ardupilot/Tools/Frame_params/Solo_Copter-3.5_GreenCube.param
Matt 5d000613a5 Frame_params: Update Solo's required parameters
Adds Solo parameter files for  Copter 3.7 on both Cube Black and Cube
Green.  Updates the file names for the existing Solo Copter 3.6 and
Copter 3.5 parameter files.  The 3.7 files are now referenced by the
Solo's ChibiOS hwdef files.
2018-12-04 12:54:55 +09:00

135 lines
2.2 KiB
Plaintext

# 3DR Solo with Green Cube on Copter 3.5 only
ACCEL_Z_I,1.5
ACCEL_Z_P,0.75
ACRO_RP_P,4
ACRO_THR_MID,0.4
ACRO_YAW_P,1
AHRS_ORIENTATION,12
ANGLE_MAX,2000
ARMING_CHECK,7166
ATC_ACCEL_P_MAX,36000
ATC_ACCEL_R_MAX,36000
ATC_ACCEL_Y_MAX,7000
ATC_ANG_PIT_P,10
ATC_ANG_RLL_P,9
ATC_ANG_YAW_P,7
ATC_RAT_PIT_D,0.006
ATC_RAT_PIT_IMAX,0.444
ATC_RAT_PIT_P,0.167
ATC_RAT_RLL_D,0.005
ATC_RAT_RLL_I,0.12
ATC_RAT_RLL_IMAX,0.444
ATC_RAT_RLL_P,0.086
ATC_RAT_YAW_FILT,5
ATC_RAT_YAW_I,0.061
ATC_RAT_YAW_IMAX,0.222
ATC_RAT_YAW_P,0.617
ATC_SLEW_YAW,8000
BATT_CAPACITY,5200
BATT_MONITOR,5
BATT_SERIAL_NUM,0
BRD_IMU_TARGTEMP,45
BRD_SAFETY_MASK,16368
BRD_SAFETYENABLE,0
BRD_SER1_RTSCTS,1
CIRCLE_RADIUS,3000
COMPASS_ORIENT,38
COMPASS_ORIENT2,0
COMPASS_ORIENT3,0
COMPASS_PRIMARY,0
COMPASS_TYPEMASK,15392
COMPASS_USE,1
COMPASS_USE2,1
COMPASS_USE3,0
DISARM_DELAY,8
FENCE_ACTION,0
FENCE_ALT_MAX,122
FENCE_ENABLE,1
FENCE_RADIUS,0
FENCE_TYPE,1
FLTMODE1,5
FLTMODE2,5
FLTMODE3,5
FLTMODE4,5
FLTMODE5,5
FLTMODE6,5
FRAME_CLASS,1
FRAME_TYPE,1
FS_BATT_ENABLE,2
FS_BATT_MAH,520
FS_BATT_VOLTAGE,14
FS_EKF_ACTION,2
FS_THR_VALUE,950
GND_EFFECT_COMP,1
GPS_HDOP_GOOD,200
GPS_NAVFILTER,6
INS_ACC_BODYFIX,3
INS_FAST_SAMPLE,3
INS_TRIM_OPTION,2
LAND_SPEED,45
LAND_SPEED_HIGH,220
LOG_BACKEND_TYPE,3
LOG_DISARMED,1
LOG_FILE_BUFSIZE,32
LOG_FILE_DSRMROT,1
MNT_ANGMAX_TIL,0
MNT_ANGMIN_TIL,-9000
MNT_RC_IN_TILT,6
MNT_TYPE,2
MOT_BAT_CURR_MAX,50
MOT_BAT_VOLT_MAX,16.8
MOT_BAT_VOLT_MIN,12
MOT_PWM_MAX,1869
MOT_PWM_MIN,1000
MOT_SPIN_ARM,0.08
MOT_SPIN_MIN,0.12
MOT_SPOOL_TIME,1
MOT_THST_EXPO,0.8
NTF_OREO_THEME,1
PHLD_BRAKE_ANGLE,2000
PHLD_BRAKE_RATE,6
PILOT_ACCEL_Z,100
PILOT_THR_BHV,7
PILOT_THR_FILT,2
PILOT_TKOFF_ALT,214
PILOT_TKOFF_DZ,250
PILOT_VELZ_MAX,133
RC_FEEL_RP,20
RC1_DZ,20
RC1_MAX,2000
RC1_MIN,1000
RC2_DZ,20
RC2_MAX,2000
RC2_MIN,1000
RC3_MAX,1890
RC3_MIN,1008
RC3_TRIM,1450
RC4_DZ,20
RC4_MAX,2000
RC4_MIN,1000
RC6_MAX,1520
RC6_MIN,1000
RC6_TRIM,1000
RC7_MAX,2000
RC7_MIN,1000
RTL_ALT,4500
RTL_CLIMB_MIN,1000
RTL_SPEED,900
SERIAL1_BAUD,921
SERIAL4_BAUD,230
SERIAL4_PROTOCOL,1
SERVO1_FUNCTION,33
SERVO2_FUNCTION,34
SERVO3_FUNCTION,35
SERVO4_FUNCTION,36
SR3_PARAMS,10
TERRAIN_SPACING,30
THR_DZ,10
VEL_XY_P,1.4
WP_YAW_BEHAVIOR,3
WPNAV_LOIT_MAXA,229
WPNAV_LOIT_MINA,108
WPNAV_SPEED,300
WPNAV_SPEED_DN,240
WPNAV_SPEED_UP,320