ardupilot/libraries/AP_Compass/AP_Compass_AK8963.h

121 lines
3.5 KiB
C++

/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
#ifndef AP_Compass_AK8963_H
#define AP_Compass_AK8963_H
#include <AP_HAL/AP_HAL.h>
#include "../AP_Common/AP_Common.h"
#include "../AP_Math/AP_Math.h"
#include "Compass.h"
#include "AP_Compass_Backend.h"
class AP_AK8963_SerialBus
{
public:
struct PACKED raw_value {
int16_t val[3];
uint8_t st2;
};
virtual void register_read(uint8_t address, uint8_t *value, uint8_t count) = 0;
uint8_t register_read(uint8_t address) {
uint8_t reg;
register_read(address, &reg, 1);
return reg;
}
virtual void register_write(uint8_t address, uint8_t value) = 0;
virtual AP_HAL::Semaphore* get_semaphore() = 0;
virtual bool configure() = 0;
virtual bool start_measurements() = 0;
virtual void read_raw(struct raw_value *rv) = 0;
virtual uint32_t get_dev_id() = 0;
};
class AP_Compass_AK8963 : public AP_Compass_Backend
{
public:
AP_Compass_AK8963(Compass &compass, AP_AK8963_SerialBus *bus);
static AP_Compass_Backend *detect_mpu9250(Compass &compass);
static AP_Compass_Backend *detect_i2c1(Compass &compass);
bool init(void);
void read(void);
void accumulate(void);
private:
void _make_factory_sensitivity_adjustment(Vector3f& field) const;
Vector3f _get_filtered_field() const;
void _reset_filter();
bool _reset();
bool _setup_mode();
bool _check_id();
bool _calibrate();
void _update();
void _dump_registers();
bool _sem_take_blocking();
bool _sem_take_nonblocking();
bool _sem_give();
float _magnetometer_ASA[3] {0, 0, 0};
uint8_t _compass_instance;
float _mag_x_accum;
float _mag_y_accum;
float _mag_z_accum;
uint32_t _accum_count;
bool _initialized;
uint32_t _last_update_timestamp;
uint32_t _last_accum_time;
AP_AK8963_SerialBus *_bus;
AP_HAL::Semaphore *_bus_sem;
};
class AP_AK8963_SerialBus_MPU9250: public AP_AK8963_SerialBus
{
public:
AP_AK8963_SerialBus_MPU9250();
void register_read(uint8_t address, uint8_t *value, uint8_t count);
void register_write(uint8_t address, uint8_t value);
AP_HAL::Semaphore* get_semaphore();
bool configure();
bool start_measurements();
void read_raw(struct raw_value *rv);
uint32_t get_dev_id();
private:
void _read(uint8_t address, uint8_t *value, uint32_t count);
void _write(uint8_t address, const uint8_t *value, uint32_t count);
void _write(uint8_t address, const uint8_t value) {
_write(address, &value, 1);
}
AP_HAL::SPIDeviceDriver *_spi;
AP_HAL::Semaphore *_spi_sem;
};
class AP_AK8963_SerialBus_I2C: public AP_AK8963_SerialBus
{
public:
AP_AK8963_SerialBus_I2C(AP_HAL::I2CDriver *i2c, uint8_t addr);
void register_read(uint8_t address, uint8_t *value, uint8_t count);
void register_write(uint8_t address, uint8_t value);
AP_HAL::Semaphore* get_semaphore();
bool configure(){ return true; }
bool start_measurements() { return true; }
void read_raw(struct raw_value *rv);
uint32_t get_dev_id();
private:
void _read(uint8_t address, uint8_t *value, uint32_t count);
void _write(uint8_t address, const uint8_t *value, uint32_t count);
void _write(uint8_t address, const uint8_t value) {
_write(address, &value, 1);
}
AP_HAL::I2CDriver *_i2c;
AP_HAL::Semaphore *_i2c_sem;
uint8_t _addr;
};
#endif