mirror of https://github.com/ArduPilot/ardupilot
316 lines
7.7 KiB
C++
316 lines
7.7 KiB
C++
/*
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "AP_Baro_ICP101XX.h"
|
|
|
|
#if AP_BARO_ICP101XX_ENABLED
|
|
|
|
#include <AP_HAL/AP_HAL.h>
|
|
#include <AP_HAL/I2CDevice.h>
|
|
#include <utility>
|
|
|
|
#include <AP_Common/AP_Common.h>
|
|
#include <AP_HAL/AP_HAL.h>
|
|
#include <AP_Math/AP_Math.h>
|
|
#include <AP_BoardConfig/AP_BoardConfig.h>
|
|
|
|
#include <utility>
|
|
#include <stdio.h>
|
|
|
|
#include <AP_Math/AP_Math.h>
|
|
#include <AP_Logger/AP_Logger.h>
|
|
|
|
#include <AP_InertialSensor/AP_InertialSensor_Invensense_registers.h>
|
|
|
|
extern const AP_HAL::HAL &hal;
|
|
|
|
#define ICP101XX_ID 0x08
|
|
#define CMD_READ_ID 0xefc8
|
|
#define CMD_SET_ADDR 0xc595
|
|
#define CMD_READ_OTP 0xc7f7
|
|
#define CMD_MEAS_LP 0x609c
|
|
#define CMD_MEAS_N 0x6825
|
|
#define CMD_MEAS_LN 0x70df
|
|
#define CMD_MEAS_ULN 0x7866
|
|
#define CMD_SOFT_RESET 0x805d
|
|
|
|
/*
|
|
constructor
|
|
*/
|
|
AP_Baro_ICP101XX::AP_Baro_ICP101XX(AP_Baro &baro, AP_HAL::OwnPtr<AP_HAL::I2CDevice> _dev)
|
|
: AP_Baro_Backend(baro)
|
|
, dev(std::move(_dev))
|
|
{
|
|
}
|
|
|
|
AP_Baro_Backend *AP_Baro_ICP101XX::probe(AP_Baro &baro,
|
|
AP_HAL::OwnPtr<AP_HAL::I2CDevice> dev)
|
|
{
|
|
if (!dev) {
|
|
return nullptr;
|
|
}
|
|
AP_Baro_ICP101XX *sensor = NEW_NOTHROW AP_Baro_ICP101XX(baro, std::move(dev));
|
|
if (!sensor || !sensor->init()) {
|
|
delete sensor;
|
|
return nullptr;
|
|
}
|
|
return sensor;
|
|
}
|
|
|
|
bool AP_Baro_ICP101XX::init()
|
|
{
|
|
if (!dev) {
|
|
return false;
|
|
}
|
|
|
|
dev->get_semaphore()->take_blocking();
|
|
|
|
uint16_t id = 0;
|
|
read_response(CMD_READ_ID, (uint8_t *)&id, 2);
|
|
uint8_t whoami = (id >> 8) & 0x3f; // Product ID Bits 5:0
|
|
if (whoami != ICP101XX_ID) {
|
|
goto failed;
|
|
}
|
|
|
|
if (!send_command(CMD_SOFT_RESET)) {
|
|
goto failed;
|
|
}
|
|
|
|
// wait for sensor to settle
|
|
hal.scheduler->delay(10);
|
|
|
|
if (!read_calibration_data()) {
|
|
goto failed;
|
|
}
|
|
|
|
// start a reading
|
|
if (!start_measure(CMD_MEAS_ULN)) {
|
|
goto failed;
|
|
}
|
|
|
|
dev->set_retries(0);
|
|
|
|
instance = _frontend.register_sensor();
|
|
|
|
dev->set_device_type(DEVTYPE_BARO_ICP101XX);
|
|
set_bus_id(instance, dev->get_bus_id());
|
|
|
|
dev->get_semaphore()->give();
|
|
|
|
dev->register_periodic_callback(measure_interval, FUNCTOR_BIND_MEMBER(&AP_Baro_ICP101XX::timer, void));
|
|
|
|
return true;
|
|
|
|
failed:
|
|
dev->get_semaphore()->give();
|
|
return false;
|
|
}
|
|
|
|
bool AP_Baro_ICP101XX::read_measure_results(uint8_t *buf, uint8_t len)
|
|
{
|
|
return dev->transfer(nullptr, 0, buf, len);
|
|
}
|
|
|
|
bool AP_Baro_ICP101XX::read_response(uint16_t cmd, uint8_t *buf, uint8_t len)
|
|
{
|
|
uint8_t buff[2];
|
|
buff[0] = (cmd >> 8) & 0xff;
|
|
