ardupilot/ArduPlane/GCS_Plane.cpp

150 lines
5.2 KiB
C++

#include "GCS_Plane.h"
#include "Plane.h"
uint8_t GCS_Plane::sysid_this_mav() const
{
return plane.g.sysid_this_mav;
}
void GCS_Plane::update_vehicle_sensor_status_flags(void)
{
// first what sensors/controllers we have
const AP_Airspeed *airspeed = AP_Airspeed::get_singleton();
if (airspeed && airspeed->enabled()) {
control_sensors_present |= MAV_SYS_STATUS_SENSOR_DIFFERENTIAL_PRESSURE;
}
#if OPTFLOW == ENABLED
const OpticalFlow *optflow = AP::opticalflow();
if (optflow && optflow->enabled()) {
control_sensors_present |= MAV_SYS_STATUS_SENSOR_OPTICAL_FLOW;
control_sensors_enabled |= MAV_SYS_STATUS_SENSOR_OPTICAL_FLOW;
}
#endif
if (plane.have_reverse_thrust()) {
control_sensors_present |= MAV_SYS_STATUS_REVERSE_MOTOR;
}
if (airspeed && airspeed->enabled() && airspeed->use()) {
control_sensors_enabled |= MAV_SYS_STATUS_SENSOR_DIFFERENTIAL_PRESSURE;
}
control_sensors_present |=
MAV_SYS_STATUS_SENSOR_ANGULAR_RATE_CONTROL |
MAV_SYS_STATUS_SENSOR_ATTITUDE_STABILIZATION |
MAV_SYS_STATUS_SENSOR_YAW_POSITION |
MAV_SYS_STATUS_SENSOR_Z_ALTITUDE_CONTROL |
MAV_SYS_STATUS_SENSOR_XY_POSITION_CONTROL;
bool rate_controlled = false;
bool attitude_stabilized = false;
switch (plane.control_mode->mode_number()) {
case Mode::Number::MANUAL:
break;
case Mode::Number::ACRO:
case Mode::Number::QACRO:
rate_controlled = true;
break;
case Mode::Number::STABILIZE:
case Mode::Number::FLY_BY_WIRE_A:
case Mode::Number::AUTOTUNE:
case Mode::Number::QSTABILIZE:
case Mode::Number::QHOVER:
case Mode::Number::QLAND:
case Mode::Number::QLOITER:
case Mode::Number::QAUTOTUNE:
case Mode::Number::FLY_BY_WIRE_B:
case Mode::Number::CRUISE:
rate_controlled = true;
attitude_stabilized = true;
break;
case Mode::Number::TRAINING:
if (!plane.training_manual_roll || !plane.training_manual_pitch) {
rate_controlled = true;
attitude_stabilized = true;
}
break;
case Mode::Number::AUTO:
case Mode::Number::RTL:
case Mode::Number::LOITER:
case Mode::Number::AVOID_ADSB:
case Mode::Number::GUIDED:
case Mode::Number::CIRCLE:
case Mode::Number::TAKEOFF:
case Mode::Number::QRTL:
case Mode::Number::THERMAL:
rate_controlled = true;
attitude_stabilized = true;
control_sensors_enabled |= MAV_SYS_STATUS_SENSOR_YAW_POSITION;
control_sensors_health |= MAV_SYS_STATUS_SENSOR_YAW_POSITION;
control_sensors_enabled |= MAV_SYS_STATUS_SENSOR_Z_ALTITUDE_CONTROL;
control_sensors_health |= MAV_SYS_STATUS_SENSOR_Z_ALTITUDE_CONTROL;
control_sensors_enabled |= MAV_SYS_STATUS_SENSOR_XY_POSITION_CONTROL;
control_sensors_health |= MAV_SYS_STATUS_SENSOR_XY_POSITION_CONTROL;
break;
case Mode::Number::INITIALISING:
break;
}
if (rate_controlled) {
control_sensors_enabled |= MAV_SYS_STATUS_SENSOR_ANGULAR_RATE_CONTROL; // 3D angular rate control
control_sensors_health |= MAV_SYS_STATUS_SENSOR_ANGULAR_RATE_CONTROL; // 3D angular rate control
}
if (attitude_stabilized) {
control_sensors_enabled |= MAV_SYS_STATUS_SENSOR_ATTITUDE_STABILIZATION;
control_sensors_health |= MAV_SYS_STATUS_SENSOR_ATTITUDE_STABILIZATION;
}
#if OPTFLOW == ENABLED
if (optflow && optflow->healthy()) {
control_sensors_health |= MAV_SYS_STATUS_SENSOR_OPTICAL_FLOW;
}
#endif
if (airspeed && airspeed->all_healthy()) {
control_sensors_health |= MAV_SYS_STATUS_SENSOR_DIFFERENTIAL_PRESSURE;
}
control_sensors_present |= MAV_SYS_STATUS_SENSOR_RC_RECEIVER;
control_sensors_enabled |= MAV_SYS_STATUS_SENSOR_RC_RECEIVER;
if (millis() - plane.failsafe.last_valid_rc_ms < 200) {
control_sensors_health |= MAV_SYS_STATUS_SENSOR_RC_RECEIVER;
}
#if AP_TERRAIN_AVAILABLE
switch (plane.terrain.status()) {
case AP_Terrain::TerrainStatusDisabled:
break;
case AP_Terrain::TerrainStatusUnhealthy:
control_sensors_present |= MAV_SYS_STATUS_TERRAIN;
control_sensors_enabled |= MAV_SYS_STATUS_TERRAIN;
break;
case AP_Terrain::TerrainStatusOK:
control_sensors_present |= MAV_SYS_STATUS_TERRAIN;
control_sensors_enabled |= MAV_SYS_STATUS_TERRAIN;
control_sensors_health |= MAV_SYS_STATUS_TERRAIN;
break;
}
#endif
const RangeFinder *rangefinder = RangeFinder::get_singleton();
if (rangefinder && rangefinder->has_orientation(ROTATION_PITCH_270)) {
control_sensors_present |= MAV_SYS_STATUS_SENSOR_LASER_POSITION;
if (plane.g.rangefinder_landing) {
control_sensors_enabled |= MAV_SYS_STATUS_SENSOR_LASER_POSITION;
}
if (rangefinder->has_data_orient(ROTATION_PITCH_270)) {
control_sensors_health |= MAV_SYS_STATUS_SENSOR_LASER_POSITION;
}
}
if (plane.have_reverse_thrust() && SRV_Channels::get_output_scaled(SRV_Channel::k_throttle) < 0) {
control_sensors_enabled |= MAV_SYS_STATUS_REVERSE_MOTOR;
control_sensors_health |= MAV_SYS_STATUS_REVERSE_MOTOR;
}
}