ardupilot/ArduPlane/navigation.cpp

316 lines
11 KiB
C++

#include "Plane.h"
// set the nav_controller pointer to the right controller
void Plane::set_nav_controller(void)
{
switch ((AP_Navigation::ControllerType)g.nav_controller.get()) {
default:
case AP_Navigation::CONTROLLER_DEFAULT:
// no break, fall through to L1 as default controller
case AP_Navigation::CONTROLLER_L1:
nav_controller = &L1_controller;
break;
}
}
/*
reset the total loiter angle
*/
void Plane::loiter_angle_reset(void)
{
loiter.sum_cd = 0;
loiter.total_cd = 0;
loiter.reached_target_alt = false;
loiter.unable_to_acheive_target_alt = false;
}
/*
update the total angle we have covered in a loiter. Used to support
commands to do N circles of loiter
*/
void Plane::loiter_angle_update(void)
{
static const int32_t lap_check_interval_cd = 3*36000;
const int32_t target_bearing_cd = nav_controller->target_bearing_cd();
int32_t loiter_delta_cd;
if (loiter.sum_cd == 0 && !reached_loiter_target()) {
// we don't start summing until we are doing the real loiter
loiter_delta_cd = 0;
} else if (loiter.sum_cd == 0) {
// use 1 cd for initial delta
loiter_delta_cd = 1;
loiter.start_lap_alt_cm = current_loc.alt;
loiter.next_sum_lap_cd = lap_check_interval_cd;
} else {
loiter_delta_cd = target_bearing_cd - loiter.old_target_bearing_cd;
}
loiter.old_target_bearing_cd = target_bearing_cd;
loiter_delta_cd = wrap_180_cd(loiter_delta_cd);
loiter.sum_cd += loiter_delta_cd * loiter.direction;
if (labs(current_loc.alt - next_WP_loc.alt) < 500) {
loiter.reached_target_alt = true;
loiter.unable_to_acheive_target_alt = false;
loiter.next_sum_lap_cd = loiter.sum_cd + lap_check_interval_cd;
} else if (!loiter.reached_target_alt && labs(loiter.sum_cd) >= loiter.next_sum_lap_cd) {
// check every few laps for scenario where up/downdrafts inhibit you from loitering up/down for too long
loiter.unable_to_acheive_target_alt = labs(current_loc.alt - loiter.start_lap_alt_cm) < 500;
loiter.start_lap_alt_cm = current_loc.alt;
loiter.next_sum_lap_cd += lap_check_interval_cd;
}
}
//****************************************************************
// Function that will calculate the desired direction to fly and distance
//****************************************************************
void Plane::navigate()
{
// allow change of nav controller mid-flight
set_nav_controller();
// do not navigate with corrupt data
// ---------------------------------
if (!have_position) {
return;
}
if (next_WP_loc.lat == 0 && next_WP_loc.lng == 0) {
return;
}
// waypoint distance from plane
// ----------------------------
auto_state.wp_distance = get_distance(current_loc, next_WP_loc);
auto_state.wp_proportion = location_path_proportion(current_loc,
prev_WP_loc, next_WP_loc);
SpdHgt_Controller->set_path_proportion(auto_state.wp_proportion);
// update total loiter angle
loiter_angle_update();
// control mode specific updates to navigation demands
// ---------------------------------------------------
update_navigation();
}
void Plane::calc_airspeed_errors()
{
float airspeed_measured_cm = airspeed.get_airspeed_cm();
// FBW_B airspeed target
if (control_mode == FLY_BY_WIRE_B ||
control_mode == CRUISE) {
target_airspeed_cm = ((int32_t)(aparm.airspeed_max -
aparm.airspeed_min) *
channel_throttle->get_control_in()) +
((int32_t)aparm.airspeed_min * 100);
} else if (flight_stage == AP_Vehicle::FixedWing::FLIGHT_LAND) {
// Landing airspeed target
target_airspeed_cm = landing.get_target_airspeed_cm();
} else {
// Normal airspeed target
target_airspeed_cm = aparm.airspeed_cruise_cm;
}
// Set target to current airspeed + ground speed undershoot,
// but only when this is faster than the target airspeed commanded
// above.
