ardupilot/libraries/AP_HAL_ChibiOS/hwdef/sparky2/hwdef-bl.dat

42 lines
751 B
Plaintext

# hw definition file for processing by chibios_pins.py
# for sparky2 bootloader
# MCU class and specific type
MCU STM32F4xx STM32F405xx
# board ID for firmware load
APJ_BOARD_ID 130
# crystal frequency
OSCILLATOR_HZ 8000000
STM32_PLLM_VALUE 8
FLASH_SIZE_KB 1024
# don't allow bootloader to use more than 16k
FLASH_USE_MAX_KB 16
# bootloader is installed at zero offset
FLASH_RESERVE_START_KB 0
# LEDs
PB5 LED_BOOTLOADER OUTPUT LOW
PB4 LED_ACTIVITY OUTPUT LOW
define HAL_LED_ON 0
# the location where the bootloader will put the firmware
define FLASH_BOOTLOADER_LOAD_KB 64
# board voltage
STM32_VDD 330U
# order of UARTs
UART_ORDER OTG1
PA11 OTG_FS_DM OTG1
PA12 OTG_FS_DP OTG1
define HAL_USE_EMPTY_STORAGE 1
define HAL_STORAGE_SIZE 15360