Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-04 23:18:28 -04:00
Code Issues Packages Projects Releases Wiki Activity
1f65bb537f
ardupilot/libraries/AP_Motors/AP_MotorsHeli.cpp
Randy Mackay 1f65bb537f TradHeli: add get_pilot_desired_collective 
Perhaps this should be moved to the main code's heli.pde sketch
2013-11-15 22:57:51 +09:00

619 lines
22 KiB
C++
Raw Blame History

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* AP_MotorsHeli.cpp - ArduCopter motors library
* Code by RandyMackay. DIYDrones.com
*
*/
#include <stdlib.h>
#include <AP_HAL.h>
#include "AP_MotorsHeli.h"
extern const AP_HAL::HAL& hal;
const AP_Param::GroupInfo AP_MotorsHeli::var_info[] PROGMEM = {
// @Param: SV1_POS
// @DisplayName: Servo 1 Position
// @Description: Angular location of swash servo #1
// @Range: -180 180
// @Units: Degrees
// @User: Standard
// @Increment: 1
AP_GROUPINFO("SV1_POS", 1, AP_MotorsHeli, _servo1_pos, AP_MOTORS_HELI_SERVO1_POS),
// @Param: SV2_POS
// @DisplayName: Servo 2 Position
// @Description: Angular location of swash servo #2
// @Range: -180 180
// @Units: Degrees
// @User: Standard
// @Increment: 1
AP_GROUPINFO("SV2_POS", 2, AP_MotorsHeli, _servo2_pos, AP_MOTORS_HELI_SERVO2_POS),
// @Param: SV3_POS
// @DisplayName: Servo 3 Position
// @Description: Angular location of swash servo #3
// @Range: -180 180
// @Units: Degrees
// @User: Standard
// @Increment: 1
AP_GROUPINFO("SV3_POS", 3, AP_MotorsHeli, _servo3_pos, AP_MOTORS_HELI_SERVO3_POS),
// @Param: ROL_MAX
// @DisplayName: Swash Roll Angle Max
// @Description: Maximum roll angle of the swash plate
// @Range: 0 18000
// @Units: Centi-Degrees
// @Increment: 100
// @User: Advanced
AP_GROUPINFO("ROL_MAX", 4, AP_MotorsHeli, _roll_max, AP_MOTORS_HELI_SWASH_ROLL_MAX),
// @Param: PIT_MAX
// @DisplayName: Swash Pitch Angle Max
// @Description: Maximum pitch angle of the swash plate
// @Range: 0 18000
// @Units: Centi-Degrees
// @Increment: 100
// @User: Advanced
AP_GROUPINFO("PIT_MAX", 5, AP_MotorsHeli, _pitch_max, AP_MOTORS_HELI_SWASH_PITCH_MAX),
// @Param: COL_MIN
// @DisplayName: Collective Pitch Minimum
// @Description: Lowest possible servo position for the swashplate
// @Range: 1000 2000
// @Units: PWM
// @Increment: 1
// @User: Standard
AP_GROUPINFO("COL_MIN", 6, AP_MotorsHeli, _collective_min, AP_MOTORS_HELI_COLLECTIVE_MIN),
// @Param: COL_MAX
// @DisplayName: Collective Pitch Maximum
// @Description: Highest possible servo position for the swashplate
// @Range: 1000 2000
// @Units: PWM
// @Increment: 1
// @User: Standard
AP_GROUPINFO("COL_MAX", 7, AP_MotorsHeli, _collective_max, AP_MOTORS_HELI_COLLECTIVE_MAX),
// @Param: COL_MID
// @DisplayName: Collective Pitch Mid-Point
// @Description: Swash servo position corresponding to zero collective pitch (or zero lift for Assymetrical blades)
// @Range: 1000 2000
// @Units: PWM
// @Increment: 1
// @User: Standard
AP_GROUPINFO("COL_MID", 8, AP_MotorsHeli, _collective_mid, AP_MOTORS_HELI_COLLECTIVE_MID),
// @Param: GYR_ENABLE
// @DisplayName: External Gyro Enabled
// @Description: Enabled/Disable an external rudder gyro connected to channel 7. With no external gyro a more complex yaw controller is used
// @Values: 0:Disabled,1:Enabled
// @User: Standard
AP_GROUPINFO("GYR_ENABLE",9, AP_MotorsHeli, _ext_gyro_enabled, 0),
// @Param: SWASH_TYPE
// @DisplayName: Swash Type
// @Description: Swash Type Setting - either 3-servo CCPM or H1 Mechanical Mixing
// @Values: 0:3-Servo CCPM, 1:H1 Mechanical Mixing
// @User: Standard
AP_GROUPINFO("SWASH_TYPE",10, AP_MotorsHeli, _swash_type, AP_MOTORS_HELI_SWASH_CCPM),
// @Param: GYR_GAIN
// @DisplayName: External Gyro Gain
// @Description: PWM sent to the external gyro on Ch7
// @Range: 1000 2000
// @Units: PWM
// @Increment: 10
// @User: Standard
AP_GROUPINFO("GYR_GAIN",11, AP_MotorsHeli, _ext_gyro_gain, AP_MOTORS_HELI_EXT_GYRO_GAIN),
// @Param: SV_MAN
// @DisplayName: Manual Servo Mode
// @Description: Pass radio inputs directly to servos for set-up. Do not set this manually!
