ardupilot/ArduCopter
Randy Mackay 054f05d285 Copter: AC3.3-rc3 version 2015-05-02 17:20:26 +09:00
..
.gitignore Improvements to cmake. 2011-09-29 21:23:26 -04:00
APM_Config.h Copter: simplify APM_Config after removing APM1,2 support 2015-03-13 16:41:05 +09:00
APM_Config_mavlink_hil.h Copter: convert to new GPS API 2014-04-01 06:38:24 +11:00
AP_State.pde Copter: Log Emergency Stop and Motor Interlock status 2015-05-01 14:30:43 +09:00
ArduCopter.pde Copter: AC3.3-rc3 version 2015-05-02 17:20:26 +09:00
Attitude.pde Copter: fix floating point const compiler warning 2015-05-01 12:56:38 +09:00
GCS_Mavlink.pde Copter: minor GCS_MAVLink comments 2015-05-01 12:56:40 +09:00
Log.pde Copter: add logging for CH6 parameter tuning 2015-04-28 14:14:01 +09:00
Makefile ArduCopter Makefile: Don't include targets.mk directly (included by apm.mk) 2013-01-09 13:15:38 -08:00
Parameters.h Copter: mavlink initiated takeoff in alt-hold modes 2015-05-01 12:56:18 +09:00
Parameters.pde Copter: rename "estop" to "emergency stop". 2015-05-01 14:30:41 +09:00
ReleaseNotes.txt Copter: AC3.3-rc3 release notes 2015-05-02 17:20:24 +09:00
UserCode.pde Copter: minor user hooks cleanup 2013-05-17 12:19:07 +09:00
UserVariables.h Copter: minor user hooks cleanup 2013-05-17 12:19:07 +09:00
commands.pde ArduCopter: Remove kruft from old RTK driver 2015-04-24 08:01:32 +10:00
commands_logic.pde Copter: add call to send digicam configure messages from a mission item 2015-04-20 13:50:19 +09:00
compassmot.pde Copter: Rename output_min() to enable_motor_output() 2015-05-01 14:30:44 +09:00
compat.h Copter: remove unused HIGH, LOW definitions 2014-05-09 16:35:21 +09:00
compat.pde Copter: reduced build warnings 2015-02-18 11:13:48 +11:00
config.h Copter: add PILOT_TKOFF_ALT_DEFAULT definition 2015-05-01 12:56:35 +09:00
config_channels.h ArduCopter: remove unnecessary references to CH_CAM_PITCH, CH_CAM_ROLL, CH_CAM_YAW 2012-09-02 12:47:27 +09:00
control_acro.pde Copter: Change throttle_zero to check interlock and E-stop status 2015-05-01 14:30:30 +09:00
control_althold.pde Copter: autopilot modes to check for motor interlock status 2015-05-01 14:30:33 +09:00
control_auto.pde Copter: autopilot modes to check for motor interlock status 2015-05-01 14:30:33 +09:00
control_autotune.pde Copter: autopilot modes to check for motor interlock status 2015-05-01 14:30:33 +09:00
control_circle.pde Copter: autopilot modes to check for motor interlock status 2015-05-01 14:30:33 +09:00
control_drift.pde Copter: autopilot modes to check for motor interlock status 2015-05-01 14:30:33 +09:00
control_flip.pde Copter: Change throttle_zero to check interlock and E-stop status 2015-05-01 14:30:30 +09:00
control_guided.pde Copter: autopilot modes to check for motor interlock status 2015-05-01 14:30:33 +09:00
control_land.pde Copter: autopilot modes to check for motor interlock status 2015-05-01 14:30:33 +09:00
control_loiter.pde Copter: autopilot modes to check for motor interlock status 2015-05-01 14:30:33 +09:00
control_poshold.pde Copter: autopilot modes to check for motor interlock status 2015-05-01 14:30:33 +09:00
control_rtl.pde Copter: get_RTL_alt returns alt above home 2015-05-01 16:37:36 +09:00
control_sport.pde Copter: Change throttle_zero to check interlock and E-stop status 2015-05-01 14:30:30 +09:00
