();
|
|
rate_request_cds.reset(gyro_reading);
|
|
} else if (((ahrs_view->roll_sensor <= max_angle_cd + start_angle && is_positive(dir_sign))
|
|
|| (ahrs_view->roll_sensor >= -max_angle_cd + start_angle && !is_positive(dir_sign)))
|
|
&& ff_test_phase == 0) {
|
|
rate_request_cds.apply(target_rate_cds, AP::scheduler().get_loop_period_s());
|
|
attitude_control->input_rate_bf_roll_pitch_yaw(rate_request_cds.get(), 0.0f, 0.0f);
|
|
} else if (((ahrs_view->roll_sensor > max_angle_cd + start_angle && is_positive(dir_sign))
|
|
|| (ahrs_view->roll_sensor < -max_angle_cd + start_angle && !is_positive(dir_sign)))
|
|
&& ff_test_phase == 0) {
|
|
ff_test_phase = 1;
|
|
rate_request_cds.apply(-target_rate_cds, AP::scheduler().get_loop_period_s());
|
|
attitude_control->input_rate_bf_roll_pitch_yaw(rate_request_cds.get(), 0.0f, 0.0f);
|
|
attitude_control->rate_bf_roll_target(rate_request_cds.get());
|
|
} else if (((ahrs_view->roll_sensor >= -max_angle_cd + start_angle && is_positive(dir_sign))
|
|
|| (ahrs_view->roll_sensor <= max_angle_cd + start_angle && !is_positive(dir_sign)))
|
|
&& ff_test_phase == 1 ) {
|
|
rate_request_cds.apply(-target_rate_cds, AP::scheduler().get_loop_period_s());
|
|
attitude_control->input_rate_bf_roll_pitch_yaw(rate_request_cds.get(), 0.0f, 0.0f);
|
|
attitude_control->rate_bf_roll_target(rate_request_cds.get());
|
|
} else if (((ahrs_view->roll_sensor < -max_angle_cd + start_angle && is_positive(dir_sign))
|
|
|| (ahrs_view->roll_sensor > max_angle_cd + start_angle && !is_positive(dir_sign)))
|
|
&& ff_test_phase == 1 ) {
|
|
ff_test_phase = 2;
|
|
attitude_control->reset_target_and_rate(false);
|
|
angle_request_cd.reset(ahrs_view->roll_sensor);
|
|
attitude_control->input_euler_angle_roll_pitch_euler_rate_yaw(angle_request_cd.get(), start_angles.y, 0.0f);
|
|
} else if (ff_test_phase == 2 ) {
|
|
angle_request_cd.apply(start_angles.x, AP::scheduler().get_loop_period_s());
|
|
attitude_control->input_euler_angle_roll_pitch_euler_rate_yaw(angle_request_cd.get(), start_angles.y, 0.0f);
|
|
phase_out_time--;
|
|
}
|
|
break;
|
|
case PITCH:
|
|
gyro_reading = ahrs_view->get_gyro().y;
|
|
command_reading = motors->get_pitch();
|
|
tgt_rate_reading = attitude_control->rate_bf_targets().y;
|
|
if (settle_time > 0) {
|
|
settle_time--;
|
|
trim_command_reading = motors->get_pitch();
|
|
rate_request_cds.reset(gyro_reading);
|
|
} else if (((ahrs_view->pitch_sensor <= max_angle_cd + start_angle && is_positive(dir_sign))
|
|
|| (ahrs_view->pitch_sensor >= -max_angle_cd + start_angle && !is_positive(dir_sign)))
|
|
&& ff_test_phase == 0) {
|
|
rate_request_cds.apply(target_rate_cds, AP::scheduler().get_loop_period_s());
|
|
attitude_control->input_rate_bf_roll_pitch_yaw(0.0f, rate_request_cds.get(), 0.0f);
|
|
} else if (((ahrs_view->pitch_sensor > max_angle_cd + start_angle && is_positive(dir_sign))
|
|
|| (ahrs_view->pitch_sensor < -max_angle_cd + start_angle && !is_positive(dir_sign)))
|
|
&& ff_test_phase == 0) {
|
|
ff_test_phase = 1;
|
|
rate_request_cds.apply(-target_rate_cds, AP::scheduler().get_loop_period_s());
|
|
attitude_control->input_rate_bf_roll_pitch_yaw(0.0f, rate_request_cds.get(), 0.0f);
|
|
attitude_control->rate_bf_pitch_target(rate_request_cds.get());
|
|
} else if (((ahrs_view->pitch_sensor >= -max_angle_cd + start_angle && is_positive(dir_sign))
|
|
|| (ahrs_view->pitch_sensor <= max_angle_cd + start_angle && !is_positive(dir_sign)))
|
|
&& ff_test_phase == 1 ) {
|
|
rate_request_cds.apply(-target_rate_cds, AP::scheduler().get_loop_period_s());
|
|
attitude_control->input_rate_bf_roll_pitch_yaw(0.0f, rate_request_cds.get(), 0.0f);
|
|
attitude_control->rate_bf_pitch_target(rate_request_cds.get());
|
|
} else if (((ahrs_view->pitch_sensor < -max_angle_cd + start_angle && is_positive(dir_sign))
|
|
|| (ahrs_view->pitch_sensor > max_angle_cd + start_angle && !is_positive(dir_sign)))
|
|
&& ff_test_phase == 1 ) {
|
|
ff_test_phase = 2;
|
|
attitude_control->reset_target_and_rate(false);
|
|
angle_request_cd.reset(ahrs_view->pitch_sensor);
|
|
attitude_control->input_euler_angle_roll_pitch_euler_rate_yaw(start_angles.x, angle_request_cd.get(), 0.0f);
|
|
} else if (ff_test_phase == 2 ) {
|
|
angle_request_cd.apply(start_angles.y, AP::scheduler().get_loop_period_s());
|
|
attitude_control->input_euler_angle_roll_pitch_euler_rate_yaw(start_angles.x, angle_request_cd.get(), 0.0f);
|
|
phase_out_time--;
|
|
}
|
|
break;
|
|
case YAW:
|
|
gyro_reading = ahrs_view->get_gyro().z;
|
|
command_reading = motors->get_yaw();
|
|
tgt_rate_reading = attitude_control->rate_bf_targets().z;
|
|
if (settle_time > 0) {
|
|
settle_time--;
|
|
trim_command_reading = motors->get_yaw();
|
|
trim_heading = ahrs_view->yaw_sensor;
|
|
rate_request_cds.reset(gyro_reading);
|
|
} else if (((wrap_180_cd(ahrs_view->yaw_sensor - trim_heading) <= 2.0f * max_angle_cd && is_positive(dir_sign))
|
|
|| (wrap_180_cd(ahrs_view->yaw_sensor - trim_heading) >= -2.0f * max_angle_cd && !is_positive(dir_sign)))
|
|
&& ff_test_phase == 0) {
|
|
rate_request_cds.apply(target_rate_cds, AP::scheduler().get_loop_period_s());
|
|
attitude_control->input_rate_bf_roll_pitch_yaw(0.0f, 0.0f, rate_request_cds.get());
|
|
} else if (((wrap_180_cd(ahrs_view->yaw_sensor - trim_heading) > 2.0f * max_angle_cd && is_positive(dir_sign))
|
|
|| (wrap_180_cd(ahrs_view->yaw_sensor - trim_heading) < -2.0f * max_angle_cd && !is_positive(dir_sign)))
|
|
&& ff_test_phase == 0) {
|
|
ff_test_phase = 1;
|
|
rate_request_cds.apply(-target_rate_cds, AP::scheduler().get_loop_period_s());
|
|
attitude_control->input_rate_bf_roll_pitch_yaw(0.0f, 0.0f, rate_request_cds.get());
|
|
attitude_control->rate_bf_yaw_target(rate_request_cds.get());
|
|
} else if (((wrap_180_cd(ahrs_view->yaw_sensor - trim_heading) >= -2.0f * max_angle_cd && is_positive(dir_sign))
|
|
|| (wrap_180_cd(ahrs_view->yaw_sensor - trim_heading) <= 2.0f * max_angle_cd && !is_positive(dir_sign)))
|
|
&& ff_test_phase == 1 ) {
|
|
rate_request_cds.apply(-target_rate_cds, AP::scheduler().get_loop_period_s());
|
|
attitude_control->input_rate_bf_roll_pitch_yaw(0.0f, 0.0f, rate_request_cds.get());
|
|
attitude_control->rate_bf_yaw_target(rate_request_cds.get());
|
|
} else if (((wrap_180_cd(ahrs_view->yaw_sensor - trim_heading) < -2.0f * max_angle_cd && is_positive(dir_sign))
|
|
|| (wrap_180_cd(ahrs_view->yaw_sensor - trim_heading) > 2.0f * max_angle_cd && !is_positive(dir_sign)))
|
|
&& ff_test_phase == 1 ) {
|
|
ff_test_phase = 2;
|
|
attitude_control->reset_yaw_target_and_rate(false);
|
|
angle_request_cd.reset(wrap_180_cd(ahrs_view->yaw_sensor - trim_heading));
|
|
attitude_control->input_euler_angle_roll_pitch_yaw(start_angles.x, start_angles.y, angle_request_cd.get(), false);
|
|
} else if (ff_test_phase == 2 ) {
|
|
angle_request_cd.apply(0.0f, AP::scheduler().get_loop_period_s());
|
|
attitude_control->input_euler_angle_roll_pitch_yaw(start_angles.x, start_angles.y, wrap_360_cd(trim_heading + angle_request_cd.get()), false);
|
|
}
|
|
break;
|
|
}
|
|
|
|
rotation_rate = rotation_rate_filt.apply(gyro_reading,
|
