ardupilot/AntennaTracker/Parameters.cpp

566 lines
22 KiB
C++

#include "Tracker.h"
/*
* AntennaTracker parameter definitions
*
*/
#define GSCALAR(v, name, def) { tracker.g.v.vtype, name, Parameters::k_param_ ## v, &tracker.g.v, {def_value : def} }
#define ASCALAR(v, name, def) { tracker.aparm.v.vtype, name, Parameters::k_param_ ## v, (const void *)&tracker.aparm.v, {def_value : def} }
#define GGROUP(v, name, class) { AP_PARAM_GROUP, name, Parameters::k_param_ ## v, &tracker.g.v, {group_info : class::var_info} }
#define GOBJECT(v, name, class) { AP_PARAM_GROUP, name, Parameters::k_param_ ## v, (const void *)&tracker.v, {group_info : class::var_info} }
#define GOBJECTN(v, pname, name, class) { AP_PARAM_GROUP, name, Parameters::k_param_ ## pname, (const void *)&tracker.v, {group_info : class::var_info} }
const AP_Param::Info Tracker::var_info[] = {
// @Param: FORMAT_VERSION
// @DisplayName: Eeprom format version number
// @Description: This value is incremented when changes are made to the eeprom format
// @User: Advanced
GSCALAR(format_version, "FORMAT_VERSION", 0),
// @Param: SYSID_THISMAV
// @DisplayName: MAVLink system ID of this vehicle
// @Description: Allows setting an individual system id for this vehicle to distinguish it from others on the same network
// @Range: 1 255
// @User: Advanced
GSCALAR(sysid_this_mav, "SYSID_THISMAV", MAV_SYSTEM_ID),
// @Param: SYSID_MYGCS
// @DisplayName: Ground station MAVLink system ID
// @Description: The identifier of the ground station in the MAVLink protocol. Don't change this unless you also modify the ground station to match.
// @Range: 1 255
// @User: Advanced
GSCALAR(sysid_my_gcs, "SYSID_MYGCS", 255),
// @Param: SYSID_TARGET
// @DisplayName: Target vehicle's MAVLink system ID
// @Description: The identifier of the vehicle being tracked. This should be zero (to auto detect) or be the same as the SYSID_THISMAV parameter of the vehicle being tracked.
// @Range: 1 255
// @User: Advanced
GSCALAR(sysid_target, "SYSID_TARGET", 0),
// @Param: YAW_SLEW_TIME
// @DisplayName: Time for yaw to slew through its full range
// @Description: This controls how rapidly the tracker will change the servo output for yaw. It is set as the number of seconds to do a full rotation. You can use this parameter to slow the trackers movements, which may help with some types of trackers. A value of zero will allow for unlimited servo movement per update.
// @Units: s
// @Increment: 0.1
// @Range: 0 20
// @User: Standard
GSCALAR(yaw_slew_time, "YAW_SLEW_TIME", 2),
// @Param: PITCH_SLEW_TIME
// @DisplayName: Time for pitch to slew through its full range
// @Description: This controls how rapidly the tracker will change the servo output for pitch. It is set as the number of seconds to do a full range of pitch movement. You can use this parameter to slow the trackers movements, which may help with some types of trackers. A value of zero will allow for unlimited servo movement per update.
// @Units: s
// @Increment: 0.1
// @Range: 0 20
// @User: Standard
GSCALAR(pitch_slew_time, "PITCH_SLEW_TIME", 2),
// @Param: MIN_REVERSE_TIME
// @DisplayName: Minimum time to apply a yaw reversal
// @Description: When the tracker detects it has reached the limit of servo movement in yaw it will reverse and try moving to the other extreme of yaw. This parameter controls the minimum time it should reverse for. It is used to cope with trackers that have a significant lag in movement to ensure they do move all the way around.
// @Units: s
// @Increment: 1
// @Range: 0 20
// @User: Standard
GSCALAR(min_reverse_time, "MIN_REVERSE_TIME", 1),
// @Param: START_LATITUDE
// @DisplayName: Initial Latitude before GPS lock
// @Description: Combined with START_LONGITUDE this parameter allows for an initial position of the tracker to be set. This position will be used until the GPS gets lock. It can also be used to run a stationary tracker with no GPS attached.
