mirror of https://github.com/ArduPilot/ardupilot
40 lines
2.1 KiB
XML
40 lines
2.1 KiB
XML
<?xml version='1.0'?>
|
|
<mavlink>
|
|
<include>common.xml</include>
|
|
<!-- note that APM specific messages should use the command id
|
|
range from 150 to 250, to leave plenty of room for growth
|
|
of common.xml
|
|
|
|
If you prototype a message here, then you should consider if it
|
|
is general enough to move into common.xml later
|
|
-->
|
|
<messages>
|
|
<message id="150" name="SENSOR_OFFSETS">
|
|
<description>Offsets and calibrations values for hardware
|
|
sensors. This makes it easier to debug the calibration process.</description>
|
|
<field type="int16_t" name="mag_ofs_x">magnetometer X offset</field>
|
|
<field type="int16_t" name="mag_ofs_y">magnetometer Y offset</field>
|
|
<field type="int16_t" name="mag_ofs_z">magnetometer Z offset</field>
|
|
<field type="float" name="mag_declination">magnetic declination (radians)</field>
|
|
<field type="int32_t" name="raw_press">raw pressure from barometer</field>
|
|
<field type="int32_t" name="raw_temp">raw temperature from barometer</field>
|
|
<field type="float" name="gyro_cal_x">gyro X calibration</field>
|
|
<field type="float" name="gyro_cal_y">gyro Y calibration</field>
|
|
<field type="float" name="gyro_cal_z">gyro Z calibration</field>
|
|
<field type="float" name="accel_cal_x">accel X calibration</field>
|
|
<field type="float" name="accel_cal_y">accel Y calibration</field>
|
|
<field type="float" name="accel_cal_z">accel Z calibration</field>
|
|
</message>
|
|
|
|
<message id="151" name="SET_MAG_OFFSETS">
|
|
<description>set the magnetometer offsets</description>
|
|
<field type="uint8_t" name="target_system">System ID</field>
|
|
<field type="uint8_t" name="target_component">Component ID</field>
|
|
<field type="int16_t" name="mag_ofs_x">magnetometer X offset</field>
|
|
<field type="int16_t" name="mag_ofs_y">magnetometer Y offset</field>
|
|
<field type="int16_t" name="mag_ofs_z">magnetometer Z offset</field>
|
|
</message>
|
|
|
|
</messages>
|
|
</mavlink>
|