|
AP::scheduler().get_loop_period_s());
|
|
command_out = command_filt.apply((command_reading - trim_command_reading),
|
|
AP::scheduler().get_loop_period_s());
|
|
filt_target_rate = target_rate_filt.apply(tgt_rate_reading,
|
|
AP::scheduler().get_loop_period_s());
|
|
|
|
// record steady state rate and motor command
|
|
switch (axis) {
|
|
case ROLL:
|
|
if (((ahrs_view->roll_sensor >= -max_angle_cd + start_angle && is_positive(dir_sign))
|
|
|| (ahrs_view->roll_sensor <= max_angle_cd + start_angle && !is_positive(dir_sign)))
|
|
&& ff_test_phase == 1 ) {
|
|
test_rate_filt = rotation_rate;
|
|
test_command_filt = command_out;
|
|
test_tgt_rate_filt = filt_target_rate;
|
|
}
|
|
break;
|
|
case PITCH:
|
|
if (((ahrs_view->pitch_sensor >= -max_angle_cd + start_angle && is_positive(dir_sign))
|
|
|| (ahrs_view->pitch_sensor <= max_angle_cd + start_angle && !is_positive(dir_sign)))
|
|
&& ff_test_phase == 1 ) {
|
|
test_rate_filt = rotation_rate;
|
|
test_command_filt = command_out;
|
|
test_tgt_rate_filt = filt_target_rate;
|
|
}
|
|
break;
|
|
case YAW:
|
|
if (((wrap_180_cd(ahrs_view->yaw_sensor - trim_heading) >= -2.0f * max_angle_cd && is_positive(dir_sign))
|
|
|| (wrap_180_cd(ahrs_view->yaw_sensor - trim_heading) <= 2.0f * max_angle_cd && !is_positive(dir_sign)))
|
|
&& ff_test_phase == 1 ) {
|
|
test_rate_filt = rotation_rate;
|
|
test_command_filt = command_out;
|
|
test_tgt_rate_filt = filt_target_rate;
|
|
}
|
|
break;
|
|
}
|
|
if (now - step_start_time_ms >= step_time_limit_ms || (ff_test_phase == 2 && phase_out_time == 0)) {
|
|
// we have passed the maximum stop time
|
|
step = UPDATE_GAINS;
|
|
}
|
|
|
|
}
|
|
|
|
void AC_AutoTune_Heli::dwell_test_init(float start_frq, float filt_freq)
|
|
{
|
|
rotation_rate_filt.reset(0);
|
|
rotation_rate_filt.set_cutoff_frequency(filt_freq);
|
|
command_filt.reset(0);
|
|
command_filt.set_cutoff_frequency(filt_freq);
|
|
target_rate_filt.reset(0);
|
|
target_rate_filt.set_cutoff_frequency(filt_freq);
|
|
filt_target_rate = 0.0f;
|
|
dwell_start_time_ms = 0.0f;
|
|
settle_time = 200;
|
|
if (!is_equal(start_freq, stop_freq)) {
|
|
reset_sweep_variables();
|
|
curr_test_gain = 0.0f;
|
|
curr_test_phase = 0.0f;
|
|
}
|
|
|
|
// filter at lower frequency to remove steady state
|
|
filt_command_reading.set_cutoff_frequency(0.2f * start_frq);
|
|
filt_gyro_reading.set_cutoff_frequency(0.2f * start_frq);
|
|
filt_tgt_rate_reading.set_cutoff_frequency(0.2f * start_frq);
|
|
filt_pit_roll_cd.set_cutoff_frequency(0.2f * start_frq);
|
|
filt_heading_error_cd.set_cutoff_frequency(0.2f * start_frq);
|
|
filt_att_fdbk_from_velxy_cd.set_cutoff_frequency(0.2f * start_frq);
|
|
|
|
// save the trim output from PID controller
|
|
float ff_term = 0.0f;
|
|
float p_term = 0.0f;
|
|
switch (axis) {
|
|
case ROLL:
|
|
trim_meas_rate = ahrs_view->get_gyro().x;
|
|
ff_term = attitude_control->get_rate_roll_pid().get_ff();
|
|
p_term = attitude_control->get_rate_roll_pid().get_p();
|
|
break;
|
|
case PITCH:
|
|
trim_meas_rate = ahrs_view->get_gyro().y;
|
|
ff_term = attitude_control->get_rate_pitch_pid().get_ff();
|
|
p_term = attitude_control->get_rate_pitch_pid().get_p();
|
|
break;
|
|
case YAW:
|
|
trim_meas_rate = ahrs_view->get_gyro().z;
|
|
ff_term = attitude_control->get_rate_yaw_pid().get_ff();
|
|
p_term = attitude_control->get_rate_yaw_pid().get_p();
|
|
break;
|
|
}
|
|
trim_pff_out = ff_term + p_term;
|
|
}
|
|
|
|
void AC_AutoTune_Heli::dwell_test_run(uint8_t freq_resp_input, float start_frq, float stop_frq, float &dwell_gain, float &dwell_phase)
|
|
{
|
|
float gyro_reading = 0.0f;
|
|
float command_reading = 0.0f;
|
|
float tgt_rate_reading = 0.0f;
|
|
float tgt_attitude = 2.5f * 0.01745f;
|
|
const uint32_t now = AP_HAL::millis();
|
|
float target_rate_cds;
|
|
float sweep_time_ms = 23000;
|
|
const float att_hold_gain = 4.5f;
|
|
Vector3f attitude_cd;
|
|
|
|
float dwell_freq = start_frq;
|
|
float cycle_time_ms = 0;
|
|
if (!is_zero(dwell_freq)) {
|
|
cycle_time_ms = 1000.0f * 2.0f * M_PI / dwell_freq;
|
|
}
|
|
|
|
attitude_cd = Vector3f((float)ahrs_view->roll_sensor, (float)ahrs_view->pitch_sensor, (float)ahrs_view->yaw_sensor);
|
|
Vector3f velocity_ned, velocity_bf;
|
|
if (ahrs_view->get_velocity_NED(velocity_ned)) {
|
|
velocity_bf.x = velocity_ned.x * ahrs_view->cos_yaw() + velocity_ned.y * ahrs_view->sin_yaw();
|
|
velocity_bf.y = -velocity_ned.x * ahrs_view->sin_yaw() + velocity_ned.y * ahrs_view->cos_yaw();
|
|
}
|
|
|
|
// keep controller from requesting too high of a rate
|
|
float target_rate_mag_cds = dwell_freq * tgt_attitude * 5730.0f;
|
|
if (target_rate_mag_cds > 5000.0f) {
|
|
target_rate_mag_cds = 5000.0f;
|
|
}
|
|
if (settle_time == 0) {
|
|
// give gentler start for the dwell
|
|
if ((float)(now - dwell_start_time_ms) < 0.5f * cycle_time_ms) {
|
|
target_rate_cds = -0.5f * target_rate_mag_cds * sinf(dwell_freq * (now - dwell_start_time_ms) * 0.001);
|
|
} else {
|
|
if (is_equal(start_frq,stop_frq)) {
|
|
target_rate_cds = - target_rate_mag_cds * cosf(dwell_freq * (now - dwell_start_time_ms - 0.25f * cycle_time_ms) * 0.001);
|
|
} else {
|
|
target_rate_cds = waveform((now - dwell_start_time_ms - 0.5f * cycle_time_ms) * 0.001, (sweep_time_ms - 0.5f * cycle_time_ms) * 0.001f, target_rate_mag_cds, start_frq, stop_frq);
|
|
dwell_freq = waveform_freq_rads;
|
|
}
|
|
}
|
|
filt_pit_roll_cd.apply(Vector2f(attitude_cd.x,attitude_cd.y), AP::scheduler().get_loop_period_s());
|
|
filt_heading_error_cd.apply(wrap_180_cd(trim_attitude_cd.z - attitude_cd.z), AP::scheduler().get_loop_period_s());
|
|
Vector2f att_fdbk = Vector2f(-5730.0f * vel_hold_gain * velocity_bf.y, 5730.0f * vel_hold_gain * velocity_bf.x);
|
|
filt_att_fdbk_from_velxy_cd.apply(att_fdbk, AP::scheduler().get_loop_period_s());
|
|
} else {
|
|
target_rate_cds = 0.0f;
|
|
settle_time--;
|
|
dwell_start_time_ms = now;
|
|
trim_command = command_out;
|
|
trim_attitude_cd = attitude_cd;
|
|
filt_pit_roll_cd.reset(Vector2f(attitude_cd.x,attitude_cd.y));
|
|
filt_heading_error_cd.reset(0.0f);
|
|
filt_att_fdbk_from_velxy_cd.reset(Vector2f(0.0f,0.0f));
|
|
}
|
|
|
|
// limit rate correction for position hold
|
|
Vector3f trim_rate_cds;
|
|
trim_rate_cds.x = att_hold_gain * ((trim_attitude_cd.x + filt_att_fdbk_from_velxy_cd.get().x) - filt_pit_roll_cd.get().x);
|
|
trim_rate_cds.y = att_hold_gain * ((trim_attitude_cd.y + filt_att_fdbk_from_velxy_cd.get().y) - filt_pit_roll_cd.get().y);
|
|
trim_rate_cds.z = att_hold_gain * filt_heading_error_cd.get();
|
|
trim_rate_cds.x = constrain_float(trim_rate_cds.x, -15000.0f, 15000.0f);
|
|
trim_rate_cds.y = constrain_float(trim_rate_cds.y, -15000.0f, 15000.0f);
|
|
trim_rate_cds.z = constrain_float(trim_rate_cds.z, -15000.0f, 15000.0f);
|
|
|
|
switch (axis) {
|
|
case ROLL:
|
|
gyro_reading = ahrs_view->get_gyro().x;
|
|
command_reading = motors->get_roll();
|
|
tgt_rate_reading = attitude_control->rate_bf_targets().x;
|
|
if (settle_time == 0) {
|
|
float ff_rate_contr = 0.0f;
|
|
if (tune_roll_rff > 0.0f) {
|
|
ff_rate_contr = 5730.0f * trim_command / tune_roll_rff;
|
|
}
|
|
