mirror of https://github.com/ArduPilot/ardupilot
157 lines
6.4 KiB
C
157 lines
6.4 KiB
C
// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
|
|
/*
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
///
|
|
/// @file AP_Common.h
|
|
/// @brief Common definitions and utility routines for the ArduPilot
|
|
/// libraries.
|
|
///
|
|
|
|
#ifndef __AP_COMMON_H__
|
|
#define __AP_COMMON_H__
|
|
|
|
#include <stdint.h>
|
|
#include <stdlib.h>
|
|
#include <stdbool.h>
|
|
|
|
#pragma GCC diagnostic warning "-Wall"
|
|
#pragma GCC diagnostic warning "-Wextra"
|
|
#pragma GCC diagnostic warning "-Wlogical-op"
|
|
#pragma GCC diagnostic ignored "-Wredundant-decls"
|
|
|
|
// used to pack structures
|
|
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
|
#define PACKED
|
|
#else
|
|
#define PACKED __attribute__((__packed__))
|
|
#endif
|
|
|
|
// this can be used to optimize individual functions
|
|
#define OPTIMIZE(level) __attribute__((optimize(level)))
|
|
|
|
// Make some dire warnings into errors
|
|
//
|
|
// Some warnings indicate questionable code; rather than let
|
|
// these slide, we force them to become errors so that the
|
|
// developer has to find a safer alternative.
|
|
//
|
|
//#pragma GCC diagnostic error "-Wfloat-equal"
|
|
|
|
// The following is strictly for type-checking arguments to printf_P calls
|
|
// in conjunction with a suitably modified Arduino IDE; never define for
|
|
// production as it generates bad code.
|
|
//
|
|
#if PRINTF_FORMAT_WARNING_DEBUG
|
|
# undef PSTR
|
|
# define PSTR(_x) _x // help the compiler with printf_P
|
|
# define float double // silence spurious format warnings for %f
|
|
#endif
|
|
|
|
#define FPSTR(s) (wchar_t *)(s)
|
|
|
|
#define ToRad(x) radians(x) // *pi/180
|
|
#define ToDeg(x) degrees(x) // *180/pi
|
|
|
|
/*
|
|
check if bit bitnumber is set in value, returned as a
|
|
bool. Bitnumber starts at 0 for the first bit
|
|
*/
|
|
#define BIT_IS_SET(value, bitnumber) (((value) & (1U<<(bitnumber))) != 0)
|
|
|
|
// @}
|
|
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @name Types
|
|
///
|
|
/// Data structures and types used throughout the libraries and applications. 0 = default
|
|
/// bit 0: Altitude is stored 0: Absolute, 1: Relative
|
|
/// bit 1: Chnage Alt between WP 0: Gradually, 1: ASAP
|
|
/// bit 2: Direction of loiter command 0: Clockwise 1: Counter-Clockwise
|
|
/// bit 3: Req.to hit WP.alt to continue 0: No, 1: Yes
|
|
/// bit 4: Relative to Home 0: No, 1: Yes
|
|
/// bit 5:
|
|
/// bit 6:
|
|
/// bit 7: Move to next Command 0: YES, 1: Loiter until commanded
|
|
|
|
//@{
|
|
#define LOCATION_MASK_OPTIONS_RELATIVE_ALT (1<<0) // 1 = Relative altitude
|
|
#define LOCATION_MASK_OPTIONS_LOITER_DIRECTION (1<<2) // 0 = CW, 1 = CCW
|
|
|
|
struct PACKED Location_Option_Flags {
|
|
uint8_t relative_alt : 1; // 1 if altitude is relateive to home
|
|
