mirror of https://github.com/ArduPilot/ardupilot
473 lines
18 KiB
C++
473 lines
18 KiB
C++
#include "AP_Frsky_SPort.h"
|
|
|
|
#include <AP_HAL/utility/sparse-endian.h>
|
|
#include <AP_BattMonitor/AP_BattMonitor.h>
|
|
#include <AP_GPS/AP_GPS.h>
|
|
#include <GCS_MAVLink/GCS.h>
|
|
#include <AP_RPM/AP_RPM.h>
|
|
|
|
#include "AP_Frsky_SPortParser.h"
|
|
|
|
#include <string.h>
|
|
|
|
extern const AP_HAL::HAL& hal;
|
|
|
|
AP_Frsky_SPort *AP_Frsky_SPort::singleton;
|
|
|
|
/*
|
|
* send telemetry data
|
|
* for FrSky SPort protocol (X-receivers)
|
|
*/
|
|
void AP_Frsky_SPort::send(void)
|
|
{
|
|
const uint16_t numc = MIN(_port->available(), 1024U);
|
|
|
|
// this is the constant for hub data frame
|
|
if (_port->txspace() < 19) {
|
|
return;
|
|
}
|
|
|
|
if (numc == 0) {
|
|
// no serial data to process do bg tasks
|
|
if (_SPort.vario_refresh) {
|
|
calc_nav_alt(); // nav altitude is not recalculated until all of it has been sent
|
|
_SPort.vario_refresh = false;
|
|
}
|
|
if (_SPort.gps_refresh) {
|
|
calc_gps_position(); // gps data is not recalculated until all of it has been sent
|
|
_SPort.gps_refresh = false;
|
|
}
|
|
return;
|
|
}
|
|
|
|
for (int16_t i = 0; i < numc; i++) {
|
|
int16_t readbyte = _port->read();
|
|
if (_SPort.sport_status == false) {
|
|
if (readbyte == FRAME_HEAD) {
|
|
_SPort.sport_status = true;
|
|
}
|
|
} else {
|
|
const AP_BattMonitor &_battery = AP::battery();
|
|
switch (readbyte) {
|
|
case SENSOR_ID_VARIO: // Sensor ID 0
|
|
switch (_SPort.vario_call) {
|
|
case 0:
|
|
send_sport_frame(SPORT_DATA_FRAME, ALT_ID, _SPort_data.alt_nav_meters*100 + _SPort_data.alt_nav_cm); // send altitude in cm
|
|
break;
|
|
case 1:
|
|
send_sport_frame(SPORT_DATA_FRAME, VARIO_ID, _SPort_data.vario_vspd); // send vspeed cm/s
|
|
_SPort.vario_refresh = true;
|
|
break;
|
|
}
|
|
if (++_SPort.vario_call > 1) {
|
|
_SPort.vario_call = 0;
|
|
}
|
|
break;
|
|
case SENSOR_ID_FAS: // Sensor ID 2
|
|
switch (_SPort.fas_call) {
|
|
case 0:
|
|
{
|
|
uint8_t percentage = 0;
|
|
IGNORE_RETURN(_battery.capacity_remaining_pct(percentage));
|
|
send_sport_frame(SPORT_DATA_FRAME, FUEL_ID, (uint16_t)roundf(percentage)); // send battery remaining
|
|
break;
|
|
}
|
|
case 1:
|
|
send_sport_frame(SPORT_DATA_FRAME, VFAS_ID, (uint16_t)roundf(_battery.voltage() * 100.0f)); // send battery voltage in cV
|
|
break;
|
|
case 2: {
|
|
float current;
|
|
if (!_battery.current_amps(current)) {
|
|
current = 0;
|
|
}
|
|
send_sport_frame(SPORT_DATA_FRAME, CURR_ID, (uint16_t)roundf(current * 10.0f)); // send current consumption in dA
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
if (++_SPort.fas_call > 2) {
|
|
_SPort.fas_call = 0;
|
|
}
|
|
break;
|
|
case SENSOR_ID_GPS: // Sensor ID 3
|
|
switch (_SPort.gps_call) {
|
|
case 0:
|
|
send_sport_frame(SPORT_DATA_FRAME, GPS_LONG_LATI_FIRST_ID, calc_gps_latlng(_passthrough.send_latitude)); // gps latitude or longitude
|
|
break;
|
|
case 1:
|
|
send_sport_frame(SPORT_DATA_FRAME, GPS_LONG_LATI_FIRST_ID, calc_gps_latlng(_passthrough.send_latitude)); // gps latitude or longitude
|
|
break;
|
|
case 2:
|
|
send_sport_frame(SPORT_DATA_FRAME, GPS_SPEED_ID, _SPort_data.speed_in_meter*1000 + _SPort_data.speed_in_centimeter*10); // send gps speed in mm/sec
|
|
break;
|
|
case 3:
|
|
send_sport_frame(SPORT_DATA_FRAME, GPS_ALT_ID, _SPort_data.alt_gps_meters*100+_SPort_data.alt_gps_cm); // send gps altitude in cm
|
|
break;
|
|
case 4:
|
|
send_sport_frame(SPORT_DATA_FRAME, GPS_COURS_ID, _SPort_data.yaw*100); // send heading in cd based on AHRS and not GPS