buff[1] = cmd & 0xff;
|
|
return dev->transfer(&buff[0], 2, buf, len);
|
|
}
|
|
|
|
bool AP_Baro_ICP101XX::send_command(uint16_t cmd)
|
|
{
|
|
uint8_t buf[2];
|
|
buf[0] = (cmd >> 8) & 0xff;
|
|
buf[1] = cmd & 0xff;
|
|
return dev->transfer(buf, sizeof(buf), nullptr, 0);
|
|
}
|
|
|
|
bool AP_Baro_ICP101XX::send_command(uint16_t cmd, uint8_t *data, uint8_t len)
|
|
{
|
|
uint8_t buf[5];
|
|
buf[0] = (cmd >> 8) & 0xff;
|
|
buf[1] = cmd & 0xff;
|
|
memcpy(&buf[2], data, len);
|
|
return dev->transfer(&buf[0], len + 2, nullptr, 0);
|
|
}
|
|
|
|
int8_t AP_Baro_ICP101XX::cal_crc(uint8_t seed, uint8_t data)
|
|
{
|
|
int8_t poly = 0x31;
|
|
int8_t var2;
|
|
uint8_t i;
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
if ((seed & 0x80) ^ (data & 0x80)) {
|
|
var2 = 1;
|
|
|
|
} else {
|
|
var2 = 0;
|
|
}
|
|
|
|
seed = (seed & 0x7F) << 1;
|
|
data = (data & 0x7F) << 1;
|
|
seed = seed ^ (uint8_t)(poly * var2);
|
|
}
|
|
|
|
return (int8_t)seed;
|
|
}
|
|
|
|
bool AP_Baro_ICP101XX::read_calibration_data(void)
|
|
{
|
|
// setup for OTP read
|
|
uint8_t cmd[3] = { 0x00, 0x66, 0x9c };
|
|
if (!send_command(CMD_SET_ADDR, cmd, 3)) {
|
|
return false;
|
|
}
|
|
for (uint8_t i = 0; i < 4; i++) {
|
|
uint8_t d[3];
|
|
uint8_t crc = 0xff;
|
|
read_response(CMD_READ_OTP, d, 3);
|
|
for (int j = 0; j < 2; j++) {
|
|
crc = (uint8_t)cal_crc(crc, d[j]);
|
|
}
|
|
if (crc != d[2]) {
|
|
return false;
|
|
}
|
|
sensor_constants[i] = (d[0] << 8) | d[1];
|
|
}
|
|
return true;
|
|
}
|
|
|
|
bool AP_Baro_ICP101XX::start_measure(uint16_t mode)
|
|
{
|
|
/*
|
|
From ds-000186-icp-101xx-v1.0.pdf, page 6, table 1
|
|
|
|
Sensor Measurement Max Time
|
|
Mode Time (Forced)
|
|
Low Power (LP) 1.6 ms 1.8 ms
|
|
Normal (N) 5.6 ms 6.3 ms
|
|
Low Noise (LN) 20.8 ms 23.8 ms
|
|
Ultra Low Noise(ULN) 83.2 ms 94.5 ms
|
|
*/
|
|
|
|
switch (mode) {
|
|
case CMD_MEAS_LP:
|
|
measure_interval = 2000;
|
|
break;
|
|
|
|
case CMD_MEAS_LN:
|
|
measure_interval = 24000;
|
|
break;
|
|
|
|
case CMD_MEAS_ULN:
|
|
measure_interval = 95000;
|
|
break;
|
|
|
|
case CMD_MEAS_N:
|
|
default:
|
|
measure_interval = 7000;
|
|
break;
|
|
}
|
|
|
|
if (!send_command(mode)) {
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
void AP_Baro_ICP101XX::calculate_conversion_constants(const float p_Pa[3], const float p_LUT[3],
|
|
float &A, float &B, float &C)
|
|
{
|
|
C = (p_LUT[0] * p_LUT[1] * (p_Pa[0] - p_Pa[1]) +
|
|
p_LUT[1] * p_LUT[2] * (p_Pa[1] - p_Pa[2]) +
|
|
p_LUT[2] * p_LUT[0] * (p_Pa[2] - p_Pa[0])) /
|
|
(p_LUT[2] * (p_Pa[0] - p_Pa[1]) +
|
|
p_LUT[0] * (p_Pa[1] - p_Pa[2]) +
|
|
p_LUT[1] * (p_Pa[2] - p_Pa[0]));
|
|
A = (p_Pa[0] * p_LUT[0] - p_Pa[1] * p_LUT[1] - (p_Pa[1] - p_Pa[0]) * C) / (p_LUT[0] - p_LUT[1]);
|
|
B = (p_Pa[0] - A) * (p_LUT[0] + C);
|
|
}
|
|
|
|
/*
|
|
Convert an output from a calibrated sensor to a pressure in Pa.