trim_rate_cds.x += ff_rate_contr;
|
|
attitude_control->input_rate_bf_roll_pitch_yaw(0.0f, trim_rate_cds.y, 0.0f);
|
|
attitude_control->rate_bf_roll_target(target_rate_cds + trim_rate_cds.x);
|
|
} else {
|
|
attitude_control->input_rate_bf_roll_pitch_yaw(0.0f, 0.0f, 0.0f);
|
|
if (!is_zero(attitude_control->get_rate_roll_pid().ff() + attitude_control->get_rate_roll_pid().kP())) {
|
|
float trim_tgt_rate_cds = 5730.0f * (trim_pff_out + trim_meas_rate * attitude_control->get_rate_roll_pid().kP()) / (attitude_control->get_rate_roll_pid().ff() + attitude_control->get_rate_roll_pid().kP());
|
|
attitude_control->rate_bf_roll_target(trim_tgt_rate_cds);
|
|
}
|
|
}
|
|
break;
|
|
case PITCH:
|
|
gyro_reading = ahrs_view->get_gyro().y;
|
|
command_reading = motors->get_pitch();
|
|
tgt_rate_reading = attitude_control->rate_bf_targets().y;
|
|
if (settle_time == 0) {
|
|
float ff_rate_contr = 0.0f;
|
|
if (tune_pitch_rff > 0.0f) {
|
|
ff_rate_contr = 5730.0f * trim_command / tune_pitch_rff;
|
|
}
|
|
trim_rate_cds.y += ff_rate_contr;
|
|
attitude_control->input_rate_bf_roll_pitch_yaw(trim_rate_cds.x, 0.0f, 0.0f);
|
|
attitude_control->rate_bf_pitch_target(target_rate_cds + trim_rate_cds.y);
|
|
} else {
|
|
attitude_control->input_rate_bf_roll_pitch_yaw(0.0f, 0.0f, 0.0f);
|
|
if (!is_zero(attitude_control->get_rate_pitch_pid().ff() + attitude_control->get_rate_pitch_pid().kP())) {
|
|
float trim_tgt_rate_cds = 5730.0f * (trim_pff_out + trim_meas_rate * attitude_control->get_rate_pitch_pid().kP()) / (attitude_control->get_rate_pitch_pid().ff() + attitude_control->get_rate_pitch_pid().kP());
|
|
attitude_control->rate_bf_pitch_target(trim_tgt_rate_cds);
|
|
}
|
|
}
|
|
break;
|
|
case YAW:
|
|
gyro_reading = ahrs_view->get_gyro().z;
|
|
command_reading = motors->get_yaw();
|
|
tgt_rate_reading = attitude_control->rate_bf_targets().z;
|
|
if (settle_time == 0) {
|
|
float rp_rate_contr = 0.0f;
|
|
if (tune_yaw_rp > 0.0f) {
|
|
rp_rate_contr = 5730.0f * trim_command / tune_yaw_rp;
|
|
}
|
|
trim_rate_cds.z += rp_rate_contr;
|
|
attitude_control->input_rate_bf_roll_pitch_yaw(trim_rate_cds.x, trim_rate_cds.y, 0.0f);
|
|
attitude_control->rate_bf_yaw_target(target_rate_cds + trim_rate_cds.z);
|
|
} else {
|
|
attitude_control->input_rate_bf_roll_pitch_yaw(0.0f, 0.0f, 0.0f);
|
|
if (!is_zero(attitude_control->get_rate_yaw_pid().ff() + attitude_control->get_rate_yaw_pid().kP())) {
|
|
float trim_tgt_rate_cds = 5730.0f * (trim_pff_out + trim_meas_rate * attitude_control->get_rate_yaw_pid().kP()) / (attitude_control->get_rate_yaw_pid().ff() + attitude_control->get_rate_yaw_pid().kP());
|
|
attitude_control->rate_bf_yaw_target(trim_tgt_rate_cds);
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (settle_time == 0) {
|
|
filt_command_reading.apply(command_reading, AP::scheduler().get_loop_period_s());
|
|
filt_gyro_reading.apply(gyro_reading, AP::scheduler().get_loop_period_s());
|
|
filt_tgt_rate_reading.apply(tgt_rate_reading, AP::scheduler().get_loop_period_s());
|
|
} else {
|
|
filt_command_reading.reset(command_reading);
|
|
filt_gyro_reading.reset(gyro_reading);
|
|
filt_tgt_rate_reading.reset(tgt_rate_reading);
|
|
}
|
|
|
|
// looks at gain and phase of input rate to output rate
|
|
rotation_rate = rotation_rate_filt.apply((gyro_reading - filt_gyro_reading.get()),
|
|
AP::scheduler().get_loop_period_s());
|
|
filt_target_rate = target_rate_filt.apply((tgt_rate_reading - filt_tgt_rate_reading.get()),
|
|
AP::scheduler().get_loop_period_s());
|
|
command_out = command_filt.apply((command_reading - filt_command_reading.get()),
|
|
AP::scheduler().get_loop_period_s());
|
|
|
|
// wait for dwell to start before determining gain and phase or just start if sweep
|
|
if ((float)(now - dwell_start_time_ms) > 6.25f * cycle_time_ms || (!is_equal(start_frq,stop_frq) && settle_time == 0)) {
|
|
if (freq_resp_input == 1) {
|
|
freqresp_rate.update(command_out,filt_target_rate,rotation_rate, dwell_freq);
|
|
} else {
|
|
freqresp_rate.update(command_out,command_out,rotation_rate, dwell_freq);
|
|
}
|
|
if (freqresp_rate.is_cycle_complete()) {
|
|
if (!is_equal(start_frq,stop_frq)) {
|
|
curr_test_freq = freqresp_rate.get_freq();
|
|
curr_test_gain = freqresp_rate.get_gain();
|
|
curr_test_phase = freqresp_rate.get_phase();
|
|
// reset cycle_complete to allow indication of next cycle
|
|
freqresp_rate.reset_cycle_complete();
|
|
// log sweep data
|
|
Log_AutoTuneSweep();
|
|
} else {
|
|
dwell_gain = freqresp_rate.get_gain();
|
|
dwell_phase = freqresp_rate.get_phase();
|
|
}
|
|
|
|
}
|
|
}
|
|
|
|
// set sweep data if a frequency sweep is being conducted
|
|
if (!is_equal(start_frq,stop_frq) && (float)(now - dwell_start_time_ms) > 2.5f * cycle_time_ms) {
|
|
// track sweep phase to prevent capturing 180 deg and 270 deg data after phase has wrapped.
|
|
if (curr_test_phase > 180.0f && sweep.progress == 0) {
|
|
sweep.progress = 1;
|
|
} else if (curr_test_phase > 270.0f && sweep.progress == 1) {
|
|
sweep.progress = 2;
|
|
}
|
|
if (curr_test_phase <= 160.0f && curr_test_phase >= 150.0f && sweep.progress == 0) {
|
|
sweep.ph180_freq = curr_test_freq;
|
|
sweep.ph180_gain = curr_test_gain;
|
|
sweep.ph180_phase = curr_test_phase;
|
|
}
|
|
if (curr_test_phase <= 250.0f && curr_test_phase >= 240.0f && sweep.progress == 1) {
|
|
sweep.ph270_freq = curr_test_freq;
|
|
sweep.ph270_gain = curr_test_gain;
|
|
sweep.ph270_phase = curr_test_phase;
|
|
}
|
|
if (curr_test_gain > sweep.maxgain_gain) {
|
|
sweep.maxgain_gain = curr_test_gain;
|
|
sweep.maxgain_freq = curr_test_freq;
|
|
sweep.maxgain_phase = curr_test_phase;
|
|
}
|
|
if (now - step_start_time_ms >= sweep_time_ms + 200) {
|
|
// we have passed the maximum stop time
|
|
step = UPDATE_GAINS;
|
|
}
|
|
|
|
} else {
|
|
if (now - step_start_time_ms >= step_time_limit_ms || freqresp_rate.is_cycle_complete()) {
|
|
// we have passed the maximum stop time
|
|
step = UPDATE_GAINS;
|
|
}
|
|
}
|
|
}
|
|
|
|
void AC_AutoTune_Heli::angle_dwell_test_init(float start_frq, float filt_freq)
|
|
{
|
|
rotation_rate_filt.set_cutoff_frequency(filt_freq);
|
|
command_filt.set_cutoff_frequency(filt_freq);
|
|
target_rate_filt.set_cutoff_frequency(filt_freq);
|
|
dwell_start_time_ms = 0.0f;
|
|
settle_time = 200;
|
|
switch (axis) {
|
|
case ROLL:
|
|
rotation_rate_filt.reset(((float)ahrs_view->roll_sensor) / 5730.0f);
|
|
command_filt.reset(motors->get_roll());
|
|
target_rate_filt.reset(((float)attitude_control->get_att_target_euler_cd().x) / 5730.0f);
|
|
rotation_rate = ((float)ahrs_view->roll_sensor) / 5730.0f;
|
|
command_out = motors->get_roll();
|
|
filt_target_rate = ((float)attitude_control->get_att_target_euler_cd().x) / 5730.0f;
|
|
break;
|
|
case PITCH:
|
|
rotation_rate_filt.reset(((float)ahrs_view->pitch_sensor) / 5730.0f);
|
|
command_filt.reset(motors->get_pitch());
|
|
target_rate_filt.reset(((float)attitude_control->get_att_target_euler_cd().y) / 5730.0f);
|
|
rotation_rate = ((float)ahrs_view->pitch_sensor) / 5730.0f;
|
|
command_out = motors->get_pitch();
|
|
filt_target_rate = ((float)attitude_control->get_att_target_euler_cd().y) / 5730.0f;