|
|
_SPort.gps_refresh = true;
|
|
break;
|
|
}
|
|
if (++_SPort.gps_call > 4) {
|
|
_SPort.gps_call = 0;
|
|
}
|
|
break;
|
|
case SENSOR_ID_RPM: // Sensor ID 4
|
|
{
|
|
const AP_RPM* rpm = AP::rpm();
|
|
if (rpm == nullptr) {
|
|
break;
|
|
}
|
|
int32_t value;
|
|
if (calc_rpm(_SPort.rpm_call, value)) {
|
|
// use high numbered frsky sensor ids to leave low numbered free for externally attached physical frsky sensors
|
|
uint16_t id = RPM1_ID;
|
|
if (_SPort.rpm_call != 0) {
|
|
// only two sensors are currently supported
|
|
id = RPM2_ID;
|
|
}
|
|
send_sport_frame(SPORT_DATA_FRAME, id, value);
|
|
}
|
|
if (++_SPort.rpm_call > MIN(rpm->num_sensors()-1, 1)) {
|
|
_SPort.rpm_call = 0;
|
|
}
|
|
}
|
|
break;
|
|
case SENSOR_ID_SP2UR: // Sensor ID 6
|
|
switch (_SPort.various_call) {
|
|
case 0 :
|
|
send_sport_frame(SPORT_DATA_FRAME, TEMP2_ID, (uint16_t)(AP::gps().num_sats() * 10 + AP::gps().status())); // send GPS status and number of satellites as num_sats*10 + status (to fit into a uint8_t)
|
|
break;
|
|
case 1:
|
|
send_sport_frame(SPORT_DATA_FRAME, TEMP1_ID, gcs().custom_mode()); // send flight mode
|
|
break;
|
|
}
|
|
if (++_SPort.various_call > 1) {
|
|
_SPort.various_call = 0;
|
|
}
|
|
break;
|
|
default:
|
|
{
|
|
// respond to custom user data polling
|
|
WITH_SEMAPHORE(_sport_push_buffer.sem);
|
|
if (_sport_push_buffer.pending && readbyte == _sport_push_buffer.packet.sensor) {
|
|
send_sport_frame(_sport_push_buffer.packet.frame, _sport_push_buffer.packet.appid, _sport_push_buffer.packet.data);
|
|
_sport_push_buffer.pending = false;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
_SPort.sport_status = false;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* prepare gps latitude/longitude data
|
|
* for FrSky SPort Passthrough (OpenTX) protocol (X-receivers)
|
|
*/
|
|
uint32_t AP_Frsky_SPort::calc_gps_latlng(bool &send_latitude)
|
|
{
|
|
const Location &loc = AP::gps().location(0); // use the first gps instance (same as in send_mavlink_gps_raw)
|
|
|
|
// alternate between latitude and longitude
|
|
if (send_latitude == true) {
|
|
send_latitude = false;
|
|
if (loc.lat < 0) {
|
|
return ((labs(loc.lat)/100)*6) | 0x40000000;
|
|
} else {
|
|
return ((labs(loc.lat)/100)*6);
|
|
}
|
|
} else {
|
|
send_latitude = true;
|
|
if (loc.lng < 0) {
|
|
return ((labs(loc.lng)/100)*6) | 0xC0000000;
|
|
} else {
|
|
return ((labs(loc.lng)/100)*6) | 0x80000000;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* send an 8 bytes SPort frame of FrSky data - for FrSky SPort protocol (X-receivers)
|
|
*/
|
|
void AP_Frsky_SPort::send_sport_frame(uint8_t frame, uint16_t appid, uint32_t data)
|
|
{
|
|
uint8_t buf[8];
|
|
|
|
buf[0] = frame;
|
|
buf[1] = appid & 0xFF;
|
|
buf[2] = appid >> 8;
|
|
memcpy(&buf[3], &data, 4);
|
|
|
|
uint16_t sum = 0;
|
|
for (uint8_t i=0; i<sizeof(buf)-1; i++) {
|
|
sum += buf[i];
|
|
sum += sum >> 8;
|
|
sum &= 0xFF;
|
|
}
|
|
sum = 0xff - ((sum & 0xff) + (sum >> 8));
|
|
buf[7] = (uint8_t)sum;
|
|
|
|
// perform byte stuffing per SPort spec
|
|
uint8_t len = 0;
|
|
uint8_t buf2[sizeof(buf)*2+1];
|
|
|
|
for (uint8_t i=0; i<sizeof(buf); i++) {
|
|
uint8_t c = buf[i];
|
|
if (c == FRAME_DLE || buf[i] == FRAME_HEAD) {
|
|
buf2[len++] = FRAME_DLE;
|
|
buf2[len++] = c ^ FRAME_XOR;
|
|
} else {
|
|
buf2[len++] = c;
|
|
}
|
|
}
|
|
#ifndef HAL_BOARD_SITL
|
|
/*
|
|
check that we haven't been too slow in responding to the new
|
|
UART data. If we respond too late then we will overwrite the next
|
|
polling frame.
