.. |
APM_Config.h
|
Copter: rename ADVANCED_FAILSAFE to AP_COPTER_ADVANCED_FAILSAFE_ENABLED
|
2024-11-12 12:44:34 +11:00 |
AP_Arming.cpp
|
ArduCopter: Update clang pragma to check for the version of clang that introduces the warning
|
2024-11-12 12:41:49 +11:00 |
AP_Arming.h
|
ArduCopter: be more consistent withb our defines around optional features
|
2024-01-09 10:51:55 +11:00 |
AP_ExternalControl_Copter.cpp
|
ArduCopter: enabled sending waypoints from a companion computer to ardupilot for copter and rover
|
2024-05-02 09:08:34 +09:00 |
AP_ExternalControl_Copter.h
|
ArduCopter: enabled sending waypoints from a companion computer to ardupilot for copter and rover
|
2024-05-02 09:08:34 +09:00 |
AP_Rally.cpp
|
ArduCopter: correct logging when rally disabled
|
2023-09-05 22:23:51 +10:00 |
AP_Rally.h
|
ArduCopter: correct logging when rally disabled
|
2023-09-05 22:23:51 +10:00 |
AP_State.cpp
|
ArduCopter: allow compilation with HAL_LOGGING_ENABLED false
|
2024-01-17 18:25:55 +11:00 |
Attitude.cpp
|
Copter: remove whitespace
|
2024-09-26 19:25:33 +10:00 |
Copter.cpp
|
Copter: rename ADVANCED_FAILSAFE to AP_COPTER_ADVANCED_FAILSAFE_ENABLED
|
2024-11-12 12:44:34 +11:00 |
Copter.h
|
Copter: rename ADVANCED_FAILSAFE to AP_COPTER_ADVANCED_FAILSAFE_ENABLED
|
2024-11-12 12:44:34 +11:00 |
GCS_Copter.cpp
|
Copter: `sensor_status_flags` switch to use pos control `is_active` methods for XY and Z flags
|
2024-09-27 07:54:35 +09:00 |
GCS_Copter.h
|
ArduCopter: use NEW_NOTHROW for new(std::nothrow)
|
2024-06-04 09:20:21 +10:00 |
GCS_Mavlink.cpp
|
Copter: rename ADVANCED_FAILSAFE to AP_COPTER_ADVANCED_FAILSAFE_ENABLED
|
2024-11-12 12:44:34 +11:00 |
GCS_Mavlink.h
|
Copter: factor out methods for guided-mode commands
|
2024-04-14 13:19:07 +10:00 |
Log.cpp
|
Copter: log ANG attitude message
|
2024-09-17 10:12:35 +10:00 |
Makefile.waf
|
waf: use single entry point for make wrappers
|
2015-12-10 10:40:34 +09:00 |
Parameters.cpp
|
Copter: reorder initialisation of member variables to make -Werror=reorder work
|
2024-11-13 06:40:37 +11:00 |
Parameters.h
|
Copter: reorder initialisation of member variables to make -Werror=reorder work
|
2024-11-13 06:40:37 +11:00 |
RC_Channel.cpp
|
ArduCopter: remove AUX_FUNC entries based on feature defines
|
2024-09-08 00:55:43 +10:00 |
RC_Channel.h
|
ArduCopter: use AUX_FUNC instead of typedef aux_func_t
|
2024-02-15 08:41:30 +11:00 |
ReleaseNotes.txt
|
Copter: correct release notes
|
2024-11-08 10:48:15 +11:00 |
UserCode.cpp
|
Copter: fix userhook aux switches
|
2021-12-01 07:44:25 +09:00 |
UserParameters.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
UserParameters.h
|
Copter: set paraam default for user parameters
|
2022-12-30 14:40:55 -08:00 |
UserVariables.h
|
Global: remove mode line from headers
|
2016-10-24 09:42:01 -02:00 |
afs_copter.cpp
|
Copter: rename ADVANCED_FAILSAFE to AP_COPTER_ADVANCED_FAILSAFE_ENABLED
|
2024-11-12 12:44:34 +11:00 |
afs_copter.h
|
Copter: rename ADVANCED_FAILSAFE to AP_COPTER_ADVANCED_FAILSAFE_ENABLED
|
2024-11-12 12:44:34 +11:00 |
autoyaw.cpp
|
Copter: Add set_yaw_angle_offset() function to AutoYaw mode
|
2024-10-08 08:05:27 +09:00 |
avoidance.cpp
|
ArduCopter: move AC_Avoidance defines into libraries
|
2024-03-11 18:07:18 +11:00 |
avoidance_adsb.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
avoidance_adsb.h
|
all: use CLASS_NO_COPY() macro
|
2022-10-04 11:23:04 +11:00 |
baro_ground_effect.cpp
|
Copter: INAV rename for neu & cm/cms
|
2021-11-30 10:08:07 +11:00 |
commands.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
compassmot.cpp
|
Copter: send RC_CHANNELS in SITL in compassmot loop
|
2024-04-16 19:14:38 +10:00 |
config.h
|
Copter: rename ADVANCED_FAILSAFE to AP_COPTER_ADVANCED_FAILSAFE_ENABLED
|
2024-11-12 12:44:34 +11:00 |
crash_check.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
defines.h
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
ekf_check.cpp
|
Copter: cleanup EKF failsafe units and division
|
2024-02-14 19:23:24 +09:00 |
esc_calibration.cpp
|
Copter: Change from division to multiplication
|
2022-03-16 18:41:52 +11:00 |
events.cpp
|
Copter: rename ADVANCED_FAILSAFE to AP_COPTER_ADVANCED_FAILSAFE_ENABLED
|
2024-11-12 12:44:34 +11:00 |
failsafe.cpp
|
Copter: rename ADVANCED_FAILSAFE to AP_COPTER_ADVANCED_FAILSAFE_ENABLED
|
2024-11-12 12:44:34 +11:00 |
fence.cpp
|
Copter: address minor review comments
|
2024-07-24 08:24:06 +10:00 |