|
|
break;
|
|
case YAW:
|
|
// yaw angle will be centered on zero by removing trim heading
|
|
rotation_rate_filt.reset(0.0f);
|
|
command_filt.reset(motors->get_yaw());
|
|
target_rate_filt.reset(0.0f);
|
|
rotation_rate = 0.0f;
|
|
command_out = motors->get_yaw();
|
|
filt_target_rate = 0.0f;
|
|
break;
|
|
}
|
|
|
|
// filter at lower frequency to remove steady state
|
|
filt_command_reading.set_cutoff_frequency(0.2f * start_frq);
|
|
filt_gyro_reading.set_cutoff_frequency(0.2f * start_frq);
|
|
filt_tgt_rate_reading.set_cutoff_frequency(0.2f * start_frq);
|
|
filt_att_fdbk_from_velxy_cd.set_cutoff_frequency(0.2f * start_frq);
|
|
|
|
if (!is_equal(start_freq, stop_freq)) {
|
|
reset_sweep_variables();
|
|
curr_test_gain = 0.0f;
|
|
curr_test_phase = 0.0f;
|
|
}
|
|
}
|
|
|
|
void AC_AutoTune_Heli::angle_dwell_test_run(float start_frq, float stop_frq, float &dwell_gain, float &dwell_phase)
|
|
{
|
|
float gyro_reading = 0.0f;
|
|
float command_reading = 0.0f;
|
|
float tgt_rate_reading = 0.0f;
|
|
float tgt_attitude = 5.0f * 0.01745f;
|
|
const uint32_t now = AP_HAL::millis();
|
|
float target_angle_cd;
|
|
float sweep_time_ms = 23000;
|
|
float dwell_freq = start_frq;
|
|
|
|
// adjust target attitude based on input_tc so amplitude decrease with increased frequency is minimized
|
|
const float freq_co = 1.0f / attitude_control->get_input_tc();
|
|
const float added_ampl = (safe_sqrt(powf(dwell_freq,2.0) + powf(freq_co,2.0)) / freq_co) - 1.0f;
|
|
tgt_attitude = constrain_float(0.08725f * (1.0f + 0.2f * added_ampl), 0.08725f, 0.5235f);
|
|
|
|
float cycle_time_ms = 0;
|
|
if (!is_zero(dwell_freq)) {
|
|
cycle_time_ms = 1000.0f * 6.28f / dwell_freq;
|
|
}
|
|
|
|
// body frame calculation of velocity
|
|
Vector3f velocity_ned, velocity_bf;
|
|
if (ahrs_view->get_velocity_NED(velocity_ned)) {
|
|
velocity_bf.x = velocity_ned.x * ahrs_view->cos_yaw() + velocity_ned.y * ahrs_view->sin_yaw();
|
|
velocity_bf.y = -velocity_ned.x * ahrs_view->sin_yaw() + velocity_ned.y * ahrs_view->cos_yaw();
|
|
}
|
|
|
|
if (settle_time == 0) {
|
|
// give gentler start for the dwell
|
|
if ((float)(now - dwell_start_time_ms) < 0.5f * cycle_time_ms) {
|
|
target_angle_cd = 0.5f * tgt_attitude * 5730.0f * (cosf(dwell_freq * (now - dwell_start_time_ms) * 0.001) - 1.0f);
|
|
} else {
|
|
if (is_equal(start_frq,stop_frq)) {
|
|
target_angle_cd = -tgt_attitude * 5730.0f * sinf(dwell_freq * (now - dwell_start_time_ms - 0.25f * cycle_time_ms) * 0.001);
|
|
} else {
|
|
target_angle_cd = -waveform((now - dwell_start_time_ms - 0.25f * cycle_time_ms) * 0.001, (sweep_time_ms - 0.25f * cycle_time_ms) * 0.001f, tgt_attitude * 5730.0f, start_frq, stop_frq);
|
|
dwell_freq = waveform_freq_rads;
|
|
}
|
|
}
|
|
Vector2f att_fdbk = Vector2f(-5730.0f * vel_hold_gain * velocity_bf.y, 5730.0f * vel_hold_gain * velocity_bf.x);
|
|
filt_att_fdbk_from_velxy_cd.apply(att_fdbk, AP::scheduler().get_loop_period_s());
|
|
} else {
|
|
target_angle_cd = 0.0f;
|
|
trim_yaw_tgt_reading = (float)attitude_control->get_att_target_euler_cd().z;
|
|
trim_yaw_heading_reading = (float)ahrs_view->yaw_sensor;
|
|
settle_time--;
|
|
dwell_start_time_ms = now;
|
|
filt_att_fdbk_from_velxy_cd.reset(Vector2f(0.0f,0.0f));
|
|
}
|
|
|
|
Vector2f trim_angle_cd;
|
|
trim_angle_cd.x = constrain_float(filt_att_fdbk_from_velxy_cd.get().x, -2000.0f, 2000.0f);
|
|
trim_angle_cd.y = constrain_float(filt_att_fdbk_from_velxy_cd.get().y, -2000.0f, 2000.0f);
|
|
switch (axis) {
|
|
case ROLL:
|
|
attitude_control->input_euler_angle_roll_pitch_euler_rate_yaw(target_angle_cd + trim_angle_cd.x, trim_angle_cd.y, 0.0f);
|
|
command_reading = motors->get_roll();
|
|
tgt_rate_reading = ((float)attitude_control->get_att_target_euler_cd().x) / 5730.0f;
|
|
gyro_reading = ((float)ahrs_view->roll_sensor) / 5730.0f;
|
|
break;
|
|
case PITCH:
|
|
attitude_control->input_euler_angle_roll_pitch_euler_rate_yaw(trim_angle_cd.x, target_angle_cd + trim_angle_cd.y, 0.0f);
|
|
command_reading = motors->get_pitch();
|
|
tgt_rate_reading = ((float)attitude_control->get_att_target_euler_cd().y) / 5730.0f;
|
|
gyro_reading = ((float)ahrs_view->pitch_sensor) / 5730.0f;
|
|
break;
|
|
case YAW:
|
|
command_reading = motors->get_yaw();
|
|
tgt_rate_reading = (wrap_180_cd((float)attitude_control->get_att_target_euler_cd().z - trim_yaw_tgt_reading)) / 5730.0f;
|
|
gyro_reading = (wrap_180_cd((float)ahrs_view->yaw_sensor - trim_yaw_heading_reading)) / 5730.0f;
|
|
attitude_control->input_euler_angle_roll_pitch_yaw(trim_angle_cd.x, trim_angle_cd.y, wrap_180_cd(trim_yaw_tgt_reading + target_angle_cd), false);
|
|
break;
|
|
}
|
|
|
|
if (settle_time == 0) {
|
|
filt_command_reading.apply(command_reading, AP::scheduler().get_loop_period_s());
|
|
filt_gyro_reading.apply(gyro_reading, AP::scheduler().get_loop_period_s());
|
|
filt_tgt_rate_reading.apply(tgt_rate_reading, AP::scheduler().get_loop_period_s());
|
|
} else {
|
|
filt_command_reading.reset(command_reading);
|
|
filt_gyro_reading.reset(gyro_reading);
|
|
filt_tgt_rate_reading.reset(tgt_rate_reading);
|
|
}
|
|
|
|
// looks at gain and phase of input rate to output rate
|
|
rotation_rate = rotation_rate_filt.apply((gyro_reading - filt_gyro_reading.get()),
|
|
AP::scheduler().get_loop_period_s());
|
|
filt_target_rate = target_rate_filt.apply((tgt_rate_reading - filt_tgt_rate_reading.get()),
|
|
AP::scheduler().get_loop_period_s());
|
|
command_out = command_filt.apply((command_reading - filt_command_reading.get()),
|
|
AP::scheduler().get_loop_period_s());
|
|
|
|
// wait for dwell to start before determining gain and phase
|
|
if ((float)(now - dwell_start_time_ms) > 6.25f * cycle_time_ms || (!is_equal(start_frq,stop_frq) && settle_time == 0)) {
|
|
freqresp_angle.update(command_out, filt_target_rate, rotation_rate, dwell_freq);
|
|
if (freqresp_angle.is_cycle_complete()) {
|
|
if (!is_equal(start_frq,stop_frq)) {
|
|
curr_test_freq = freqresp_angle.get_freq();
|
|
curr_test_gain = freqresp_angle.get_gain();
|
|
curr_test_phase = freqresp_angle.get_phase();
|
|
test_accel_max = freqresp_angle.get_accel_max();
|
|
// reset cycle_complete to allow indication of next cycle
|
|
freqresp_angle.reset_cycle_complete();
|
|
// log sweep data
|
|
Log_AutoTuneSweep();
|
|
} else {
|
|
dwell_gain = freqresp_angle.get_gain();
|
|
dwell_phase = freqresp_angle.get_phase();
|
|
test_accel_max = freqresp_angle.get_accel_max();
|
|
}
|
|
}
|
|
}
|
|
|
|
// set sweep data if a frequency sweep is being conducted
|
|
if (!is_equal(start_frq,stop_frq)) {
|
|
if (curr_test_phase <= 160.0f && curr_test_phase >= 150.0f) {
|
|
sweep.ph180_freq = curr_test_freq;
|
|
sweep.ph180_gain = curr_test_gain;
|
|
sweep.ph180_phase = curr_test_phase;
|
|
}
|
|
if (curr_test_phase <= 250.0f && curr_test_phase >= 240.0f) {
|
|
sweep.ph270_freq = curr_test_freq;
|
|
sweep.ph270_gain = curr_test_gain;
|
|
sweep.ph270_phase = curr_test_phase;
|
|
}
|
|
if (curr_test_gain > sweep.maxgain_gain) {
|
|
sweep.maxgain_gain = curr_test_gain;
|
|
sweep.maxgain_freq = curr_test_freq;
|
|