|
|
SPort poll-to-poll period is 11.65ms, a frame takes 1.38ms
|
|
but specs require we release the bus before 8ms leaving us with 6500us
|
|
*/
|
|
const uint64_t tend_us = port->receive_time_constraint_us(1);
|
|
const uint64_t now_us = AP_HAL::micros64();
|
|
const uint64_t tdelay_us = now_us - tend_us;
|
|
if (tdelay_us > 6500) {
|
|
// we've been too slow in responding
|
|
return;
|
|
}
|
|
#endif
|
|
_port->write(buf2, len);
|
|
}
|
|
|
|
extern const AP_HAL::HAL& hal;
|
|
|
|
bool AP_Frsky_SPortParser::should_process_packet(const uint8_t *packet, bool discard_duplicates)
|
|
{
|
|
// check for duplicate packets
|
|
if (discard_duplicates && _parse_state.last_packet != nullptr) {
|
|
/*
|
|
Note: the polling byte packet[0] should be ignored in the comparison
|
|
because we might get the same packet with different polling bytes
|
|
We have 2 types of duplicate packets: ghost identical packets sent by the receiver
|
|
and user duplicate packets sent to compensate for bad link and frame loss, this
|
|
check should address both types.
|
|
*/
|
|
if (memcmp(&packet[1], &_parse_state.last_packet[1], SPORT_PACKET_SIZE-1) == 0) {
|
|
return false;
|
|
}
|
|
memcpy(_parse_state.last_packet, packet, SPORT_PACKET_SIZE);
|
|
}
|
|
//check CRC
|
|
int16_t crc = 0;
|
|
for (uint8_t i=1; i<SPORT_PACKET_SIZE; ++i) {
|
|
crc += _parse_state.rx_buffer[i]; // 0-1FE
|
|
crc += crc >> 8; // 0-1FF
|
|
crc &= 0x00ff; // 0-FF
|
|
}
|
|
return (crc == 0x00ff);
|
|
}
|
|
|
|
bool AP_Frsky_SPortParser::process_byte(AP_Frsky_SPort::sport_packet_t &sport_packet, const uint8_t data)
|
|
{
|
|
switch (_parse_state.state) {
|
|
case ParseState::START:
|
|
if (_parse_state.rx_buffer_count < TELEMETRY_RX_BUFFER_SIZE) {
|
|
_parse_state.rx_buffer[_parse_state.rx_buffer_count++] = data;
|
|
}
|
|
_parse_state.state = ParseState::IN_FRAME;
|
|
break;
|
|
|
|
case ParseState::IN_FRAME:
|
|
if (data == FRAME_DLE) {
|
|
_parse_state.state = ParseState::XOR; // XOR next byte
|
|
} else if (data == FRAME_HEAD) {
|
|
_parse_state.state = ParseState::IN_FRAME ;
|
|
_parse_state.rx_buffer_count = 0;
|
|
break;
|
|
} else if (_parse_state.rx_buffer_count < TELEMETRY_RX_BUFFER_SIZE) {
|
|
_parse_state.rx_buffer[_parse_state.rx_buffer_count++] = data;
|
|
}
|
|
break;
|
|
|
|
case ParseState::XOR:
|
|
if (_parse_state.rx_buffer_count < TELEMETRY_RX_BUFFER_SIZE) {
|
|
_parse_state.rx_buffer[_parse_state.rx_buffer_count++] = data ^ STUFF_MASK;
|
|
}
|
|
_parse_state.state = ParseState::IN_FRAME;
|
|
break;
|
|
|
|
case ParseState::IDLE:
|
|
if (data == FRAME_HEAD) {
|
|
_parse_state.rx_buffer_count = 0;
|
|
_parse_state.state = ParseState::START;
|
|
}
|
|
break;
|
|
|
|
} // switch
|
|
|
|
if (_parse_state.rx_buffer_count >= SPORT_PACKET_SIZE) {
|
|
_parse_state.rx_buffer_count = 0;
|
|
_parse_state.state = ParseState::IDLE;
|
|
// feed the packet only if it's not a duplicate
|
|
return get_packet(sport_packet, true);
|
|
}
|
|