// @Values: 0:Disabled,1:Enabled
// @User: Standard
AP_GROUPINFO("SV_MAN", 12, AP_MotorsHeli, _servo_manual, 0),
// @Param: PHANG
// @DisplayName: Swashplate Phase Angle Compensation
// @Description: Phase angle correction for rotor head. If pitching the swash forward induces a roll, this can be correct the problem
// @Range: -90 90
// @Units: Degrees
// @User: Advanced
// @Increment: 1
AP_GROUPINFO("PHANG", 13, AP_MotorsHeli, _phase_angle, 0),
// @Param: COLYAW
// @DisplayName: Collective-Yaw Mixing
// @Description: Feed-forward compensation to automatically add rudder input when collective pitch is increased. Can be positive or negative depending on mechanics.
// @Range: -10 10
AP_GROUPINFO("COLYAW", 14, AP_MotorsHeli, _collective_yaw_effect, 0),
// @Param: GOV_SETPOINT
// @DisplayName: External Motor Governor Setpoint
// @Description: PWM passed to the external motor governor when external governor is enabled
// @Range: 1000 2000
// @Units: PWM
// @Increment: 10
// @User: Standard
AP_GROUPINFO("GOV_SETPOINT", 15, AP_MotorsHeli, _ext_gov_setpoint, AP_MOTORS_HELI_EXT_GOVERNOR_SETPOINT),
// @Param: RSC_MODE
// @DisplayName: Rotor Speed Control Mode
// @Description: Which main rotor ESC control mode is active
// @Values: 0:None, 1:Ch8 passthrough, 2:External Governor
// @User: Standard
AP_GROUPINFO("RSC_MODE", 16, AP_MotorsHeli, _rsc_mode, AP_MOTORS_HELI_RSC_MODE_CH8_PASSTHROUGH),
// @Param: RSC_RATE
// @DisplayName: RSC Ramp Rate
// @Description: The time in 100th seconds the RSC takes to ramp up to speed
// @Range: 0 6000
// @Units: 100ths of Seconds
// @User: Standard
AP_GROUPINFO("RSC_RATE", 17, AP_MotorsHeli, _rsc_ramp_up_rate, AP_MOTORS_HELI_RSC_RATE),
// @Param: FLYBAR_MODE
// @DisplayName: Flybar Mode Selector
// @Description: Flybar present or not. Affects attitude controller used during ACRO flight mode
// @Range: 0:NoFlybar 1:Flybar
// @User: Standard
AP_GROUPINFO("FLYBAR_MODE", 18, AP_MotorsHeli, _flybar_mode, AP_MOTORS_HELI_NOFLYBAR),
// @Param: STAB_COL_MIN
// @DisplayName: Stabilize Throttle Minimum
// @Description: Minimum collective position while pilot directly controls collective
// @Range: 0 50
// @Units: Percent
// @Increment: 1
// @User: Standard
AP_GROUPINFO("STAB_COL_MIN", 19, AP_MotorsHeli, _manual_collective_min, AP_MOTORS_HELI_MANUAL_COLLECTIVE_MIN),
// @Param: STAB_COL_MAX
// @DisplayName: Stabilize Throttle Maximum
// @Description: Maximum collective position while pilot directly controls collective
// @Range: 50 100
// @Units: Percent
// @Increment: 1
// @User: Standard
AP_GROUPINFO("STAB_COL_MAX", 20, AP_MotorsHeli, _manual_collective_max, AP_MOTORS_HELI_MANUAL_COLLECTIVE_MAX),
AP_GROUPEND
};
//
// public methods
//
// init
void AP_MotorsHeli::Init()
{
// set update rate
set_update_rate(_speed_hz);
// ensure inputs are not passed through to servos
_servo_manual = 0;
// initialise swash plate
init_swash();
}
// set update rate to motors - a value in hertz