sweep.maxgain_phase = curr_test_phase;
|
|
}
|
|
if (now - step_start_time_ms >= sweep_time_ms + 200) {
|
|
// we have passed the maximum stop time
|
|
step = UPDATE_GAINS;
|
|
}
|
|
} else {
|
|
if (now - step_start_time_ms >= step_time_limit_ms || freqresp_angle.is_cycle_complete()) {
|
|
// we have passed the maximum stop time
|
|
step = UPDATE_GAINS;
|
|
}
|
|
}
|
|
}
|
|
|
|
// init_test - initialises the test
|
|
float AC_AutoTune_Heli::waveform(float time, float time_record, float waveform_magnitude, float wMin, float wMax)
|
|
{
|
|
float time_fade_in = 0.0f; // Time to reach maximum amplitude of chirp
|
|
float time_fade_out = 0.1 * time_record; // Time to reach zero amplitude after chirp finishes
|
|
float time_const_freq = 0.0f;
|
|
|
|
float window;
|
|
float output;
|
|
|
|
float B = logf(wMax / wMin);
|
|
|
|
if (time <= 0.0f) {
|
|
window = 0.0f;
|
|
} else if (time <= time_fade_in) {
|
|
window = 0.5 - 0.5 * cosf(M_PI * time / time_fade_in);
|
|
} else if (time <= time_record - time_fade_out) {
|
|
window = 1.0;
|
|
} else if (time <= time_record) {
|
|
window = 0.5 - 0.5 * cosf(M_PI * (time - (time_record - time_fade_out)) / time_fade_out + M_PI);
|
|
} else {
|
|
window = 0.0;
|
|
}
|
|
|
|
if (time <= 0.0f) {
|
|
waveform_freq_rads = wMin;
|
|
output = 0.0f;
|
|
} else if (time <= time_const_freq) {
|
|
waveform_freq_rads = wMin;
|
|
output = window * waveform_magnitude * sinf(wMin * time - wMin * time_const_freq);
|
|
} else if (time <= time_record) {
|
|
waveform_freq_rads = wMin * expf(B * (time - time_const_freq) / (time_record - time_const_freq));
|
|
output = window * waveform_magnitude * sinf((wMin * (time_record - time_const_freq) / B) * (expf(B * (time - time_const_freq) / (time_record - time_const_freq)) - 1));
|
|
} else {
|
|
waveform_freq_rads = wMax;
|
|
output = 0.0f;
|
|
}
|
|
return output;
|
|
}
|
|
|
|
// update gains for the rate p up tune type
|
|
void AC_AutoTune_Heli::updating_rate_p_up_all(AxisType test_axis)
|
|
{
|
|
switch (test_axis) {
|
|
case ROLL:
|
|
updating_rate_p_up(tune_roll_rp, test_freq, test_gain, test_phase, freq_cnt, max_rate_p);
|
|
break;
|
|
case PITCH:
|
|
updating_rate_p_up(tune_pitch_rp, test_freq, test_gain, test_phase, freq_cnt, max_rate_p);
|
|
break;
|
|
case YAW:
|
|
updating_rate_p_up(tune_yaw_rp, test_freq, test_gain, test_phase, freq_cnt, max_rate_p);
|
|
break;
|
|
}
|
|
}
|
|
|
|
// update gains for the rate d up tune type
|
|
void AC_AutoTune_Heli::updating_rate_d_up_all(AxisType test_axis)
|
|
{
|
|
switch (test_axis) {
|
|
case ROLL:
|
|
updating_rate_d_up(tune_roll_rd, test_freq, test_gain, test_phase, freq_cnt, max_rate_d);
|
|
break;
|
|
case PITCH:
|
|
updating_rate_d_up(tune_pitch_rd, test_freq, test_gain, test_phase, freq_cnt, max_rate_d);
|
|
break;
|
|
case YAW:
|
|
updating_rate_d_up(tune_yaw_rd, test_freq, test_gain, test_phase, freq_cnt, max_rate_d);
|
|
break;
|
|
}
|
|
}
|
|
|
|
// update gains for the rate ff up tune type
|
|
void AC_AutoTune_Heli::updating_rate_ff_up_all(AxisType test_axis)
|
|
{
|
|
switch (test_axis) {
|
|
case ROLL:
|
|
updating_rate_ff_up(tune_roll_rff, test_tgt_rate_filt*5730.0f, test_rate_filt*5730.0f, test_command_filt);
|
|
break;
|
|
case PITCH:
|
|
updating_rate_ff_up(tune_pitch_rff, test_tgt_rate_filt*5730.0f, test_rate_filt*5730.0f, test_command_filt);
|
|
break;
|
|
case YAW:
|
|
updating_rate_ff_up(tune_yaw_rff, test_tgt_rate_filt*5730.0f, test_rate_filt*5730.0f, test_command_filt);
|
|
// TODO make FF updating routine determine when to set rff gain to zero based on A/C response
|
|
if (tune_yaw_rff <= AUTOTUNE_RFF_MIN && counter == AUTOTUNE_SUCCESS_COUNT) {
|
|
tune_yaw_rff = 0.0f;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
// update gains for the angle p up tune type
|
|
void AC_AutoTune_Heli::updating_angle_p_up_all(AxisType test_axis)
|
|
{
|
|
switch (test_axis) {
|
|
case ROLL:
|
|
updating_angle_p_up(tune_roll_sp, test_freq, test_gain, test_phase, freq_cnt);
|
|
break;
|
|
case PITCH:
|
|
updating_angle_p_up(tune_pitch_sp, test_freq, test_gain, test_phase, freq_cnt);
|
|
break;
|
|
case YAW:
|
|
updating_angle_p_up(tune_yaw_sp, test_freq, test_gain, test_phase, freq_cnt);
|
|
break;
|
|
}
|
|
}
|
|
|
|
// update gains for the max gain tune type
|
|
void AC_AutoTune_Heli::updating_max_gains_all(AxisType test_axis)
|
|
{
|
|
switch (test_axis) {
|
|
case ROLL:
|
|
updating_max_gains(&test_freq[0], &test_gain[0], &test_phase[0], freq_cnt, max_rate_p, max_rate_d, tune_roll_rp, tune_roll_rd);
|
|
break;
|
|
case PITCH:
|
|
updating_max_gains(&test_freq[0], &test_gain[0], &test_phase[0], freq_cnt, max_rate_p, max_rate_d, tune_pitch_rp, tune_pitch_rd);
|
|
break;
|
|
case YAW:
|
|
updating_max_gains(&test_freq[0], &test_gain[0], &test_phase[0], freq_cnt, max_rate_p, max_rate_d, tune_yaw_rp, tune_yaw_rd);
|
|
// rate P and rate D can be non zero for yaw and need to be included in the max allowed gain
|
|
if (!is_zero(max_rate_p.max_allowed) && counter == AUTOTUNE_SUCCESS_COUNT) {
|
|
max_rate_p.max_allowed += tune_yaw_rp;
|
|
}
|
|
if (!is_zero(max_rate_d.max_allowed) && counter == AUTOTUNE_SUCCESS_COUNT) {
|
|
max_rate_d.max_allowed += tune_yaw_rd;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
// set gains post tune for the tune type
|
|
void AC_AutoTune_Heli::set_gains_post_tune(AxisType test_axis)
|
|
{
|
|
switch (tune_type) {
|
|
case RD_UP:
|
|
switch (test_axis) {
|
|
case ROLL:
|
|
tune_roll_rd = MAX(0.0f, tune_roll_rd * AUTOTUNE_RD_BACKOFF);
|
|
break;
|
|
case PITCH:
|
|
tune_pitch_rd = MAX(0.0f, tune_pitch_rd * AUTOTUNE_RD_BACKOFF);
|
|
break;
|
|
case YAW:
|
|
tune_yaw_rd = MAX(0.0f, tune_yaw_rd * AUTOTUNE_RD_BACKOFF);
|
|
break;
|
|
}
|
|
break;
|
|
case RP_UP:
|
|
switch (test_axis) {
|
|
case ROLL:
|
|
tune_roll_rp = MAX(0.0f, tune_roll_rp * AUTOTUNE_RP_BACKOFF);
|
|
break;
|
|
case PITCH:
|
|
tune_pitch_rp = MAX(0.0f, tune_pitch_rp * AUTOTUNE_RP_BACKOFF);
|
|
break;
|
|
case YAW:
|
|
tune_yaw_rp = MAX(AUTOTUNE_RP_MIN, tune_yaw_rp * AUTOTUNE_RP_BACKOFF);
|
|
break;
|
|
}
|
|
break;
|
|
case SP_UP:
|
|
switch (test_axis) {
|
|
case ROLL:
|
|
tune_roll_sp = MAX(AUTOTUNE_SP_MIN, tune_roll_sp * AUTOTUNE_SP_BACKOFF);
|
|
break;
|
|
case PITCH:
|
|
tune_pitch_sp = MAX(AUTOTUNE_SP_MIN, tune_pitch_sp * AUTOTUNE_SP_BACKOFF);
|
|
break;
|
|
case YAW:
|
|
tune_yaw_sp = MAX(AUTOTUNE_SP_MIN, tune_yaw_sp * AUTOTUNE_SP_BACKOFF);
|
|
break;
|
|
}
|
|
break;
|
|
case RFF_UP:
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
// updating_rate_ff_up - adjust FF to ensure the target is reached
|
|
// FF is adjusted until rate requested is acheived
|
|
void AC_AutoTune_Heli::updating_rate_ff_up(float &tune_ff, float rate_target, float meas_rate, float meas_command)
|
|
{
|
|
|
|
if (ff_up_first_iter) {
|
|
if (!is_zero(meas_rate)) {
|
|
tune_ff = 5730.0f * meas_command / meas_rate;
|
|
}
|
|
tune_ff = constrain_float(tune_ff, AUTOTUNE_RFF_MIN, AUTOTUNE_RFF_MAX);
|
|
ff_up_first_iter = false;
|
|
} else if (is_positive(rate_target * meas_rate) && fabsf(meas_rate) < 1.05f * fabsf(rate_target) &&
|
|
fabsf(meas_rate) > 0.95f * fabsf(rate_target)) {