// @Units: deg
// @Increment: 0.000001
// @Range: -90 90
// @User: Standard
GSCALAR(start_latitude, "START_LATITUDE", 0),
// @Param: START_LONGITUDE
// @DisplayName: Initial Longitude before GPS lock
// @Description: Combined with START_LATITUDE this parameter allows for an initial position of the tracker to be set. This position will be used until the GPS gets lock. It can also be used to run a stationary tracker with no GPS attached.
// @Units: deg
// @Increment: 0.000001
// @Range: -180 180
// @User: Standard
GSCALAR(start_longitude, "START_LONGITUDE", 0),
// @Param: STARTUP_DELAY
// @DisplayName: Delay before first servo movement from trim
// @Description: This parameter can be used to force the servos to their trim value for a time on startup. This can help with some servo types
// @Units: s
// @Increment: 0.1
// @Range: 0 10
// @User: Standard
GSCALAR(startup_delay, "STARTUP_DELAY", 0),
// @Param: SERVO_PITCH_TYPE
// @DisplayName: Type of servo system being used for pitch
// @Description: This allows selection of position servos or on/off servos for pitch
// @Values: 0:Position,1:OnOff,2:ContinuousRotation
// @User: Standard
GSCALAR(servo_pitch_type, "SERVO_PITCH_TYPE", SERVO_TYPE_POSITION),
// @Param: SERVO_YAW_TYPE
// @DisplayName: Type of servo system being used for yaw
// @Description: This allows selection of position servos or on/off servos for yaw
// @Values: 0:Position,1:OnOff,2:ContinuousRotation
// @User: Standard
GSCALAR(servo_yaw_type, "SERVO_YAW_TYPE", SERVO_TYPE_POSITION),
// @Param: ONOFF_YAW_RATE
// @DisplayName: Yaw rate for on/off servos
// @Description: Rate of change of yaw in degrees/second for on/off servos
// @Units: deg/s
// @Increment: 0.1
// @Range: 0 50
// @User: Standard
GSCALAR(onoff_yaw_rate, "ONOFF_YAW_RATE", 9.0f),
// @Param: ONOFF_PITCH_RATE
// @DisplayName: Pitch rate for on/off servos
// @Description: Rate of change of pitch in degrees/second for on/off servos
// @Units: deg/s
// @Increment: 0.1
// @Range: 0 50
// @User: Standard
GSCALAR(onoff_pitch_rate, "ONOFF_PITCH_RATE", 1.0f),
// @Param: ONOFF_YAW_MINT
// @DisplayName: Yaw minimum movement time
// @Description: Minimum amount of time in seconds to move in yaw
// @Units: s
// @Increment: 0.01
// @Range: 0 2
// @User: Standard
GSCALAR(onoff_yaw_mintime, "ONOFF_YAW_MINT", 0.1f),
// @Param: ONOFF_PITCH_MINT
// @DisplayName: Pitch minimum movement time
// @Description: Minimim amount of time in seconds to move in pitch
// @Units: s
// @Increment: 0.01
// @Range: 0 2
// @User: Standard
GSCALAR(onoff_pitch_mintime, "ONOFF_PITCH_MINT", 0.1f),
// @Param: YAW_TRIM
// @DisplayName: Yaw trim
// @Description: Amount of extra yaw to add when tracking. This allows for small adjustments for an out of trim compass.
// @Units: deg
// @Increment: 0.1
// @Range: -10 10
// @User: Standard
GSCALAR(yaw_trim, "YAW_TRIM", 0),
// @Param: PITCH_TRIM
// @DisplayName: Pitch trim
// @Description: Amount of extra pitch to add when tracking. This allows for small adjustments for a badly calibrated barometer.