void AP_MotorsHeli::set_update_rate( uint16_t speed_hz )
{
// record requested speed
_speed_hz = speed_hz;
// setup fast channels
uint32_t mask =
1U << _motor_to_channel_map[AP_MOTORS_MOT_1] |
1U << _motor_to_channel_map[AP_MOTORS_MOT_2] |
1U << _motor_to_channel_map[AP_MOTORS_MOT_3] |
1U << _motor_to_channel_map[AP_MOTORS_MOT_4];
hal.rcout->set_freq(mask, _speed_hz);
}
// enable - starts allowing signals to be sent to motors
void AP_MotorsHeli::enable()
{
// enable output channels
hal.rcout->enable_ch(_motor_to_channel_map[AP_MOTORS_MOT_1]); // swash servo 1
hal.rcout->enable_ch(_motor_to_channel_map[AP_MOTORS_MOT_2]); // swash servo 2
hal.rcout->enable_ch(_motor_to_channel_map[AP_MOTORS_MOT_3]); // swash servo 3
hal.rcout->enable_ch(_motor_to_channel_map[AP_MOTORS_MOT_4]); // yaw
hal.rcout->enable_ch(AP_MOTORS_HELI_EXT_GYRO); // for external gyro
hal.rcout->enable_ch(AP_MOTORS_HELI_EXT_RSC); // for external RSC
}
// output_min - sends minimum values out to the motors
void AP_MotorsHeli::output_min()
{
// move swash to mid
move_swash(0,0,500,0);
}
// output_test - wiggle servos in order to show connections are correct
void AP_MotorsHeli::output_test()
{
int16_t i;
// Send minimum values to all motors
output_min();
// servo 1
for( i=0; i<5; i++ ) {
hal.rcout->write(_motor_to_channel_map[AP_MOTORS_MOT_1], _servo_1->radio_trim + 100);
hal.scheduler->delay(300);
hal.rcout->write(_motor_to_channel_map[AP_MOTORS_MOT_1], _servo_1->radio_trim - 100);
hal.scheduler->delay(300);
hal.rcout->write(_motor_to_channel_map[AP_MOTORS_MOT_1], _servo_1->radio_trim + 0);
hal.scheduler->delay(300);
}
// servo 2
for( i=0; i<5; i++ ) {
hal.rcout->write(_motor_to_channel_map[AP_MOTORS_MOT_2], _servo_2->radio_trim + 100);
hal.scheduler->delay(300);
hal.rcout->write(_motor_to_channel_map[AP_MOTORS_MOT_2], _servo_2->radio_trim - 100);
hal.scheduler->delay(300);
hal.rcout->write(_motor_to_channel_map[AP_MOTORS_MOT_2], _servo_2->radio_trim + 0);
hal.scheduler->delay(300);
}
// servo 3
for( i=0; i<5; i++ ) {
hal.rcout->write(_motor_to_channel_map[AP_MOTORS_MOT_3], _servo_3->radio_trim + 100);
hal.scheduler->delay(300);
hal.rcout->write(_motor_to_channel_map[AP_MOTORS_MOT_3], _servo_3->radio_trim - 100);
hal.scheduler->delay(300);
hal.rcout->write(_motor_to_channel_map[AP_MOTORS_MOT_3], _servo_3->radio_trim + 0);
hal.scheduler->delay(300);
}
// external gyro
if (_ext_gyro_enabled) {
hal.rcout->write(AP_MOTORS_HELI_EXT_GYRO, _ext_gyro_gain);
}
// servo 4
for( i=0; i<5; i++ ) {
hal.rcout->write(_motor_to_channel_map[AP_MOTORS_MOT_4], _servo_4->radio_trim + 100);
hal.scheduler->delay(300);
hal.rcout->write(_motor_to_channel_map[AP_MOTORS_MOT_4], _servo_4->radio_trim - 100);
hal.scheduler->delay(300);
hal.rcout->write(_motor_to_channel_map[AP_MOTORS_MOT_4], _servo_4->radio_trim + 0);
hal.scheduler->delay(300);
}
// Send minimum values to all motors
output_min();
}
// allow_arming - returns true if main rotor is spinning and it is ok to arm
