.. |
.gitignore
|
Improvements to cmake.
|
2011-09-29 21:23:26 -04:00 |
APM_Config.h
|
ACM: Code Cleanup
|
2012-12-08 14:49:38 -05:00 |
APM_Config_mavlink_hil.h
|
uncrustify ArduCopter/APM_Config_mavlink_hil.h
|
2012-08-21 18:56:56 -07:00 |
AP_State.pde
|
ArduCopter: RTL clean-up and slightly improved landing sensor
|
2012-12-06 10:31:52 +09:00 |
ArduCopter.pde
|
ArduCopter: move gcs updates to run only when there are 4ms of spare time before the next 100hz iteration starts
|
2012-12-13 23:09:26 +09:00 |
Attitude.pde
|
ArduCopter: updated accel based throttle to use ahrs's get_accel_ef method
|
2012-12-12 16:29:46 +09:00 |
CMakeLists.txt
|
Worked on ArduCopter cmake options.
|
2012-04-19 16:05:08 -04:00 |
GCS.h
|
uncrustify ArduCopter/GCS.h
|
2012-08-21 18:56:56 -07:00 |
GCS.pde
|
uncrustify ArduCopter/GCS.pde
|
2012-08-21 18:56:00 -07:00 |
GCS_Mavlink.pde
|
ArduCopter: move gcs updates to run only when there are 4ms of spare time before the next 100hz iteration starts
|
2012-12-13 23:09:26 +09:00 |
Log.pde
|
ArduCopter, AP_InertialNav: consolidated ThirdOrderComplementaryFilter into AP_InertialNav to save about 200bytes of RAM
|
2012-12-10 00:43:11 +09:00 |
Makefile
|
AHRS: removed Quaternion build support from APM/ACM/rover
|
2012-08-22 10:42:21 +10:00 |
Parameters.h
|
ArduCopter: renamed BATT_FAILSAFE to FS_BATT_ENABLE
|
2012-12-10 23:47:14 +09:00 |
Parameters.pde
|
ArduCopter: bug fix so AP_Limits does not use up memory if it is disabled
|
2012-12-13 16:07:34 +09:00 |
ReleaseNotes.txt
|
ArduCopter: added ReleaseNotes.txt
|
2012-11-22 09:51:04 +09:00 |
UserCode.pde
|
uncrustify ArduCopter/UserCode.pde
|
2012-08-21 18:56:01 -07:00 |
UserVariables.h
|
uncrustify ArduCopter/UserVariables.h
|
2012-08-21 18:56:57 -07:00 |
command_description.txt
|
Cleanup: rename files with spaces in their names, replace with underscores
|
2012-02-28 16:14:31 -08:00 |
commands.pde
|
ArduCopter: auto yaw changes to allow pilot override of yaw during missions
|
2012-12-08 14:23:32 +09:00 |
commands_logic.pde
|
ArduCopter: allow RTL's yaw mode to be overridden with a #define in APM_Config.h
|
2012-12-13 00:15:30 +09:00 |
commands_process.pde
|
ArduCopter: add comments at the top of many navigation functions
|
2012-12-09 15:50:50 +09:00 |
config.h
|
ArduCopter: allow RTL's yaw mode to be overridden with a #define in APM_Config.h
|
2012-12-13 00:15:30 +09:00 |
config_channels.h
|
ArduCopter: remove unnecessary references to CH_CAM_PITCH, CH_CAM_ROLL, CH_CAM_YAW
|
2012-09-02 12:47:27 +09:00 |
control_modes.pde
|
ArduCopter: allow triggering of camera from a mission
|
2012-12-06 23:48:30 +09:00 |
defines.h
|
ArduCopter: add YAW_OVR_BEHAVE to allow control of when autopilot takes back control of yaw after pilot overrides it during a mission
|
2012-12-09 18:04:31 +09:00 |
events.pde
|
ArduCopter: renamed BATT_FAILSAFE to FS_BATT_ENABLE
|
2012-12-10 23:47:14 +09:00 |
failsafe.pde
|
Ap state updates
|
2012-11-09 22:15:15 -08:00 |
flip.pde
|
ArduCopter: added back in angle boost and recombined for heli and multicopter
|
2012-12-06 10:30:55 +09:00 |
inertia.pde
|
ArduCopter: allow INERTIAL_NAV to be enabled separately for horizontal and vertical position
|
2012-12-06 10:31:41 +09:00 |
leds.pde
|
ArduCopter: replaced digitalRead and digitalWrite with faster calls
|
2012-11-19 01:16:07 +09:00 |
limits.pde
|
ArduCopter: RTL clean-up and slightly improved landing sensor
|
2012-12-06 10:31:52 +09:00 |
motors.pde
|
ArduCopter: remove throttle limit of 800 for quads, hexas and octacopters
|
2012-12-13 20:30:23 +09:00 |
navigation.pde
|
ArduCopter: remove weird character from navigation.pde
|
2012-12-12 11:05:16 +09:00 |
options.cmake
|
ArduCopter: update comments related to CH7 switch options
|
2012-12-06 17:40:36 +09:00 |
perf_info.pde
|
ArduCopter: performance monitoring - changed loop counters to uint16_t.
|
2012-11-19 11:55:47 +09:00 |
radio.pde
|
ArduCopter: rename throttle failsafe parameters.
|
2012-12-10 23:38:43 +09:00 |
read_me.text
|
renamed top level directories
|
2011-09-09 11:27:41 +10:00 |
sensors.pde
|
ArduCopter: only attempt to change settings of optical flow sensor if it has been successfully initialised
|
2012-12-11 00:14:29 +09:00 |
setup.pde
|
ArduCopter: clear ahrs roll and pitch trims after an accel level command
|
2012-12-12 17:17:09 +09:00 |
system.pde
|
ArduCopter: bug fix so AP_Limits does not use up memory if it is disabled
|
2012-12-13 16:07:34 +09:00 |
test.pde
|
ArduCopter: rename throttle failsafe parameters.
|
2012-12-10 23:38:43 +09:00 |
toy.pde
|
ACM: make it possible to run CLI on radio port in ArduCopter
|
2012-11-21 21:41:34 +11:00 |