// @Units: deg
// @Increment: 0.1
// @Range: -10 10
// @User: Standard
GSCALAR(pitch_trim, "PITCH_TRIM", 0),
// @Param: YAW_RANGE
// @DisplayName: Yaw Angle Range
// @Description: Yaw axis total range of motion in degrees
// @Units: deg
// @Increment: 0.1
// @Range: 0 360
// @User: Standard
GSCALAR(yaw_range, "YAW_RANGE", YAW_RANGE_DEFAULT),
// @Param: DISTANCE_MIN
// @DisplayName: Distance minimum to target
// @Description: Tracker will track targets at least this distance away
// @Units: m
// @Increment: 1
// @Range: 0 100
// @User: Standard
GSCALAR(distance_min, "DISTANCE_MIN", DISTANCE_MIN_DEFAULT),
// @Param: ALT_SOURCE
// @DisplayName: Altitude Source
// @Description: What provides altitude information for vehicle. Vehicle only assumes tracker has same altitude as vehicle's home
// @Values: 0:Barometer,1:GPS,2:GPS vehicle only
// @User: Standard
GSCALAR(alt_source, "ALT_SOURCE", 0),
// @Param: MAV_UPDATE_RATE
// @DisplayName: Mavlink Update Rate
// @Description: The rate at which Mavlink updates position and baro data
// @Units: Hz
// @Increment: 1
// @Range: 1 10
// @User: Standard
GSCALAR(mavlink_update_rate, "MAV_UPDATE_RATE", 1),
// @Param: PITCH_MIN
// @DisplayName: Minimum Pitch Angle
// @Description: The lowest angle the pitch can reach
// @Units: deg
// @Increment: 1
// @Range: -90 0
// @User: Standard
GSCALAR(pitch_min, "PITCH_MIN", PITCH_MIN_DEFAULT),
// @Param: PITCH_MAX
// @DisplayName: Maximum Pitch Angle
// @Description: The highest angle the pitch can reach
// @Units: deg
// @Increment: 1
// @Range: 0 90
// @User: Standard
GSCALAR(pitch_max, "PITCH_MAX", PITCH_MAX_DEFAULT),
// barometer library
// @Group: BARO
// @Path: ../libraries/AP_Baro/AP_Baro.cpp
GOBJECT(barometer, "BARO", AP_Baro),
// @Group: COMPASS_
// @Path: ../libraries/AP_Compass/AP_Compass.cpp
GOBJECT(compass, "COMPASS_", Compass),
// @Group: SCHED_
// @Path: ../libraries/AP_Scheduler/AP_Scheduler.cpp
GOBJECT(scheduler, "SCHED_", AP_Scheduler),
// @Group: SR0_
// @Path: GCS_Mavlink.cpp
GOBJECTN(_gcs.chan_parameters[0], gcs0, "SR0_", GCS_MAVLINK_Parameters),
#if MAVLINK_COMM_NUM_BUFFERS >= 2
// @Group: SR1_
// @Path: GCS_Mavlink.cpp
GOBJECTN(_gcs.chan_parameters[1], gcs1, "SR1_", GCS_MAVLINK_Parameters),
#endif
#if MAVLINK_COMM_NUM_BUFFERS >= 3
// @Group: SR2_
// @Path: GCS_Mavlink.cpp
GOBJECTN(_gcs.chan_parameters[2], gcs2, "SR2_", GCS_MAVLINK_Parameters),
#endif
#if MAVLINK_COMM_NUM_BUFFERS >= 4
// @Group: SR3_
// @Path: GCS_Mavlink.cpp
GOBJECTN(_gcs.chan_parameters[3], gcs3, "SR3_", GCS_MAVLINK_Parameters),
#endif
#if MAVLINK_COMM_NUM_BUFFERS >= 5
// @Group: SR4_
// @Path: GCS_Mavlink.cpp
GOBJECTN(_gcs.chan_parameters[4], gcs4, "SR4_", GCS_MAVLINK_Parameters),
#endif
#if MAVLINK_COMM_NUM_BUFFERS >= 6
// @Group: SR5_
// @Path: GCS_Mavlink.cpp
GOBJECTN(_gcs.chan_parameters[5], gcs5, "SR5_", GCS_MAVLINK_Parameters),
#endif
#if MAVLINK_COMM_NUM_BUFFERS >= 7
// @Group: SR6_
// @Path: GCS_Mavlink.cpp
GOBJECTN(_gcs.chan_parameters[6], gcs6, "SR6_", GCS_MAVLINK_Parameters),
#endif
// @Param: LOG_BITMASK
// @DisplayName: Log bitmask
// @Description: 4 byte bitmap of log types to enable
// @Bitmask: 0:ATTITUDE,1:GPS,2:RCIN,3:IMU,4:RCOUT,5:COMPASS,6:Battery
// @User: Standard
GSCALAR(log_bitmask, "LOG_BITMASK", DEFAULT_LOG_BITMASK),
// @Group: INS_
// @Path: ../libraries/AP_InertialSensor/AP_InertialSensor.cpp
GOBJECT(ins, "INS_", AP_InertialSensor),
// @Group: AHRS_
// @Path: ../libraries/AP_AHRS/AP_AHRS.cpp
GOBJECT(ahrs, "AHRS_", AP_AHRS),