if (control_mode >= FLY_BY_WIRE_B && (aparm.min_gndspeed_cm > 0)) {
int32_t min_gnd_target_airspeed = airspeed_measured_cm + groundspeed_undershoot;
if (min_gnd_target_airspeed > target_airspeed_cm)
target_airspeed_cm = min_gnd_target_airspeed;
}
// Bump up the target airspeed based on throttle nudging
if (control_mode >= AUTO && airspeed_nudge_cm > 0) {
target_airspeed_cm += airspeed_nudge_cm;
}
// Apply airspeed limit
if (target_airspeed_cm > (aparm.airspeed_max * 100))
target_airspeed_cm = (aparm.airspeed_max * 100);
// use the TECS view of the target airspeed for reporting, to take
// account of the landing speed
airspeed_error = SpdHgt_Controller->get_target_airspeed() - airspeed_measured_cm * 0.01f;
}
void Plane::calc_gndspeed_undershoot()
{
// Use the component of ground speed in the forward direction
// This prevents flyaway if wind takes plane backwards
if (gps.status() >= AP_GPS::GPS_OK_FIX_2D) {
Vector2f gndVel = ahrs.groundspeed_vector();
const Matrix3f &rotMat = ahrs.get_rotation_body_to_ned();
Vector2f yawVect = Vector2f(rotMat.a.x,rotMat.b.x);
yawVect.normalize();
float gndSpdFwd = yawVect * gndVel;
groundspeed_undershoot = (aparm.min_gndspeed_cm > 0) ? (aparm.min_gndspeed_cm - gndSpdFwd*100) : 0;
}
}
void Plane::update_loiter(uint16_t radius)
{
if (radius <= 1) {
// if radius is <=1 then use the general loiter radius. if it's small, use default
radius = (abs(aparm.loiter_radius) <= 1) ? LOITER_RADIUS_DEFAULT : abs(aparm.loiter_radius);
if (next_WP_loc.flags.loiter_ccw == 1) {
loiter.direction = -1;
} else {
loiter.direction = (aparm.loiter_radius < 0) ? -1 : 1;
}
}
if (loiter.start_time_ms != 0 &&
quadplane.guided_mode_enabled()) {
if (!auto_state.vtol_loiter) {
auto_state.vtol_loiter = true;
// reset loiter start time, so we don't consider the point
// reached till we get much closer
loiter.start_time_ms = 0;
quadplane.guided_start();
}
} else if (loiter.start_time_ms == 0 &&
control_mode == AUTO &&
!auto_state.no_crosstrack &&
get_distance(current_loc, next_WP_loc) > radius*3) {
// if never reached loiter point and using crosstrack and somewhat far away from loiter point
// navigate to it like in auto-mode for normal crosstrack behavior
nav_controller->update_waypoint(prev_WP_loc, next_WP_loc);
} else {
nav_controller->update_loiter(next_WP_loc, radius, loiter.direction);
}
if (loiter.start_time_ms == 0) {
if (reached_loiter_target() ||
auto_state.wp_proportion > 1) {
// we've reached the target, start the timer
loiter.start_time_ms = millis();
if (control_mode == GUIDED || control_mode == AVOID_ADSB) {
// starting a loiter in GUIDED means we just reached the target point
gcs().send_mission_item_reached_message(0);
}
if (quadplane.guided_mode_enabled()) {
quadplane.guided_start();
}
}
}
}
/*
handle CRUISE mode, locking heading to GPS course when we have
sufficient ground speed, and no aileron or rudder input
*/
void Plane::update_cruise()
{
if (!cruise_state.locked_heading &&
channel_roll->get_control_in() == 0 &&
rudder_input == 0 &&
gps.status() >= AP_GPS::GPS_OK_FIX_2D &&
gps.ground_speed() >= 3 &&
cruise_state.lock_timer_ms == 0) {
// user wants to lock the heading - start the timer
cruise_state.lock_timer_ms = millis();
}
if (cruise_state.lock_timer_ms != 0 &&
(millis() - cruise_state.lock_timer_ms) > 500) {
// lock the heading after 0.5 seconds of zero heading input
// from user
cruise_state.locked_heading = true;
cruise_state.lock_timer_ms = 0;
cruise_state.locked_heading_cd = gps.ground_course_cd();
prev_WP_loc = current_loc;
}
if (cruise_state.locked_heading) {
next_WP_loc = prev_WP_loc;
// always look 1km ahead
location_update(next_WP_loc,
cruise_state.locked_heading_cd*0.01f,
get_distance(prev_WP_loc, current_loc) + 1000);
nav_controller->update_waypoint(prev_WP_loc, next_WP_loc);
}
}
/*
handle speed and height control in FBWB or CRUISE mode.
In this mode the elevator is used to change target altitude. The
throttle is used to change target airspeed or throttle
*/
void Plane::update_fbwb_speed_height(void)
{
uint32_t now = micros();
if (now - target_altitude.last_elev_check_us >= 100000) {
// we don't run this on every loop as it would give too small granularity on quadplanes at 300Hz, and
// give below 1cm altitude change, which would result in no climb or descent
float dt = (now - target_altitude.last_elev_check_us) * 1.0e-6;
dt = constrain_float(dt, 0.1, 0.15);
target_altitude.last_elev_check_us = now;
float elevator_input = channel_pitch->get_control_in() / 4500.0f;
if (g.flybywire_elev_reverse) {
elevator_input = -elevator_input;
}
int32_t alt_change_cm = g.flybywire_climb_rate * elevator_input * dt * 100;
change_target_altitude(alt_change_cm);
if (is_zero(elevator_input) && !is_zero(target_altitude.last_elevator_input)) {
// the user has just released the elevator, lock in
// the current altitude
set_target_altitude_current();
}
target_altitude.last_elevator_input = elevator_input;
}
// check for FBWB altitude limit
check_minimum_altitude();
altitude_error_cm = calc_altitude_error_cm();
calc_throttle();
calc_nav_pitch();
}
/*
calculate the turn angle for the next leg of the mission
*/
void Plane::setup_turn_angle(void)
{
int32_t next_ground_course_cd = mission.get_next_ground_course_cd(-1);
if (next_ground_course_cd == -1) {
// the mission library can't determine a turn angle, assume 90 degrees
auto_state.next_turn_angle = 90.0f;
} else {
// get the heading of the current leg
int32_t ground_course_cd = get_bearing_cd(prev_WP_loc, next_WP_loc);
// work out the angle we need to turn through
auto_state.next_turn_angle = wrap_180_cd(next_ground_course_cd - ground_course_cd) * 0.01f;
}
}
/*
see if we have reached our loiter target
*/
bool Plane::reached_loiter_target(void)
{
if (quadplane.in_vtol_auto()) {
return auto_state.wp_distance < 3;
}
return nav_controller->reached_loiter_target();
}