control_stabilize.pde Copter: Change throttle_zero to check interlock and E-stop status 2015-05-01 14:30:30 +09:00
control_stop.pde Copter: Initial creation of control_stop file 2015-04-26 16:11:43 +09:00
crash_check.pde Copter: fixed some build warnings 2014-10-16 14:04:11 +09:00
defines.h Copter: explicitly define flight modes enum 2015-05-02 13:24:33 +09:00
ekf_check.pde Copter: ekf_check ok if optflow pos available 2015-04-10 11:08:21 +09:00
esc_calibration.pde Copter: fixup Windows newlines 2015-04-16 13:29:57 +09:00
events.pde Copter: remove GPS glitch and failsafe 2015-03-13 16:40:46 +09:00
failsafe.pde Copter: enable CPU failsafe after initialisation 2015-04-13 15:58:13 +09:00
fence.pde Copter: fix alt sent to fence_check to be meters 2015-04-14 16:10:09 +09:00
flight_mode.pde Copter: take-off uses PosControl's add_takeoff method 2015-05-01 12:56:32 +09:00
heli.h TradHeli: Move two static bools into heli_flags structure to save 2 bytes RAM. 2014-07-13 17:11:30 +09:00
heli.pde Copter: use new lowpass filter 2015-04-17 10:46:50 +09:00
heli_control_acro.pde Copter: add PILOT_THR_FILT and call set_throttle_out functions with that value 2015-04-16 21:00:11 +09:00
heli_control_stabilize.pde Copter: add PILOT_THR_FILT and call set_throttle_out functions with that value 2015-04-16 21:00:11 +09:00
inertia.pde Copter: update inertial alt only after home is set 2015-04-09 10:57:04 +09:00
land_detector.pde Copter: use LowPassFilterVector3f for land detector accel filter 2015-04-17 10:46:56 +09:00
landing_gear.pde Copter: Create check_if_auxsw_mode_used() to check for function usage 2015-03-17 21:18:47 +09:00
leds.pde Copter: remove CopterLED from main code 2013-11-30 18:20:55 +09:00
motor_test.pde Copter: Rename output_min() to enable_motor_output() 2015-05-01 14:30:44 +09:00
motors.pde Copter: Rename output_min() to enable_motor_output() 2015-05-01 14:30:44 +09:00
navigation.pde Copter: always update current_loc regardless of inav state 2015-02-12 15:00:56 +09:00
nocore.inoflag ArduCopter: add nocore.inoflag and Arduino.h 2012-12-20 14:51:40 +11:00
perf_info.pde Copter: make PERF info message into a STATUSTEXT message 2015-02-16 10:02:53 +11:00
position_vector.pde Copter: pv_location_to_vector use pv_alt_above_origin 2015-04-14 16:10:04 +09:00
radio.pde Copter: Rename output_min() to enable_motor_output() 2015-05-01 14:30:44 +09:00
readme.txt Copter: readme file renamed and directs to wiki 2014-02-12 21:03:45 +09:00
sensors.pde Copter: set motor air density ratio 2015-04-29 14:36:17 +09:00
setup.pde Copter: Update compass to the new interface 2015-03-13 18:46:16 +11:00
switches.pde Copter: Log Emergency Stop and Motor Interlock status 2015-05-01 14:30:43 +09:00
system.pde Copter: removed special cases for DCM gain changes on arm/disarm 2015-04-28 14:07:39 +10:00
takeoff.pde Copter: take-off uses PosControl's add_takeoff method 2015-05-01 12:56:32 +09:00
test.pde Copter: fix compile warnings by converting .f to .0f 2015-04-24 14:24:52 +09:00
tuning.pde Copter: Change CH6_Tuning #defines into Enum 2015-05-01 14:30:36 +09:00

readme.txt

ArduCopter README

User Manual: http://copter.ardupilot.com/
Developer Manual: http://dev.ardupilot.com/