bool AP_MotorsHeli::allow_arming()
{
// ensure main rotor has started
if (_rsc_mode != AP_MOTORS_HELI_RSC_MODE_NONE && _rc_8->control_in >= 10) {
return false;
}
// all other cases it is ok to arm
return true;
}
// get_pilot_desired_collective - converts pilot input (from 0 ~ 1000) to a value that can be fed into the move_swash function
int16_t AP_MotorsHeli::get_pilot_desired_collective(int16_t control_in)
{
// return immediately if reduce collective range for manual flight has not been configured
if (_manual_collective_min == 0 && _manual_collective_max == 100) {
return control_in;
}
// scale
int16_t collective_out;
collective_out = _manual_collective_min*10 + control_in * _collective_scalar_manual;
collective_out = constrain_int16(collective_out, 0, 1000);
return collective_out;
}
//
// protected methods
//
// output_armed - sends commands to the motors
void AP_MotorsHeli::output_armed()
{
// if manual override (i.e. when setting up swash), pass pilot commands straight through to swash
if (_servo_manual == 1) {
_rc_roll->servo_out = _rc_roll->control_in;
_rc_pitch->servo_out = _rc_pitch->control_in;
_rc_throttle->servo_out = _rc_throttle->control_in;
_rc_yaw->servo_out = _rc_yaw->control_in;
}
//static int counter = 0;
_rc_roll->calc_pwm();
_rc_pitch->calc_pwm();
_rc_throttle->calc_pwm();
_rc_yaw->calc_pwm();
move_swash( _rc_roll->servo_out, _rc_pitch->servo_out, _rc_throttle->servo_out, _rc_yaw->servo_out );
rsc_control();
}
// output_disarmed - sends commands to the motors
void AP_MotorsHeli::output_disarmed()
{
// for helis - armed or disarmed we allow servos to move
output_armed();
}
//
// private methods
//
// reset_swash - free up swash for maximum movements. Used for set-up
void AP_MotorsHeli::reset_swash()
{
// free up servo ranges
_servo_1->radio_min = 1000;
_servo_1->radio_max = 2000;
_servo_2->radio_min = 1000;
_servo_2->radio_max = 2000;
_servo_3->radio_min = 1000;
_servo_3->radio_max = 2000;
// calculate factors based on swash type and servo position
calculate_roll_pitch_collective_factors();
// set roll, pitch and throttle scaling
_roll_scaler = 1.0f;
_pitch_scaler = 1.0f;
_collective_scalar = ((float)(_rc_throttle->radio_max - _rc_throttle->radio_min))/1000.0f;
_collective_scalar_manual = 1.0f;
// we must be in set-up mode so mark swash as uninitialised
_heliflags.swash_initialised = false;
}
// init_swash - initialise the swash plate
void AP_MotorsHeli::init_swash()
{
// swash servo initialisation
_servo_1->set_range(0,1000);
_servo_2->set_range(0,1000);
_servo_3->set_range(0,1000);
_servo_4->set_angle(4500);
// range check collective min, max and mid
if( _collective_min >= _collective_max ) {
_collective_min = 1000;
_collective_max = 2000;
}
_collective_mid = constrain_int16(_collective_mid, _collective_min, _collective_max);
// calculate collective mid point as a number from 0 to 1000
_collective_mid_pwm = ((float)(_collective_mid-_collective_min))/((float)(_collective_max-_collective_min))*1000.0f;
