ardupilot/libraries/AP_HAL_ChibiOS
bugobliterator 47dd964e63 AP_HAL_ChibiOS: add init method to take in separate canfd bitrate 2022-03-11 18:13:54 +11:00
..
hwdef AP_HAL_ChibiOS: add hwdef config to enable CANFD support 2022-03-11 18:13:54 +11:00
AP_HAL_ChibiOS.h
AP_HAL_ChibiOS_Namespace.h AP_HAL_ChibiOS: support digital write via IOMCU 2021-09-28 09:40:25 +10:00
AP_HAL_ChibiOS_Private.h
AnalogIn.cpp HAL_ChibiOS: fixed min/max inversion in MCU voltage logging 2022-03-08 11:33:21 +11:00
AnalogIn.h AP_HAL_ChibiOS: AnalogSource: check for valid pin 2021-10-06 18:42:51 +11:00
CANFDIface.cpp AP_HAL_ChibiOS: add init method to take in separate canfd bitrate 2022-03-11 18:13:54 +11:00
CANFDIface.h AP_HAL_ChibiOS: add init method to take in separate canfd bitrate 2022-03-11 18:13:54 +11:00
CANIface.h HAL_ChibiOS: support mavcan message forwarding 2022-02-12 16:36:05 +11:00
CanIface.cpp HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
DSP.cpp HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
DSP.h AP_HAL_ChibiOS: remove redundant harmonics from DSP 2021-12-22 18:13:38 +11:00
Device.cpp HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
Device.h
EventSource.cpp AP_HAL_ChibiOS: hwdef for SPRacingH7 2022-02-09 12:47:55 +00:00
EventSource.h
Flash.h
GPIO.cpp HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
GPIO.h HAL_ChibiOS: support GPIO get_mode and set_mode 2021-10-12 15:47:51 +11:00
HAL_ChibiOS_Class.cpp AP_HAL_ChibiOS: allow flash to be write-protected/unprotected on reboot 2022-02-24 10:19:07 +11:00
HAL_ChibiOS_Class.h HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
I2CDevice.cpp HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
I2CDevice.h AP_HAL_ChibiOS: add support for CAN/I2C switch 2022-02-16 13:25:58 +11:00
QSPIDevice.cpp HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
QSPIDevice.h
RCInput.cpp HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
RCInput.h
RCOutput.cpp AP_HAL_ChibiOS: ensure chan_offset is initialized before using it 2022-02-23 18:35:43 +11:00
RCOutput.h AP_HAL_ChibiOS: add support for @SYS/timers.txt 2022-02-16 15:28:04 +11:00
RCOutput_bdshot.cpp HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
RCOutput_serial.cpp HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
SPIDevice.cpp HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
SPIDevice.h
Scheduler.cpp HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
Scheduler.h
Semaphores.cpp HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
Semaphores.h
SoftSigReader.cpp HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
SoftSigReader.h
SoftSigReaderInt.cpp HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
SoftSigReaderInt.h
Storage.cpp AP_HAL_ChibiOS: hwdef for SPRacingH7 2022-02-09 12:47:55 +00:00
Storage.h AP_HAL_ChibiOS: only change SD card on external flash boards 2022-02-09 12:47:55 +00:00
UARTDriver.cpp HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
UARTDriver.h AP_HAL_ChibiOS: add HAL_UART_STATS_ENABLED to disable stats gathering 2022-01-12 18:30:49 +11:00
Util.cpp AP_HAL_ChibiOS: add support for alternate alarm PWM group 2022-02-23 18:35:43 +11:00
Util.h AP_HAL_ChibiOS: add support for alternate alarm PWM group 2022-02-23 18:35:43 +11:00
bxcan.hpp
sdcard.cpp HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
sdcard.h
shared_dma.cpp HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
shared_dma.h
stdio.cpp
system.cpp AP_HAL_ChibiOS: hwdef for SPRacingH7 2022-02-09 12:47:55 +00:00