|
|
if (!first_dir_complete) {
|
|
first_dir_rff = tune_ff;
|
|
first_dir_complete = true;
|
|
positive_direction = !positive_direction;
|
|
} else {
|
|
counter = AUTOTUNE_SUCCESS_COUNT;
|
|
tune_ff = 0.95f * 0.5 * (tune_ff + first_dir_rff);
|
|
tune_ff = constrain_float(tune_ff, AUTOTUNE_RFF_MIN, AUTOTUNE_RFF_MAX);
|
|
}
|
|
} else if (is_positive(rate_target * meas_rate) && fabsf(meas_rate) > 1.05f * fabsf(rate_target)) {
|
|
tune_ff = 0.98f * tune_ff;
|
|
if (tune_ff <= AUTOTUNE_RFF_MIN) {
|
|
tune_ff = AUTOTUNE_RFF_MIN;
|
|
counter = AUTOTUNE_SUCCESS_COUNT;
|
|
AP::logger().Write_Event(LogEvent::AUTOTUNE_REACHED_LIMIT);
|
|
}
|
|
} else if (is_positive(rate_target * meas_rate) && fabsf(meas_rate) < 0.95f * fabsf(rate_target)) {
|
|
tune_ff = 1.02f * tune_ff;
|
|
if (tune_ff >= AUTOTUNE_RFF_MAX) {
|
|
tune_ff = AUTOTUNE_RFF_MAX;
|
|
counter = AUTOTUNE_SUCCESS_COUNT;
|
|
AP::logger().Write_Event(LogEvent::AUTOTUNE_REACHED_LIMIT);
|
|
}
|
|
} else {
|
|
if (!is_zero(meas_rate)) {
|
|
tune_ff = 5730.0f * meas_command / meas_rate;
|
|
}
|
|
tune_ff = constrain_float(tune_ff, AUTOTUNE_RFF_MIN, AUTOTUNE_RFF_MAX);
|
|
}
|
|
}
|
|
|
|
// updating_rate_p_up - uses maximum allowable gain determined from max_gain test to determine rate p gain that does not exceed exceed max response gain
|
|
void AC_AutoTune_Heli::updating_rate_p_up(float &tune_p, float *freq, float *gain, float *phase, uint8_t &frq_cnt, max_gain_data &max_gain_p)
|
|
{
|
|
float test_freq_incr = 0.25f * 3.14159f * 2.0f;
|
|
|
|
if (frq_cnt < 12 && is_equal(start_freq,stop_freq)) {
|
|
if (phase[frq_cnt] <= 180.0f && !is_zero(phase[frq_cnt])) {
|
|
rp_prev_good_frq_cnt = frq_cnt;
|
|
} else if (frq_cnt > 1 && phase[frq_cnt] > phase[frq_cnt-1] + 360.0f && !is_zero(phase[frq_cnt])) {
|
|
if (phase[frq_cnt] - 360.0f < 180.0f) {
|
|
rp_prev_good_frq_cnt = frq_cnt;
|
|
}
|
|
} else if (frq_cnt > 1 && phase[frq_cnt] > 200.0f && !is_zero(phase[frq_cnt])) {
|
|
frq_cnt = 11;
|
|
}
|
|
frq_cnt++;
|
|
if (frq_cnt == 12) {
|
|
freq[frq_cnt] = freq[rp_prev_good_frq_cnt];
|
|
curr_test_freq = freq[frq_cnt];
|
|
} else {
|
|
freq[frq_cnt] = freq[frq_cnt-1] + test_freq_incr;
|
|
curr_test_freq = freq[frq_cnt];
|
|
}
|
|
} else if (is_equal(start_freq,stop_freq)) {
|
|
if (phase[frq_cnt] > 180.0f) {
|
|
curr_test_freq = curr_test_freq - 0.5 * test_freq_incr;
|
|
freq[frq_cnt] = curr_test_freq;
|
|
} else if (phase[frq_cnt] < 160.0f) {
|
|
curr_test_freq = curr_test_freq + 0.5 * test_freq_incr;
|
|
freq[frq_cnt] = curr_test_freq;
|
|
} else if (phase[frq_cnt] <= 180.0f && phase[frq_cnt] >= 160.0f) {
|
|
if (gain[frq_cnt] < max_resp_gain && tune_p < 0.6f * max_gain_p.max_allowed) {
|
|
tune_p += 0.05f * max_gain_p.max_allowed;
|
|
} else {
|
|
counter = AUTOTUNE_SUCCESS_COUNT;
|
|
// reset curr_test_freq and frq_cnt for next test
|
|
curr_test_freq = freq[0];
|
|
frq_cnt = 0;
|
|
tune_p -= 0.05f * max_gain_p.max_allowed;
|
|
tune_p = constrain_float(tune_p,0.0f,0.6f * max_gain_p.max_allowed);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (counter == AUTOTUNE_SUCCESS_COUNT) {
|
|
start_freq = 0.0f; //initializes next test that uses dwell test
|
|
} else {
|
|
start_freq = curr_test_freq;
|
|
stop_freq = curr_test_freq;
|
|
}
|
|
}
|
|
|
|
// updating_rate_d_up - uses maximum allowable gain determined from max_gain test to determine rate d gain where the response gain is at a minimum
|
|
void AC_AutoTune_Heli::updating_rate_d_up(float &tune_d, float *freq, float *gain, float *phase, uint8_t &frq_cnt, max_gain_data &max_gain_d)
|
|
{
|
|
float test_freq_incr = 0.25f * 3.14159f * 2.0f; // set for 1/4 hz increments
|
|
|
|
// frequency sweep was conducted. check to see if freq for 180 deg phase was determined and start there if it was
|
|
if (!is_equal(start_freq,stop_freq)) {
|
|
if (!is_zero(sweep.ph180_freq)) {
|
|
freq[frq_cnt] = sweep.ph180_freq - 0.5f * test_freq_incr;
|
|
frq_cnt = 12;
|
|
freq_cnt_max = frq_cnt;
|
|
} else {
|
|
frq_cnt = 1;
|
|
freq[frq_cnt] = min_sweep_freq;
|
|
}
|
|
curr_test_freq = freq[frq_cnt];
|
|
}
|
|
// if sweep failed to find frequency for 180 phase then use dwell to find frequency
|
|
if (frq_cnt < 12 && is_equal(start_freq,stop_freq)) {
|
|
if (phase[frq_cnt] <= 180.0f && !is_zero(phase[frq_cnt])) {
|
|
rd_prev_good_frq_cnt = frq_cnt;
|
|
} else if (frq_cnt > 1 && phase[frq_cnt] > phase[frq_cnt-1] + 360.0f && !is_zero(phase[frq_cnt])) {
|
|
if (phase[frq_cnt] - 360.0f < 180.0f) {
|
|
rd_prev_good_frq_cnt = frq_cnt;
|
|
}
|
|
} else if (frq_cnt > 1 && phase[frq_cnt] > 200.0f && !is_zero(phase[frq_cnt])) {
|
|
frq_cnt = 11;
|
|
}
|
|
frq_cnt++;
|
|
if (frq_cnt == 12) {
|
|
freq[frq_cnt] = freq[rd_prev_good_frq_cnt];
|
|
curr_test_freq = freq[frq_cnt];
|
|
} else {
|
|
freq[frq_cnt] = freq[frq_cnt-1] + test_freq_incr;
|
|
curr_test_freq = freq[frq_cnt];
|
|
}
|
|
} else if (is_equal(start_freq,stop_freq)) {
|
|
if (phase[frq_cnt] > 180.0f) {
|
|
curr_test_freq = curr_test_freq - 0.5 * test_freq_incr;
|
|
freq[frq_cnt] = curr_test_freq;
|
|
} else if (phase[frq_cnt] < 160.0f) {
|
|
curr_test_freq = curr_test_freq + 0.5 * test_freq_incr;
|
|
freq[frq_cnt] = curr_test_freq;
|
|
} else if (phase[frq_cnt] <= 180.0f && phase[frq_cnt] >= 160.0f) {
|
|
if ((gain[frq_cnt] < rd_prev_gain || is_zero(rd_prev_gain)) && tune_d < 0.6f * max_gain_d.max_allowed) {
|
|
tune_d += 0.05f * max_gain_d.max_allowed;
|
|
rd_prev_gain = gain[frq_cnt];
|
|
} else {
|
|
counter = AUTOTUNE_SUCCESS_COUNT;
|
|
// reset curr_test_freq and frq_cnt for next test
|
|
curr_test_freq = freq[0];
|
|
frq_cnt = 0;
|
|
rd_prev_gain = 0.0f;
|
|
tune_d -= 0.05f * max_gain_d.max_allowed;
|
|
tune_d = constrain_float(tune_d,0.0f,0.6f * max_gain_d.max_allowed);
|
|
}
|
|
}
|
|
}
|
|
if (counter == AUTOTUNE_SUCCESS_COUNT) {
|
|
start_freq = 0.0f; //initializes next test that uses dwell test
|
|
reset_sweep_variables();
|
|
} else {
|
|
start_freq = curr_test_freq;
|
|
stop_freq = curr_test_freq;
|
|
}
|
|
}
|
|
|
|
// updating_angle_p_up - determines maximum angle p gain for pitch and roll
|
|
void AC_AutoTune_Heli::updating_angle_p_up(float &tune_p, float *freq, float *gain, float *phase, uint8_t &frq_cnt)
|
|
{
|
|
float test_freq_incr = 0.5f * 3.14159f * 2.0f;
|
|
float gain_incr = 0.5f;
|
|
|
|
if (!is_equal(start_freq,stop_freq)) {
|
|
if (!is_zero(sweep.maxgain_freq)) {
|
|
frq_cnt = 12;
|
|
freq[frq_cnt] = sweep.maxgain_freq - 0.5f * test_freq_incr;
|
|
freq_cnt_max = frq_cnt;
|
|
} else {
|
|
frq_cnt = 1;
|
|
freq[frq_cnt] = min_sweep_freq;
|
|
freq_cnt_max = 0;
|
|
}
|
|
curr_test_freq = freq[frq_cnt];
|
|
}
|
|
if (freq_cnt < 12 && is_equal(start_freq,stop_freq)) {
|
|
if (gain[freq_cnt] > max_resp_gain && tune_p > AUTOTUNE_SP_MIN) {
|
|
// exceeded max response gain already, reduce tuning gain to remain under max response gain
|
|
tune_p -= gain_incr;
|
|
// force counter to stay on frequency
|
|
freq_cnt -= 1;
|
|
} else if (gain[freq_cnt] > max_resp_gain && tune_p <= AUTOTUNE_SP_MIN) {
|
|
// exceeded max response gain at the minimum allowable tuning gain. terminate testing.