heli.cpp
|
Copter: Heli: simplify autorotation mode change and support RSC autorotation state
|
2024-10-11 09:54:26 +11:00 |
inertia.cpp
|
ArduCopter: rename AP_AHRS::get_position to get_location
|
2022-01-25 10:47:22 +11:00 |
land_detector.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
landing_gear.cpp
|
ArduCopter: make AP_RANGEFINDER_ENABLED remove more code
|
2024-07-02 09:17:26 +10:00 |
mode.cpp
|
Copter: Heli: simplify autorotation mode change and support RSC autorotation state
|
2024-10-11 09:54:26 +11:00 |
mode.h
|
Copter: rename ADVANCED_FAILSAFE to AP_COPTER_ADVANCED_FAILSAFE_ENABLED
|
2024-11-12 12:44:34 +11:00 |
mode_acro.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
mode_acro_heli.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
mode_althold.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
mode_auto.cpp
|
Copter: Keep FIXED mode when WP_YAW_BEHAVIOR is NONE
|
2024-10-08 08:16:25 +09:00 |
mode_autorotate.cpp
|
Copter: Heli: simplify autorotation mode change and support RSC autorotation state
|
2024-10-11 09:54:26 +11:00 |
mode_autotune.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
mode_avoid_adsb.cpp
|
Copter: change from control_mode to flightmode
|
2021-03-23 22:48:20 +11:00 |
mode_brake.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
mode_circle.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
mode_drift.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
mode_flip.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
mode_flowhold.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
mode_follow.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
mode_guided.cpp
|
Copter: support set_posvelaccel_offset in auto
|
2024-10-04 09:25:56 +09:00 |
mode_guided_nogps.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
mode_land.cpp
|
Copter: disable fences for landing by suppressing in the fence check rather than using a state machine
|
2024-07-24 08:24:06 +10:00 |
mode_loiter.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
mode_poshold.cpp
|
Copter: Use GRAVITY_MSS
|
2024-11-11 16:06:51 +09:00 |
mode_rtl.cpp
|
Copter: RTL path subtracts offsets
|
2024-10-04 09:25:56 +09:00 |
mode_smart_rtl.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
mode_sport.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
mode_stabilize.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
mode_stabilize_heli.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
mode_systemid.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
mode_throw.cpp
|
Copter: support set_posvelaccel_offset in auto
|
2024-10-04 09:25:56 +09:00 |
mode_turtle.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
mode_zigzag.cpp
|
Copter: zigzag uses desired xy instead of actual
|
2024-10-04 09:25:56 +09:00 |
motor_test.cpp
|
Copter: Set the message buffer size to twice the message size
|
2024-09-27 21:33:56 +10:00 |
motors.cpp
|
Copter: rename ADVANCED_FAILSAFE to AP_COPTER_ADVANCED_FAILSAFE_ENABLED
|
2024-11-12 12:44:34 +11:00 |
navigation.cpp
|
Copter: remove unused update_navigation and run_autopilot
|
2021-03-23 10:12:08 +09:00 |
precision_landing.cpp
|
ArduCopter: correct initialisation of PrecLand buffers
|
2024-09-24 10:56:57 +09:00 |
radio.cpp
|
ArduCopter: avoid nullptr dereference on bad rcmap value entry
|
2024-09-10 22:00:50 +10:00 |
sensors.cpp
|
ArduCopter: make AP_RANGEFINDER_ENABLED remove more code
|
2024-07-02 09:17:26 +10:00 |
standby.cpp
|
Copter: Rename set_yaw_target_to_current_heading
|
2021-05-26 16:03:05 +09:00 |
surface_tracking.cpp
|
Copter: support set_posvelaccel_offset in auto
|
2024-10-04 09:25:56 +09:00 |
system.cpp
|
Copter: stop using global ap variable as bitmask
|
2024-11-06 16:31:38 +09:00 |
takeoff.cpp
|
Copter: support set_posvelaccel_offset in auto
|
2024-10-04 09:25:56 +09:00 |
takeoff_check.cpp
|
Copter: Support checking max rpm in the takeoff check
|
2023-05-02 10:23:55 +10:00 |
terrain.cpp
|
ArduCopter: make AP_RANGEFINDER_ENABLED remove more code
|
2024-07-02 09:17:26 +10:00 |
toy_mode.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
toy_mode.h
|
Copter: fix USER_PARAMS_ENABLED includes
|
2023-11-22 18:16:32 +11:00 |
tuning.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
version.h
|
Copter: version to 4.7.0-dev
|
2024-11-06 18:13:45 +11:00 |
wscript
|
Copter: use new surface distance library
|
2024-05-28 09:55:36 +10:00 |