return false;
|
|
}
|
|
|
|
bool AP_Frsky_SPortParser::get_packet(AP_Frsky_SPort::sport_packet_t &sport_packet, bool discard_duplicates)
|
|
{
|
|
if (!should_process_packet(_parse_state.rx_buffer, discard_duplicates)) {
|
|
return false;
|
|
}
|
|
|
|
const AP_Frsky_SPort::sport_packet_t sp {
|
|
_parse_state.rx_buffer[0],
|
|
_parse_state.rx_buffer[1],
|
|
le16toh_ptr(&_parse_state.rx_buffer[2]),
|
|
le32toh_ptr(&_parse_state.rx_buffer[4])
|
|
};
|
|
|
|
sport_packet = sp;
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* Calculates the sensor id from the physical sensor index [0-27]
|
|
0x00, // Physical ID 0 - Vario2 (altimeter high precision)
|
|
0xA1, // Physical ID 1 - FLVSS Lipo sensor
|
|
0x22, // Physical ID 2 - FAS-40S current sensor
|
|
0x83, // Physical ID 3 - GPS / altimeter (normal precision)
|
|
0xE4, // Physical ID 4 - RPM
|
|
0x45, // Physical ID 5 - SP2UART(Host)
|
|
0xC6, // Physical ID 6 - SPUART(Remote)
|
|
0x67, // Physical ID 7 - Ardupilot/Betaflight EXTRA DOWNLINK
|
|
0x48, // Physical ID 8 -
|
|
0xE9, // Physical ID 9 -
|
|
0x6A, // Physical ID 10 -
|
|
0xCB, // Physical ID 11 -
|
|
0xAC, // Physical ID 12 -
|
|
0x0D, // Physical ID 13 - Ardupilot/Betaflight UPLINK
|
|
0x8E, // Physical ID 14 -
|
|
0x2F, // Physical ID 15 -
|
|
0xD0, // Physical ID 16 -
|
|
0x71, // Physical ID 17 -
|
|
0xF2, // Physical ID 18 -
|
|
0x53, // Physical ID 19 -
|
|
0x34, // Physical ID 20 - Ardupilot/Betaflight EXTRA DOWNLINK
|
|
0x95, // Physical ID 21 -
|
|
0x16, // Physical ID 22 - GAS Suite
|
|
0xB7, // Physical ID 23 - IMU ACC (x,y,z)
|
|
0x98, // Physical ID 24 -
|
|
0x39, // Physical ID 25 - Power Box
|
|
0xBA // Physical ID 26 - Temp
|
|
0x1B // Physical ID 27 - ArduPilot/Betaflight DEFAULT DOWNLINK
|
|
* for FrSky SPort Passthrough (OpenTX) protocol (X-receivers)
|
|
*/
|
|
#define BIT(x, index) (((x) >> index) & 0x01)
|
|
uint8_t AP_Frsky_SPort::calc_sensor_id(const uint8_t physical_id)
|
|
{
|
|
uint8_t result = physical_id;
|
|
result += (BIT(physical_id, 0) ^ BIT(physical_id, 1) ^ BIT(physical_id, 2)) << 5;
|
|
result += (BIT(physical_id, 2) ^ BIT(physical_id, 3) ^ BIT(physical_id, 4)) << 6;
|
|
result += (BIT(physical_id, 0) ^ BIT(physical_id, 2) ^ BIT(physical_id, 4)) << 7;
|
|
return result;
|
|
}
|
|
|
|
/*
|
|
* prepare value for transmission through FrSky link
|
|
* for FrSky SPort Passthrough (OpenTX) protocol (X-receivers)
|
|
*/
|
|
uint16_t AP_Frsky_SPort::prep_number(int32_t number, uint8_t digits, uint8_t power)
|
|
{
|
|
uint16_t res = 0;
|
|
uint32_t abs_number = abs(number);
|
|
|
|
if ((digits == 2) && (power == 0)) { // number encoded on 7 bits, client side needs to know if expected range is 0,127 or -63,63
|
|
uint8_t max_value = number < 0 ? (0x1<<6)-1 : (0x1<<7)-1;
|
|
res = constrain_int16(abs_number,0,max_value);
|
|
if (number < 0) { // if number is negative, add sign bit in front
|
|
res |= 1U<<6;
|
|
}
|
|