|
|
tune_p = AUTOTUNE_SP_MIN;
|
|
counter = AUTOTUNE_SUCCESS_COUNT;
|
|
AP::logger().Write_Event(LogEvent::AUTOTUNE_REACHED_LIMIT);
|
|
} else if (gain[freq_cnt] > gain[freq_cnt_max]) {
|
|
freq_cnt_max = freq_cnt;
|
|
phase_max = phase[freq_cnt];
|
|
sp_prev_gain = gain[freq_cnt];
|
|
} else if (freq[freq_cnt] > max_sweep_freq || (gain[freq_cnt] > 0.0f && gain[freq_cnt] < 0.5f)) {
|
|
// must be past peak, continue on to determine angle p
|
|
freq_cnt = 11;
|
|
}
|
|
freq_cnt++;
|
|
if (freq_cnt == 12) {
|
|
freq[freq_cnt] = freq[freq_cnt_max];
|
|
curr_test_freq = freq[freq_cnt];
|
|
} else {
|
|
freq[freq_cnt] = freq[freq_cnt-1] + test_freq_incr;
|
|
curr_test_freq = freq[freq_cnt];
|
|
}
|
|
}
|
|
|
|
// once finished with sweep of frequencies, cnt = 12 is used to then tune for max response gain
|
|
if (freq_cnt >= 12 && is_equal(start_freq,stop_freq)) {
|
|
if (gain[freq_cnt] < max_resp_gain && tune_p < AUTOTUNE_SP_MAX && !find_peak) {
|
|
// keep increasing tuning gain unless phase changes or max response gain is acheived
|
|
if (phase[freq_cnt]-phase_max > 20.0f && phase[freq_cnt] < 210.0f) {
|
|
freq[freq_cnt] += 0.5 * test_freq_incr;
|
|
find_peak = true;
|
|
} else {
|
|
tune_p += gain_incr;
|
|
freq[freq_cnt] = freq[freq_cnt_max];
|
|
if (tune_p >= AUTOTUNE_SP_MAX) {
|
|
tune_p = AUTOTUNE_SP_MAX;
|
|
counter = AUTOTUNE_SUCCESS_COUNT;
|
|
AP::logger().Write_Event(LogEvent::AUTOTUNE_REACHED_LIMIT);
|
|
}
|
|
}
|
|
curr_test_freq = freq[freq_cnt];
|
|
sp_prev_gain = gain[freq_cnt];
|
|
} else if (gain[freq_cnt] > 1.1f * max_resp_gain && tune_p > AUTOTUNE_SP_MIN && !find_peak) {
|
|
tune_p -= gain_incr;
|
|
} else if (find_peak) {
|
|
// find the frequency where the response gain is maximum
|
|
if (gain[freq_cnt] > sp_prev_gain) {
|
|
freq[freq_cnt] += 0.5 * test_freq_incr;
|
|
} else {
|
|
find_peak = false;
|
|
phase_max = phase[freq_cnt];
|
|
}
|
|
curr_test_freq = freq[freq_cnt];
|
|
sp_prev_gain = gain[freq_cnt];
|
|
} else {
|
|
// adjust tuning gain so max response gain is not exceeded
|
|
if (sp_prev_gain < max_resp_gain && gain[freq_cnt] > max_resp_gain) {
|
|
float adj_factor = (max_resp_gain - gain[freq_cnt]) / (gain[freq_cnt] - sp_prev_gain);
|
|
tune_p = tune_p + gain_incr * adj_factor;
|
|
}
|
|
counter = AUTOTUNE_SUCCESS_COUNT;
|
|
}
|
|
}
|
|
if (counter == AUTOTUNE_SUCCESS_COUNT) {
|
|
start_freq = 0.0f; //initializes next test that uses dwell test
|
|
reset_sweep_variables();
|
|
curr_test_freq = freq[0];
|
|
freq_cnt = 0;
|
|
} else {
|
|
start_freq = curr_test_freq;
|
|
stop_freq = curr_test_freq;
|
|
}
|
|
}
|
|
|
|
// updating_max_gains: use dwells at increasing frequency to determine gain at which instability will occur
|
|
void AC_AutoTune_Heli::updating_max_gains(float *freq, float *gain, float *phase, uint8_t &frq_cnt, max_gain_data &max_gain_p, max_gain_data &max_gain_d, float &tune_p, float &tune_d)
|
|
{
|
|
float test_freq_incr = 1.0f * M_PI * 2.0f;
|
|
|
|
if (!is_equal(start_freq,stop_freq)) {
|
|
frq_cnt = 2;
|
|
if (!is_zero(sweep.ph180_freq)) {
|
|
freq[frq_cnt] = sweep.ph180_freq - 0.5f * test_freq_incr;
|
|
} else {
|
|
freq[frq_cnt] = min_sweep_freq;
|
|
}
|
|
curr_test_freq = freq[frq_cnt];
|
|
start_freq = curr_test_freq;
|
|
stop_freq = curr_test_freq;
|
|
|
|
} else if (frq_cnt < 12 && is_equal(start_freq,stop_freq)) {
|
|
if (frq_cnt > 2 && phase[frq_cnt] > 161.0f && phase[frq_cnt] < 270.0f &&
|
|
!find_middle && !found_max_p) {
|
|
find_middle = true;
|
|
} else if (find_middle && !found_max_p) {
|
|
if (phase[frq_cnt] > 161.0f) {
|
|
// interpolate between frq_cnt-2 and frq_cnt
|
|
max_gain_p.freq = linear_interpolate(freq[frq_cnt-2],freq[frq_cnt],161.0f,phase[frq_cnt-2],phase[frq_cnt]);
|
|
max_gain_p.gain = linear_interpolate(gain[frq_cnt-2],gain[frq_cnt],161.0f,phase[frq_cnt-2],phase[frq_cnt]);
|
|
} else {
|
|
// interpolate between frq_cnt-1 and frq_cnt
|
|
max_gain_p.freq = linear_interpolate(freq[frq_cnt],freq[frq_cnt-1],161.0f,phase[frq_cnt],phase[frq_cnt-1]);
|
|
max_gain_p.gain = linear_interpolate(gain[frq_cnt],gain[frq_cnt-1],161.0f,phase[frq_cnt],phase[frq_cnt-1]);
|
|
}
|
|
max_gain_p.phase = 161.0f;
|
|
max_gain_p.max_allowed = powf(10.0f,-1 * (log10f(max_gain_p.gain) * 20.0f + 2.42) / 20.0f);
|
|
// limit max gain allowed to be no more than 2x the max p gain limit to keep initial gains bounded
|
|
max_gain_p.max_allowed = constrain_float(max_gain_p.max_allowed, 0.0f, 2.0f * AUTOTUNE_RP_MAX);
|
|
found_max_p = true;
|
|
find_middle = false;
|
|
|
|
if (!is_zero(sweep.ph270_freq)) {
|
|
// set freq cnt back to reinitialize process
|
|
frq_cnt = 1; // set to 1 because it will be incremented
|
|
// set frequency back at least one test_freq_incr as it will be added
|
|
freq[1] = sweep.ph270_freq - 1.5f * test_freq_incr;
|
|
}
|
|
}
|
|
if (frq_cnt > 2 && phase[frq_cnt] > 251.0f && phase[frq_cnt] < 360.0f &&
|
|
!find_middle && !found_max_d && found_max_p) {
|
|
find_middle = true;
|
|
} else if (find_middle && found_max_p && !found_max_d) {
|
|
if (phase[frq_cnt] > 251.0f) {
|
|
// interpolate between frq_cnt-2 and frq_cnt
|
|
max_gain_d.freq = linear_interpolate(freq[frq_cnt-2],freq[frq_cnt],251.0f,phase[frq_cnt-2],phase[frq_cnt]);
|
|
max_gain_d.gain = linear_interpolate(gain[frq_cnt-2],gain[frq_cnt],251.0f,phase[frq_cnt-2],phase[frq_cnt]);
|
|
} else {
|
|
// interpolate between frq_cnt-1 and frq_cnt
|
|
max_gain_d.freq = linear_interpolate(freq[frq_cnt],freq[frq_cnt-1],251.0f,phase[frq_cnt],phase[frq_cnt-1]);
|
|
max_gain_d.gain = linear_interpolate(gain[frq_cnt],gain[frq_cnt-1],251.0f,phase[frq_cnt],phase[frq_cnt-1]);
|
|
}
|
|
max_gain_d.phase = 251.0f;
|
|
max_gain_d.max_allowed = powf(10.0f,-1 * (log10f(max_gain_d.freq * max_gain_d.gain) * 20.0f + 2.42) / 20.0f);
|
|
// limit max gain allowed to be no more than 2x the max d gain limit to keep initial gains bounded
|
|
max_gain_d.max_allowed = constrain_float(max_gain_d.max_allowed, 0.0f, 2.0f * AUTOTUNE_RD_MAX);
|
|
found_max_d = true;
|
|
find_middle = false;
|
|
}
|
|
// stop progression in frequency.
