mirror of https://github.com/ArduPilot/ardupilot
121 lines
3.5 KiB
Plaintext
121 lines
3.5 KiB
Plaintext
// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
|
|
#if CONFIG_SONAR == ENABLED
|
|
static void init_sonar(void)
|
|
{
|
|
/*
|
|
#if CONFIG_SONAR_SOURCE == SONAR_SOURCE_ADC
|
|
sonar.calculate_scaler(g.sonar_type, 3.3);
|
|
#else
|
|
sonar.calculate_scaler(g.sonar_type, 5.0);
|
|
#endif
|
|
*/
|
|
}
|
|
#endif
|
|
|
|
#if LITE == DISABLED
|
|
// Sensors are not available in HIL_MODE_ATTITUDE
|
|
#if HIL_MODE != HIL_MODE_ATTITUDE
|
|
|
|
void ReadSCP1000(void) {}
|
|
|
|
static void init_barometer(void)
|
|
{
|
|
int flashcount = 0;
|
|
long ground_pressure = 0;
|
|
int ground_temperature;
|
|
|
|
while (ground_pressure == 0 || !barometer.healthy) {
|
|
barometer.read(); // Get initial data from absolute pressure sensor
|
|
ground_pressure = baro_filter.apply(barometer.get_pressure());
|
|
//ground_pressure = barometer.get_pressure();
|
|
ground_temperature = barometer.get_temperature();
|
|
mavlink_delay(20);
|
|
//Serial.printf("barometer.Press %ld\n", barometer.get_pressure());
|
|
}
|
|
|
|
for(int i = 0; i < 30; i++){ // We take some readings...
|
|
|
|
#if HIL_MODE == HIL_MODE_SENSORS
|
|
gcs_update(); // look for inbound hil packets
|
|
#endif
|
|
|
|
do {
|
|
barometer.read(); // Get pressure sensor
|
|
} while (!barometer.healthy);
|
|
ground_pressure = baro_filter.apply(barometer.get_pressure());
|
|
//ground_pressure = (ground_pressure * 9l + barometer.get_pressure()) / 10l;
|
|
ground_temperature = (ground_temperature * 9 + barometer.get_temperature()) / 10;
|
|
|
|
mavlink_delay(20);
|
|
if(flashcount == 5) {
|
|
digitalWrite(C_LED_PIN, LED_OFF);
|
|
digitalWrite(A_LED_PIN, LED_ON);
|
|
digitalWrite(B_LED_PIN, LED_OFF);
|
|
}
|
|
|
|
if(flashcount >= 10) {
|
|
flashcount = 0;
|
|
digitalWrite(C_LED_PIN, LED_ON);
|
|
digitalWrite(A_LED_PIN, LED_OFF);
|
|
digitalWrite(B_LED_PIN, LED_ON);
|
|
}
|
|
flashcount++;
|
|
}
|
|
|
|
g.ground_pressure.set_and_save(ground_pressure);
|
|
g.ground_temperature.set_and_save(ground_temperature / 10.0f);
|
|
abs_pressure = ground_pressure;
|
|
|
|
Serial.printf_P(PSTR("abs_pressure %ld\n"), abs_pressure);
|
|
gcs_send_text_P(SEVERITY_MEDIUM, PSTR("barometer calibration complete."));
|
|
}
|
|
|
|
static int32_t read_barometer(void)
|
|
{
|
|
float x, scaling, temp;
|
|
|
|
barometer.read(); // Get new data from absolute pressure sensor
|
|
float abs_pressure = baro_filter.apply(barometer.get_pressure());
|
|
|
|
//abs_pressure = (abs_pressure + barometer.get_pressure()) >> 1; // Small filtering
|
|
//abs_pressure = ((float)abs_pressure * .7) + ((float)barometer.get_pressure() * .3); // large filtering
|
|
scaling = (float)g.ground_pressure / (float)abs_pressure;
|
|
temp = ((float)g.ground_temperature) + 273.15f;
|
|
x = log(scaling) * temp * 29271.267f;
|
|
return (x / 10);
|
|
}
|
|
|
|
|
|
// in M/S * 100
|
|
static void read_airspeed(void)
|
|
{
|
|
}
|
|
|
|
static void zero_airspeed(void)
|
|
{
|
|
}
|
|
|
|
#endif // HIL_MODE != HIL_MODE_ATTITUDE
|
|
#endif
|
|
|
|
static void read_battery(void)
|
|
{
|
|
if(g.battery_monitoring == 0) {
|
|
battery_voltage1 = 0;
|
|
return;
|
|
}
|
|
|
|
if(g.battery_monitoring == 3 || g.battery_monitoring == 4)
|
|
battery_voltage1 = BATTERY_VOLTAGE(analogRead(BATTERY_PIN_1)) * .1 + battery_voltage1 * .9;
|
|
if(g.battery_monitoring == 4) {
|
|
current_amps1 = CURRENT_AMPS(analogRead(CURRENT_PIN_1)) * .1 + current_amps1 * .9; //reads power sensor current pin
|
|
current_total1 += current_amps1 * (float)delta_ms_medium_loop * 0.0002778; // .0002778 is 1/3600 (conversion to hours)
|
|
}
|
|
|
|
#if BATTERY_EVENT == ENABLED
|
|
if(battery_voltage1 < LOW_VOLTAGE) low_battery_event();
|
|
if(g.battery_monitoring == 4 && current_total1 > g.pack_capacity) low_battery_event();
|
|
#endif
|
|
}
|
|
|