#if AP_SIM_ENABLED
// @Group: SIM_
// @Path: ../libraries/SITL/SITL.cpp
GOBJECT(sitl, "SIM_", SITL::SIM),
#endif
// @Group: BRD_
// @Path: ../libraries/AP_BoardConfig/AP_BoardConfig.cpp
GOBJECT(BoardConfig, "BRD_", AP_BoardConfig),
#if HAL_MAX_CAN_PROTOCOL_DRIVERS
// @Group: CAN_
// @Path: ../libraries/AP_CANManager/AP_CANManager.cpp
GOBJECT(can_mgr, "CAN_", AP_CANManager),
#endif
// GPS driver
// @Group: GPS
// @Path: ../libraries/AP_GPS/AP_GPS.cpp
GOBJECT(gps, "GPS", AP_GPS),
// @Group: NTF_
// @Path: ../libraries/AP_Notify/AP_Notify.cpp
GOBJECT(notify, "NTF_", AP_Notify),
// @Group: RC
// @Path: ../libraries/RC_Channel/RC_Channels_VarInfo.h
GOBJECT(rc_channels, "RC", RC_Channels_Tracker),
// @Group: SERVO
// @Path: ../libraries/SRV_Channel/SRV_Channels.cpp
GOBJECT(servo_channels, "SERVO", SRV_Channels),
// @Group: SERIAL
// @Path: ../libraries/AP_SerialManager/AP_SerialManager.cpp
GOBJECT(serial_manager, "SERIAL", AP_SerialManager),
// @Param: PITCH2SRV_P
// @DisplayName: Pitch axis controller P gain
// @Description: Pitch axis controller P gain. Converts the difference between desired pitch angle and actual pitch angle into a pitch servo pwm change
// @Range: 0.0 3.0
// @Increment: 0.01
// @User: Standard
// @Param: PITCH2SRV_I
// @DisplayName: Pitch axis controller I gain
// @Description: Pitch axis controller I gain. Corrects long-term difference in desired pitch angle vs actual pitch angle
// @Range: 0.0 3.0
// @Increment: 0.01
// @User: Standard
// @Param: PITCH2SRV_IMAX
// @DisplayName: Pitch axis controller I gain maximum
// @Description: Pitch axis controller I gain maximum. Constrains the maximum pwm change that the I gain will output
// @Range: 0 4000
// @Increment: 10
// @Units: d%
// @User: Standard
// @Param: PITCH2SRV_D
// @DisplayName: Pitch axis controller D gain
// @Description: Pitch axis controller D gain. Compensates for short-term change in desired pitch angle vs actual pitch angle
// @Range: 0.001 0.1
// @Increment: 0.001
// @User: Standard
// @Param: PITCH2SRV_FF
// @DisplayName: Pitch axis controller feed forward
// @Description: Pitch axis controller feed forward
// @Range: 0 0.5
// @Increment: 0.001
// @User: Standard
// @Param: PITCH2SRV_FLTT
// @DisplayName: Pitch axis controller target frequency in Hz
// @Description: Pitch axis controller target frequency in Hz
// @Range: 1 50
// @Increment: 1
// @Units: Hz
// @User: Standard
// @Param: PITCH2SRV_FLTE
// @DisplayName: Pitch axis controller error frequency in Hz
// @Description: Pitch axis controller error frequency in Hz
// @Range: 1 100
// @Increment: 1
// @Units: Hz
// @User: Standard
// @Param: PITCH2SRV_FLTD
// @DisplayName: Pitch axis controller derivative frequency in Hz
// @Description: Pitch axis controller derivative frequency in Hz
// @Range: 1 100
// @Increment: 1
// @Units: Hz
// @User: Standard
// @Param: PITCH2SRV_SMAX
// @DisplayName: Pitch slew rate limit
// @Description: Sets an upper limit on the slew rate produced by the combined P and D gains. If the amplitude of the control action produced by the rate feedback exceeds this value, then the D+P gain is reduced to respect the limit. This limits the amplitude of high frequency oscillations caused by an excessive gain. The limit should be set to no more than 25% of the actuators maximum slew rate to allow for load effects. Note: The gain will not be reduced to less than 10% of the nominal value. A value of zero will disable this feature.