} else if ((digits == 2) && (power == 1)) { // number encoded on 8 bits: 7 bits for digits + 1 for 10^power
|
|
if (abs_number < 100) {
|
|
res = abs_number<<1;
|
|
} else if (abs_number < 1270) {
|
|
res = ((uint8_t)roundf(abs_number * 0.1f)<<1)|0x1;
|
|
} else { // transmit max possible value (0x7F x 10^1 = 1270)
|
|
res = 0xFF;
|
|
}
|
|
if (number < 0) { // if number is negative, add sign bit in front
|
|
res |= 0x1<<8;
|
|
}
|
|
} else if ((digits == 2) && (power == 2)) { // number encoded on 9 bits: 7 bits for digits + 2 for 10^power
|
|
if (abs_number < 100) {
|
|
res = abs_number<<2;
|
|
} else if (abs_number < 1000) {
|
|
res = ((uint8_t)roundf(abs_number * 0.1f)<<2)|0x1;
|
|
} else if (abs_number < 10000) {
|
|
res = ((uint8_t)roundf(abs_number * 0.01f)<<2)|0x2;
|
|
} else if (abs_number < 127000) {
|
|
res = ((uint8_t)roundf(abs_number * 0.001f)<<2)|0x3;
|
|
} else { // transmit max possible value (0x7F x 10^3 = 127000)
|
|
res = 0x1FF;
|
|
}
|
|
if (number < 0) { // if number is negative, add sign bit in front
|
|
res |= 0x1<<9;
|
|
}
|
|
} else if ((digits == 3) && (power == 1)) { // number encoded on 11 bits: 10 bits for digits + 1 for 10^power
|
|
if (abs_number < 1000) {
|
|
res = abs_number<<1;
|
|
} else if (abs_number < 10240) {
|
|
res = ((uint16_t)roundf(abs_number * 0.1f)<<1)|0x1;
|
|
} else { // transmit max possible value (0x3FF x 10^1 = 10240)
|
|
res = 0x7FF;
|
|
}
|
|
if (number < 0) { // if number is negative, add sign bit in front
|
|
res |= 0x1<<11;
|
|
}
|
|
} else if ((digits == 3) && (power == 2)) { // number encoded on 12 bits: 10 bits for digits + 2 for 10^power
|
|
if (abs_number < 1000) {
|
|
res = abs_number<<2;
|
|
} else if (abs_number < 10000) {
|
|
res = ((uint16_t)roundf(abs_number * 0.1f)<<2)|0x1;
|
|
} else if (abs_number < 100000) {
|
|
res = ((uint16_t)roundf(abs_number * 0.01f)<<2)|0x2;
|
|
} else if (abs_number < 1024000) {
|
|
res = ((uint16_t)roundf(abs_number * 0.001f)<<2)|0x3;
|
|
} else { // transmit max possible value (0x3FF x 10^3 = 127000)
|
|
res = 0xFFF;
|
|
}
|
|
if (number < 0) { // if number is negative, add sign bit in front
|
|
res |= 0x1<<12;
|
|
}
|
|
}
|
|
return res;
|
|
}
|
|
|
|
/*
|
|
* Push user data down the telemetry link by responding to sensor polling (sport)
|
|
* or by using dedicated slots in the scheduler (fport)
|
|
* for SPort and FPort protocols (X-receivers)
|
|
*/
|
|
bool AP_Frsky_SPort::sport_telemetry_push(uint8_t sensor, uint8_t frame, uint16_t appid, int32_t data)
|
|
{
|
|
WITH_SEMAPHORE(_sport_push_buffer.sem);
|
|
if (_sport_push_buffer.pending) {
|
|
return false;
|
|
}
|
|
_sport_push_buffer.packet.sensor = sensor;
|
|
_sport_push_buffer.packet.frame = frame;
|
|
_sport_push_buffer.packet.appid = appid;
|
|
_sport_push_buffer.packet.data = static_cast<uint32_t>(data);
|
|
_sport_push_buffer.pending = true;
|
|
return true;
|
|
}
|
|
|
|
namespace AP {
|
|
AP_Frsky_SPort *frsky_sport() {
|
|
return AP_Frsky_SPort::get_singleton();
|
|
}
|
|
};
|