// determine roll, pitch and collective input scaling
_roll_scaler = (float)_roll_max/4500.0f;
_pitch_scaler = (float)_pitch_max/4500.0f;
_collective_scalar = ((float)(_collective_max-_collective_min))/1000.0f;
_collective_scalar_manual = ((float)(_manual_collective_max - _manual_collective_min))/100.0f;
// calculate factors based on swash type and servo position
calculate_roll_pitch_collective_factors();
// servo min/max values
_servo_1->radio_min = 1000;
_servo_1->radio_max = 2000;
_servo_2->radio_min = 1000;
_servo_2->radio_max = 2000;
_servo_3->radio_min = 1000;
_servo_3->radio_max = 2000;
// mark swash as initialised
_heliflags.swash_initialised = true;
}
// calculate_roll_pitch_collective_factors - calculate factors based on swash type and servo position
void AP_MotorsHeli::calculate_roll_pitch_collective_factors()
{
if (_swash_type == AP_MOTORS_HELI_SWASH_CCPM) { //CCPM Swashplate, perform control mixing
// roll factors
_rollFactor[CH_1] = cosf(radians(_servo1_pos + 90 - _phase_angle));
_rollFactor[CH_2] = cosf(radians(_servo2_pos + 90 - _phase_angle));
_rollFactor[CH_3] = cosf(radians(_servo3_pos + 90 - _phase_angle));
// pitch factors
_pitchFactor[CH_1] = cosf(radians(_servo1_pos - _phase_angle));
_pitchFactor[CH_2] = cosf(radians(_servo2_pos - _phase_angle));
_pitchFactor[CH_3] = cosf(radians(_servo3_pos - _phase_angle));
// collective factors
_collectiveFactor[CH_1] = 1;
_collectiveFactor[CH_2] = 1;
_collectiveFactor[CH_3] = 1;
}else{ //H1 Swashplate, keep servo outputs seperated
// roll factors
_rollFactor[CH_1] = 1;
_rollFactor[CH_2] = 0;
_rollFactor[CH_3] = 0;
// pitch factors
_pitchFactor[CH_1] = 0;
_pitchFactor[CH_2] = 1;
_pitchFactor[CH_3] = 0;
// collective factors
_collectiveFactor[CH_1] = 0;
_collectiveFactor[CH_2] = 0;
_collectiveFactor[CH_3] = 1;
}
}
//
// heli_move_swash - moves swash plate to attitude of parameters passed in
// - expected ranges:
// roll : -4500 ~ 4500
// pitch: -4500 ~ 4500
// collective: 0 ~ 1000
// yaw: -4500 ~ 4500
//
void AP_MotorsHeli::move_swash(int16_t roll_out, int16_t pitch_out, int16_t coll_in, int16_t yaw_out)
{
int16_t yaw_offset = 0;
int16_t coll_out_scaled;
if (_servo_manual == 1) { // are we in manual servo mode? (i.e. swash set-up mode)?
// check if we need to free up the swash
if (_heliflags.swash_initialised) {
reset_swash();
}
coll_out_scaled = coll_in * _collective_scalar + _rc_throttle->radio_min - 1000;
}else{ // regular flight mode
// check if we need to reinitialise the swash
if (!_heliflags.swash_initialised) {
init_swash();
}
// rescale roll_out and pitch-out into the min and max ranges to provide linear motion
// across the input range instead of stopping when the input hits the constrain value
// these calculations are based on an assumption of the user specified roll_max and pitch_max
// coming into this equation at 4500 or less, and based on the original assumption of the
// total _servo_x.servo_out range being -4500 to 4500.