// @Range: 0 200
// @Increment: 0.5
// @User: Advanced
GGROUP(pidPitch2Srv, "PITCH2SRV_", AC_PID),
// @Param: YAW2SRV_P
// @DisplayName: Yaw axis controller P gain
// @Description: Yaw axis controller P gain. Converts the difference between desired yaw angle (heading) and actual yaw angle into a yaw servo pwm change
// @Range: 0.0 3.0
// @Increment: 0.01
// @User: Standard
// @Param: YAW2SRV_I
// @DisplayName: Yaw axis controller I gain
// @Description: Yaw axis controller I gain. Corrects long-term difference in desired yaw angle (heading) vs actual yaw angle
// @Range: 0.0 3.0
// @Increment: 0.01
// @User: Standard
// @Param: YAW2SRV_IMAX
// @DisplayName: Yaw axis controller I gain maximum
// @Description: Yaw axis controller I gain maximum. Constrains the maximum pwm change that the I gain will output
// @Range: 0 4000
// @Increment: 10
// @Units: d%
// @User: Standard
// @Param: YAW2SRV_D
// @DisplayName: Yaw axis controller D gain
// @Description: Yaw axis controller D gain. Compensates for short-term change in desired yaw angle (heading) vs actual yaw angle
// @Range: 0.001 0.1
// @Increment: 0.001
// @User: Standard
// @Param: YAW2SRV_FF
// @DisplayName: Yaw axis controller feed forward
// @Description: Yaw axis controller feed forward
// @Range: 0 0.5
// @Increment: 0.001
// @User: Standard
// @Param: YAW2SRV_FLTT
// @DisplayName: Yaw axis controller target frequency in Hz
// @Description: Yaw axis controller target frequency in Hz
// @Range: 1 50
// @Increment: 1
// @Units: Hz
// @User: Standard
// @Param: YAW2SRV_FLTE
// @DisplayName: Yaw axis controller error frequency in Hz
// @Description: Yaw axis controller error frequency in Hz
// @Range: 1 100
// @Increment: 1
// @Units: Hz
// @User: Standard
// @Param: YAW2SRV_FLTD
// @DisplayName: Yaw axis controller derivative frequency in Hz
// @Description: Yaw axis controller derivative frequency in Hz
// @Range: 1 100
// @Increment: 1
// @Units: Hz
// @User: Standard
// @Param: YAW2SRV_SMAX
// @DisplayName: Yaw slew rate limit
// @Description: Sets an upper limit on the slew rate produced by the combined P and D gains. If the amplitude of the control action produced by the rate feedback exceeds this value, then the D+P gain is reduced to respect the limit. This limits the amplitude of high frequency oscillations caused by an excessive gain. The limit should be set to no more than 25% of the actuators maximum slew rate to allow for load effects. Note: The gain will not be reduced to less than 10% of the nominal value. A value of zero will disable this feature.
// @Range: 0 200
// @Increment: 0.5
// @User: Advanced
GGROUP(pidYaw2Srv, "YAW2SRV_", AC_PID),
#if AP_SCRIPTING_ENABLED
// @Group: SCR_
// @Path: ../libraries/AP_Scripting/AP_Scripting.cpp
GOBJECT(scripting, "SCR_", AP_Scripting),
#endif
// @Param: CMD_TOTAL
// @DisplayName: Number of loaded mission items
// @Description: Set to 1 if HOME location has been loaded by the ground station. Do not change this manually.