uint8_t unused1 : 1; // unused flag (defined so that loiter_ccw uses the correct bit)
|
|
uint8_t loiter_ccw : 1; // 0 if clockwise, 1 if counter clockwise
|
|
};
|
|
|
|
struct PACKED Location {
|
|
union {
|
|
Location_Option_Flags flags; ///< options bitmask (1<<0 = relative altitude)
|
|
uint8_t options; /// allows writing all flags to eeprom as one byte
|
|
};
|
|
// by making alt 24 bit we can make p1 in a command 16 bit,
|
|
// allowing an accurate angle in centi-degrees. This keeps the
|
|
// storage cost per mission item at 15 bytes, and allows mission
|
|
// altitudes of up to +/- 83km
|
|
int32_t alt:24; ///< param 2 - Altitude in centimeters (meters * 100)
|
|
int32_t lat; ///< param 3 - Lattitude * 10**7
|
|
int32_t lng; ///< param 4 - Longitude * 10**7
|
|
};
|
|
|
|
struct PACKED RallyLocation {
|
|
int32_t lat; //Latitude * 10^7
|
|
int32_t lng; //Longitude * 10^7
|
|
int16_t alt; //transit altitude (and loiter altitude) in meters;
|
|
int16_t break_alt; //when autolanding, break out of loiter at this alt (meters)
|
|
uint16_t land_dir; //when the time comes to auto-land, try to land in this direction (centidegrees)
|
|
uint8_t flags; //bit 0 = seek favorable winds when choosing a landing poi
|
|
//bit 1 = do auto land after arriving
|
|
//all other bits are for future use.
|
|
};
|
|
|
|
//@}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @name Conversions
|
|
///
|
|
/// Conversion macros and factors.
|
|
///
|
|
//@{
|
|
|
|
|
|
/* Product IDs for all supported products follow */
|
|
|
|
#define AP_PRODUCT_ID_NONE 0x00 // Hardware in the loop
|
|
#define AP_PRODUCT_ID_APM1_1280 0x01 // APM1 with 1280 CPUs
|
|
#define AP_PRODUCT_ID_APM1_2560 0x02 // APM1 with 2560 CPUs
|
|
#define AP_PRODUCT_ID_SITL 0x03 // Software in the loop
|
|
#define AP_PRODUCT_ID_PX4 0x04 // PX4 on NuttX
|
|
#define AP_PRODUCT_ID_PX4_V2 0x05 // PX4 FMU2 on NuttX
|
|
#define AP_PRODUCT_ID_APM2ES_REV_C4 0x14 // APM2 with MPU6000ES_REV_C4
|
|
#define AP_PRODUCT_ID_APM2ES_REV_C5 0x15 // APM2 with MPU6000ES_REV_C5
|
|
#define AP_PRODUCT_ID_APM2ES_REV_D6 0x16 // APM2 with MPU6000ES_REV_D6
|
|
#define AP_PRODUCT_ID_APM2ES_REV_D7 0x17 // APM2 with MPU6000ES_REV_D7
|
|
#define AP_PRODUCT_ID_APM2ES_REV_D8 0x18 // APM2 with MPU6000ES_REV_D8
|
|
#define AP_PRODUCT_ID_APM2_REV_C4 0x54 // APM2 with MPU6000_REV_C4
|
|
#define AP_PRODUCT_ID_APM2_REV_C5 0x55 // APM2 with MPU6000_REV_C5
|
|
#define AP_PRODUCT_ID_APM2_REV_D6 0x56 // APM2 with MPU6000_REV_D6
|
|
#define AP_PRODUCT_ID_APM2_REV_D7 0x57 // APM2 with MPU6000_REV_D7
|
|
#define AP_PRODUCT_ID_APM2_REV_D8 0x58 // APM2 with MPU6000_REV_D8
|
|
#define AP_PRODUCT_ID_APM2_REV_D9 0x59 // APM2 with MPU6000_REV_D9
|
|
#define AP_PRODUCT_ID_FLYMAPLE 0x100 // Flymaple with ITG3205, ADXL345, HMC5883, BMP085
|
|
#define AP_PRODUCT_ID_L3G4200D 0x101 // Linux with L3G4200D and ADXL345
|
|
|
|
#endif // _AP_COMMON_H
|