|
|
if ((frq_cnt > 1 && phase[frq_cnt] > 330.0f && !is_zero(phase[frq_cnt])) || found_max_d) {
|
|
frq_cnt = 11;
|
|
}
|
|
frq_cnt++;
|
|
if (frq_cnt == 12) {
|
|
counter = AUTOTUNE_SUCCESS_COUNT;
|
|
// reset variables for next test
|
|
curr_test_freq = freq[0];
|
|
frq_cnt = 0;
|
|
start_freq = 0.0f; //initializes next test that uses dwell test
|
|
reset_sweep_variables();
|
|
} else {
|
|
if (frq_cnt == 3 && phase[2] >= 161.0f && !found_max_p) {
|
|
// phase greater than 161 deg won't allow max p to be found
|
|
// reset freq cnt to 2 and lower dwell freq to push phase below 161 deg
|
|
frq_cnt = 2;
|
|
freq[frq_cnt] = freq[frq_cnt] - 0.5f * test_freq_incr;
|
|
} else if (frq_cnt == 3 && phase[2] >= 251.0f && !found_max_d) {
|
|
// phase greater than 161 deg won't allow max p to be found
|
|
// reset freq cnt to 2 and lower dwell freq to push phase below 161 deg
|
|
frq_cnt = 2;
|
|
freq[frq_cnt] = freq[frq_cnt] - 0.5f * test_freq_incr;
|
|
} else if (find_middle) {
|
|
freq[frq_cnt] = freq[frq_cnt-1] - 0.5f * test_freq_incr;
|
|
} else {
|
|
freq[frq_cnt] = freq[frq_cnt-1] + test_freq_incr;
|
|
}
|
|
curr_test_freq = freq[frq_cnt];
|
|
start_freq = curr_test_freq;
|
|
stop_freq = curr_test_freq;
|
|
}
|
|
}
|
|
if (found_max_p && found_max_d) {
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: Max rate P freq=%f gain=%f", (double)(max_rate_p.freq), (double)(max_rate_p.gain));
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: ph=%f rate_p=%f", (double)(max_rate_p.phase), (double)(max_rate_p.max_allowed));
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: Max Rate D freq=%f gain=%f", (double)(max_rate_d.freq), (double)(max_rate_d.gain));
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTune: ph=%f rate_d=%f", (double)(max_rate_d.phase), (double)(max_rate_d.max_allowed));
|
|
}
|
|
|
|
}
|
|
|
|
// log autotune summary data
|
|
void AC_AutoTune_Heli::Log_AutoTune()
|
|
{
|
|
|
|
switch (axis) {
|
|
case ROLL:
|
|
Log_Write_AutoTune(axis, tune_type, test_freq[freq_cnt], test_gain[freq_cnt], test_phase[freq_cnt], tune_roll_rff, tune_roll_rp, tune_roll_rd, tune_roll_sp, test_accel_max);
|
|
break;
|
|
case PITCH:
|
|
Log_Write_AutoTune(axis, tune_type, test_freq[freq_cnt], test_gain[freq_cnt], test_phase[freq_cnt], tune_pitch_rff, tune_pitch_rp, tune_pitch_rd, tune_pitch_sp, test_accel_max);
|
|
break;
|
|
case YAW:
|
|
Log_Write_AutoTune(axis, tune_type, test_freq[freq_cnt], test_gain[freq_cnt], test_phase[freq_cnt], tune_yaw_rff, tune_yaw_rp, tune_yaw_rd, tune_yaw_sp, test_accel_max);
|
|
break;
|
|
}
|
|
}
|
|
|
|
// log autotune time history results for command, angular rate, and attitude
|
|
void AC_AutoTune_Heli::Log_AutoTuneDetails()
|
|
{
|
|
if (tune_type == SP_UP) {
|
|
Log_Write_AutoTuneDetails(command_out, 0.0f, 0.0f, filt_target_rate, rotation_rate);
|
|
} else {
|
|
Log_Write_AutoTuneDetails(command_out, filt_target_rate, rotation_rate, 0.0f, 0.0f);
|
|
}
|
|
}
|
|
|
|
// log autotune frequency response data
|
|
void AC_AutoTune_Heli::Log_AutoTuneSweep()
|
|
{
|
|
Log_Write_AutoTuneSweep(curr_test_freq, curr_test_gain, curr_test_phase);
|
|
}
|
|
|
|
// @LoggerMessage: ATNH
|
|
// @Description: Heli AutoTune
|
|
// @Vehicles: Copter
|
|
// @Field: TimeUS: Time since system startup
|
|
// @Field: Axis: which axis is currently being tuned
|
|
// @Field: TuneStep: step in autotune process
|
|
// @Field: Freq: target dwell frequency
|
|
// @Field: Gain: measured gain of dwell
|
|
// @Field: Phase: measured phase of dwell
|
|
// @Field: RFF: new rate gain FF term
|
|
// @Field: RP: new rate gain P term
|
|
// @Field: RD: new rate gain D term
|
|
// @Field: SP: new angle P term
|
|
// @Field: ACC: new max accel term
|
|
|
|
// Write an Autotune summary data packet
|
|
void AC_AutoTune_Heli::Log_Write_AutoTune(uint8_t _axis, uint8_t tune_step, float dwell_freq, float meas_gain, float meas_phase, float new_gain_rff, float new_gain_rp, float new_gain_rd, float new_gain_sp, float max_accel)
|
|
{
|
|
AP::logger().Write(
|
|
"ATNH",
|
|
"TimeUS,Axis,TuneStep,Freq,Gain,Phase,RFF,RP,RD,SP,ACC",
|
|
"s--E-d-----",
|
|
"F--000-----",
|
|
"QBBffffffff",
|
|
AP_HAL::micros64(),
|
|
axis,
|
|
tune_step,
|
|
dwell_freq,
|
|
meas_gain,
|
|
meas_phase,
|
|
new_gain_rff,
|
|
new_gain_rp,
|
|
new_gain_rd,
|
|
new_gain_sp,
|
|
max_accel);
|
|
}
|
|
|
|
// Write an Autotune detailed data packet
|
|
void AC_AutoTune_Heli::Log_Write_AutoTuneDetails(float motor_cmd, float tgt_rate_rads, float rate_rads, float tgt_ang_rad, float ang_rad)
|
|
{
|
|
// @LoggerMessage: ATDH
|
|
// @Description: Heli AutoTune data packet
|
|
// @Vehicles: Copter
|
|
// @Field: TimeUS: Time since system startup
|
|
// @Field: Cmd: current motor command
|
|
// @Field: TRate: current target angular rate
|
|
// @Field: Rate: current angular rate
|
|
// @Field: TAng: current target angle
|
|
// @Field: Ang: current angle
|
|
AP::logger().WriteStreaming(
|
|
"ATDH",
|
|
"TimeUS,Cmd,TRate,Rate,TAng,Ang",
|
|
"s-kkdd",
|
|
"F00000",
|
|
"Qfffff",
|
|
AP_HAL::micros64(),
|
|
motor_cmd,
|
|
tgt_rate_rads*57.3,
|
|
rate_rads*57.3f,
|
|
tgt_ang_rad*57.3,
|
|
ang_rad*57.3f);
|
|
}
|
|
|
|
// Write an Autotune frequency response data packet
|
|
void AC_AutoTune_Heli::Log_Write_AutoTuneSweep(float freq, float gain, float phase)
|
|
{
|
|
// @LoggerMessage: ATSH
|
|
// @Description: Heli AutoTune Sweep packet
|
|
// @Vehicles: Copter
|
|
// @Field: TimeUS: Time since system startup
|
|
// @Field: freq: current frequency
|
|
// @Field: gain: current response gain
|
|
// @Field: phase: current response phase
|
|
AP::logger().WriteStreaming(
|
|
"ATSH",
|
|
"TimeUS,freq,gain,phase",
|
|
"sE-d",
|
|
"F000",
|
|
"Qfff",
|
|
AP_HAL::micros64(),
|
|
freq,
|
|
gain,
|
|
phase);
|
|
}
|
|
|
|
// reset the test vaariables for each vehicle
|
|
void AC_AutoTune_Heli::reset_vehicle_test_variables()
|
|
{
|
|
// reset dwell test variables if sweep was interrupted in order to restart sweep
|
|
if (!is_equal(start_freq, stop_freq)) {
|
|
freq_cnt = 0;
|
|
start_freq = 0.0f;
|
|
stop_freq = 0.0f;
|
|
}
|
|
}
|
|
|
|
// reset the update gain variables for heli
|
|
void AC_AutoTune_Heli::reset_update_gain_variables()
|
|
{
|
|
// reset feedforward update gain variables
|
|
ff_up_first_iter = true;
|
|
first_dir_complete = false;
|
|
|
|
// reset max gain variables
|
|
reset_maxgains_update_gain_variables();
|
|
|
|
// reset rd_up variables
|
|
rd_prev_good_frq_cnt = 0;
|
|
rd_prev_gain = 0.0f;
|
|
|
|
// reset rp_up variables
|
|
rp_prev_good_frq_cnt = 0;
|
|
|
|
// reset sp_up variables
|
|
phase_max = 0.0f;
|
|
sp_prev_gain = 0.0f;
|
|
find_peak = false;
|
|
|
|
}
|
|
|
|
// reset the max_gains update gain variables
|
|
void AC_AutoTune_Heli::reset_maxgains_update_gain_variables()
|
|
{
|
|
max_rate_p.freq = 0.0f;
|
|
max_rate_p.gain = 0.0f;
|
|
max_rate_p.phase = 0.0f;
|
|
max_rate_p.max_allowed = 0.0f;
|
|
max_rate_d.freq = 0.0f;
|
|
max_rate_d.gain = 0.0f;
|
|
max_rate_d.phase = 0.0f;
|
|
max_rate_d.max_allowed = 0.0f;
|
|
found_max_p = false;
|
|
found_max_d = false;
|
|
find_middle = false;
|
|
|
|
}
|
|
|
|
// reset the max_gains update gain variables
|
|
void AC_AutoTune_Heli::reset_sweep_variables()
|
|
{
|
|
sweep.ph180_freq = 0.0f;
|
|
sweep.ph180_gain = 0.0f;
|
|
sweep.ph180_phase = 0.0f;
|
|
sweep.ph270_freq = 0.0f;
|
|
sweep.ph270_gain = 0.0f;
|
|
sweep.ph270_phase = 0.0f;
|
|
sweep.maxgain_gain = 0.0f;
|
|
sweep.maxgain_freq = 0.0f;
|
|
sweep.maxgain_phase = 0.0f;
|
|
sweep.progress = 0;
|
|
}
|
|
|
|
// set the tuning test sequence
|
|
void AC_AutoTune_Heli::set_tune_sequence()
|
|
{
|
|
uint8_t seq_cnt = 0;
|
|
|
|
if (seq_bitmask & AUTOTUNE_SEQ_BITMASK_VFF) {
|
|
tune_seq[seq_cnt] = RFF_UP;
|
|
seq_cnt++;
|
|
}
|
|
if (seq_bitmask & AUTOTUNE_SEQ_BITMASK_RATE_D) {
|
|
tune_seq[seq_cnt] = MAX_GAINS;
|
|
seq_cnt++;
|
|
tune_seq[seq_cnt] = RD_UP;
|
|
seq_cnt++;
|
|
tune_seq[seq_cnt] = RP_UP;
|
|
seq_cnt++;
|
|
}
|
|
if (seq_bitmask & AUTOTUNE_SEQ_BITMASK_ANGLE_P) {
|
|
tune_seq[seq_cnt] = SP_UP;
|
|
seq_cnt++;
|
|
}
|
|
if (seq_bitmask & AUTOTUNE_SEQ_BITMASK_MAX_GAIN && !(seq_bitmask & AUTOTUNE_SEQ_BITMASK_RATE_D)) {
|
|
tune_seq[seq_cnt] = MAX_GAINS;
|
|
seq_cnt++;
|
|
}
|
|
tune_seq[seq_cnt] = TUNE_COMPLETE;
|
|
|
|
}
|
|
|
|
// get_testing_step_timeout_ms accessor
|
|
uint32_t AC_AutoTune_Heli::get_testing_step_timeout_ms() const
|
|
{
|
|
return AUTOTUNE_TESTING_STEP_TIMEOUT_MS;
|
|
}
|
|
|
|
// exceeded_freq_range - ensures tuning remains inside frequency range
|
|
bool AC_AutoTune_Heli::exceeded_freq_range(float frequency)
|
|
{
|
|
bool ret = false;
|
|
if (frequency < min_sweep_freq || frequency > max_sweep_freq) {
|
|
ret = true;
|
|
}
|
|
return ret;
|
|
}
|