// @Range: 1 255
// @User: Advanced
GSCALAR(command_total, "CMD_TOTAL", 0),
// @Group: BATT
// @Path: ../libraries/AP_BattMonitor/AP_BattMonitor.cpp
GOBJECT(battery, "BATT", AP_BattMonitor),
// @Param: GCS_PID_MASK
// @DisplayName: GCS PID tuning mask
// @Description: bitmask of PIDs to send MAVLink PID_TUNING messages for
// @User: Advanced
// @Values: 0:None,1:Pitch,2:Yaw
// @Bitmask: 0:Pitch,1:Yaw
GSCALAR(gcs_pid_mask, "GCS_PID_MASK", 0),
// @Param: SCAN_SPEED_YAW
// @DisplayName: Speed at which to rotate the yaw axis in scan mode
// @Description: This controls how rapidly the tracker will move the servos in SCAN mode
// @Units: deg/s
// @Increment: 1
// @Range: 0 100
// @User: Standard
GSCALAR(scan_speed_yaw, "SCAN_SPEED_YAW", 2),
// @Param: SCAN_SPEED_PIT
// @DisplayName: Speed at which to rotate pitch axis in scan mode
// @Description: This controls how rapidly the tracker will move the servos in SCAN mode
// @Units: deg/s
// @Increment: 1
// @Range: 0 100
// @User: Standard
GSCALAR(scan_speed_pitch, "SCAN_SPEED_PIT", 5),
// @Param: INITIAL_MODE
// @DisplayName: Mode tracker will switch into after initialization
// @Description: 0:MANUAL, 1:STOP, 2:SCAN, 10:AUTO
// @User: Standard
GSCALAR(initial_mode, "INITIAL_MODE", 10),
// @Param: SAFE_DISARM_PWM
// @DisplayName: PWM that will be output when disarmed or in stop mode
// @Description: 0:zero pwm, 1:trim pwm
// @User: Standard
GSCALAR(disarm_pwm, "SAFE_DISARM_PWM", 0),
// @Group: STAT
// @Path: ../libraries/AP_Stats/AP_Stats.cpp
GOBJECT(stats, "STAT", AP_Stats),
// @Param: AUTO_OPTIONS
// @DisplayName: Auto mode options
// @Description: 1: Scan for unknown target
// @User: Standard
// @Values: 0:None, 1: Scan for unknown target in auto mode
// @Bitmask: 0:Scan for unknown target
GSCALAR(auto_opts, "AUTO_OPTIONS", 0),
// @Group:
// @Path: ../libraries/AP_Vehicle/AP_Vehicle.cpp
{ AP_PARAM_GROUP, "", Parameters::k_param_vehicle, (const void *)&tracker, {group_info : AP_Vehicle::var_info} },
// @Group: LOG
// @Path: ../libraries/AP_Logger/AP_Logger.cpp
GOBJECT(logger, "LOG", AP_Logger),
AP_VAREND
};
void Tracker::load_parameters(void)
{
if (!g.format_version.load() ||
g.format_version != Parameters::k_format_version) {
// erase all parameters
hal.console->printf("Firmware change: erasing EEPROM...\n");
StorageManager::erase();
AP_Param::erase_all();
// save the current format version
g.format_version.set_and_save(Parameters::k_format_version);
hal.console->printf("done.\n");
}
g.format_version.set_default(Parameters::k_format_version);
uint32_t before = AP_HAL::micros();
// Load all auto-loaded EEPROM variables
AP_Param::load_all();
hal.console->printf("load_all took %luus\n", (unsigned long)(AP_HAL::micros() - before));
#if HAL_HAVE_SAFETY_SWITCH
// configure safety switch to allow stopping the motors while armed
AP_Param::set_default_by_name("BRD_SAFETYOPTION", AP_BoardConfig::BOARD_SAFETY_OPTION_BUTTON_ACTIVE_SAFETY_OFF|
AP_BoardConfig::BOARD_SAFETY_OPTION_BUTTON_ACTIVE_SAFETY_ON|
AP_BoardConfig::BOARD_SAFETY_OPTION_BUTTON_ACTIVE_ARMED);
#endif
}