|
|
Arguments:
|
|
p_LSB -- Raw pressure data from sensor
|
|
T_LSB -- Raw temperature data from sensor
|
|
*/
|
|
float AP_Baro_ICP101XX::get_pressure(uint32_t p_LSB, uint32_t T_LSB)
|
|
{
|
|
float t = T_LSB - 32768.0;
|
|
float s[3];
|
|
s[0] = LUT_lower + float(sensor_constants[0] * t * t) * quadr_factor;
|
|
s[1] = offst_factor * sensor_constants[3] + float(sensor_constants[1] * t * t) * quadr_factor;
|
|
s[2] = LUT_upper + float(sensor_constants[2] * t * t) * quadr_factor;
|
|
float A, B, C;
|
|
calculate_conversion_constants(p_Pa_calib, s, A, B, C);
|
|
return A + B / (C + p_LSB);
|
|
}
|
|
|
|
void AP_Baro_ICP101XX::convert_data(uint32_t Praw, uint32_t Traw)
|
|
{
|
|
// temperature is easy
|
|
float T = -45 + (175.0f / (1U<<16)) * Traw;
|
|
|
|
// pressure involves a few more calculations
|
|
float P = get_pressure(Praw, Traw);
|
|
|
|
if (!pressure_ok(P)) {
|
|
return;
|
|
}
|
|
|
|
WITH_SEMAPHORE(_sem);
|
|
|
|
accum.psum += P;
|
|
accum.tsum += T;
|
|
accum.count++;
|
|
}
|
|
|
|
void AP_Baro_ICP101XX::timer(void)
|
|
{
|
|
uint8_t d[9] {};
|
|
if (read_measure_results(d, 9)) {
|
|
// ignore CRC bytes for now
|
|
uint32_t Traw = (uint32_t(d[0]) << 8) | d[1];
|
|
uint32_t Praw = (uint32_t(d[3]) << 16) | (uint32_t(d[4]) << 8) | d[6];
|
|
|
|
convert_data(Praw, Traw);
|
|
start_measure(CMD_MEAS_ULN);
|
|
last_measure_us = AP_HAL::micros();
|
|
} else {
|
|
if (AP_HAL::micros() - last_measure_us > measure_interval*3) {
|
|
// lost a sample
|
|
start_measure(CMD_MEAS_ULN);
|
|
last_measure_us = AP_HAL::micros();
|
|
}
|
|
}
|
|
}
|
|
|
|
void AP_Baro_ICP101XX::update()
|
|
{
|
|
WITH_SEMAPHORE(_sem);
|
|
|
|
if (accum.count > 0) {
|
|
_copy_to_frontend(instance, accum.psum/accum.count, accum.tsum/accum.count);
|
|
accum.psum = accum.tsum = 0;
|
|
accum.count = 0;
|
|
}
|
|
}
|
|
|
|
#endif // AP_BARO_ICP101XX_ENABLED
|