roll_out = roll_out * _roll_scaler;
roll_out = constrain_int16(roll_out, (int16_t)-_roll_max, (int16_t)_roll_max);
pitch_out = pitch_out * _pitch_scaler;
pitch_out = constrain_int16(pitch_out, (int16_t)-_pitch_max, (int16_t)_pitch_max);
// scale collective pitch
_collective_out = constrain_int16(coll_in, 0, 1000);
coll_out_scaled = _collective_out * _collective_scalar + _collective_min - 1000;
// rudder feed forward based on collective
if (!_ext_gyro_enabled) {
yaw_offset = _collective_yaw_effect * abs(coll_out_scaled - _collective_mid_pwm);
}
}
// swashplate servos
_servo_1->servo_out = (_rollFactor[CH_1] * roll_out + _pitchFactor[CH_1] * pitch_out)/10 + _collectiveFactor[CH_1] * coll_out_scaled + (_servo_1->radio_trim-1500);
_servo_2->servo_out = (_rollFactor[CH_2] * roll_out + _pitchFactor[CH_2] * pitch_out)/10 + _collectiveFactor[CH_2] * coll_out_scaled + (_servo_2->radio_trim-1500);
if (_swash_type == AP_MOTORS_HELI_SWASH_H1) {
_servo_1->servo_out += 500;
_servo_2->servo_out += 500;
}
_servo_3->servo_out = (_rollFactor[CH_3] * roll_out + _pitchFactor[CH_3] * pitch_out)/10 + _collectiveFactor[CH_3] * coll_out_scaled + (_servo_3->radio_trim-1500);
_servo_4->servo_out = yaw_out + yaw_offset;
// use servo_out to calculate pwm_out and radio_out
_servo_1->calc_pwm();
_servo_2->calc_pwm();
_servo_3->calc_pwm();
_servo_4->calc_pwm();
// actually move the servos
hal.rcout->write(_motor_to_channel_map[AP_MOTORS_MOT_1], _servo_1->radio_out);
hal.rcout->write(_motor_to_channel_map[AP_MOTORS_MOT_2], _servo_2->radio_out);
hal.rcout->write(_motor_to_channel_map[AP_MOTORS_MOT_3], _servo_3->radio_out);
hal.rcout->write(_motor_to_channel_map[AP_MOTORS_MOT_4], _servo_4->radio_out);
// to be compatible with other frame types
motor_out[AP_MOTORS_MOT_1] = _servo_1->radio_out;
motor_out[AP_MOTORS_MOT_2] = _servo_2->radio_out;
motor_out[AP_MOTORS_MOT_3] = _servo_3->radio_out;
motor_out[AP_MOTORS_MOT_4] = _servo_4->radio_out;
// output gyro value
if (_ext_gyro_enabled) {
hal.rcout->write(AP_MOTORS_HELI_EXT_GYRO, _ext_gyro_gain);
}
}
static long map(long x, long in_min, long in_max, long out_min, long out_max)
{
return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
}
// rsc_control - update value to send to main rotor's ESC
void AP_MotorsHeli::rsc_control()
{
if (armed() && (_rsc_ramp >= _rsc_ramp_up_rate)){ // rsc_ramp will never increase if rsc_mode = 0
if (_motor_runup_timer < AP_MOTORS_HELI_MOTOR_RUNUP_TIME){ // therefore motor_runup_complete can never be true
_motor_runup_timer++;
} else {
_heliflags.motor_runup_complete = true;
}
} else {
_heliflags.motor_runup_complete = false; // motor_runup_complete will go to false if we
_motor_runup_timer = 0; // disarm or wind down the motor
}
switch (_rsc_mode) {
case AP_MOTORS_HELI_RSC_MODE_CH8_PASSTHROUGH:
if( armed() && (_rc_8->radio_in > (_rc_8->radio_min + 10))) {
if (_rsc_ramp < _rsc_ramp_up_rate) {
_rsc_ramp++;
_rsc_output = map(_rsc_ramp, 0, _rsc_ramp_up_rate, _rc_8->radio_min, _rc_8->radio_in);
} else {
_rsc_output = _rc_8->radio_in;
}
} else {
_rsc_ramp--; //Return RSC Ramp to 0 slowly, allowing for "warm restart"
if (_rsc_ramp < 0) {
_rsc_ramp = 0;
}
_rsc_output = _rc_8->radio_min;
}
hal.rcout->write(AP_MOTORS_HELI_EXT_RSC, _rsc_output);
break;
case AP_MOTORS_HELI_RSC_MODE_EXT_GOVERNOR:
if (armed() && _rc_8->control_in > 100) {
if (_rsc_ramp < _rsc_ramp_up_rate) {
_rsc_ramp++;
_rsc_output = map(_rsc_ramp, 0, _rsc_ramp_up_rate, 1000, _ext_gov_setpoint);
} else {
_rsc_output = _ext_gov_setpoint;
}
} else {
_rsc_ramp--; //Return RSC Ramp to 0 slowly, allowing for "warm restart"
if (_rsc_ramp < 0) {
_rsc_ramp = 0;
}
_rsc_output = 1000; //Just to be sure RSC output is 0
}
hal.rcout->write(AP_MOTORS_HELI_EXT_RSC, _rsc_output);
break;
default:
break;
}
}
Reference in New Issue View Git Blame Copy Permalink