mirror of https://github.com/ArduPilot/ardupilot
353 lines
13 KiB
C++
353 lines
13 KiB
C++
#include "Plane.h"
|
|
|
|
// set the nav_controller pointer to the right controller
|
|
void Plane::set_nav_controller(void)
|
|
{
|
|
switch ((AP_Navigation::ControllerType)g.nav_controller.get()) {
|
|
|
|
default:
|
|
case AP_Navigation::CONTROLLER_DEFAULT:
|
|
// no break, fall through to L1 as default controller
|
|
|
|
case AP_Navigation::CONTROLLER_L1:
|
|
nav_controller = &L1_controller;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
reset the total loiter angle
|
|
*/
|
|
void Plane::loiter_angle_reset(void)
|
|
{
|
|
loiter.sum_cd = 0;
|
|
loiter.total_cd = 0;
|
|
loiter.reached_target_alt = false;
|
|
loiter.unable_to_acheive_target_alt = false;
|
|
}
|
|
|
|
/*
|
|
update the total angle we have covered in a loiter. Used to support
|
|
commands to do N circles of loiter
|
|
*/
|
|
void Plane::loiter_angle_update(void)
|
|
{
|
|
static const int32_t lap_check_interval_cd = 3*36000;
|
|
|
|
const int32_t target_bearing_cd = nav_controller->target_bearing_cd();
|
|
int32_t loiter_delta_cd;
|
|
|
|
if (loiter.sum_cd == 0 && !reached_loiter_target()) {
|
|
// we don't start summing until we are doing the real loiter
|
|
loiter_delta_cd = 0;
|
|
} else if (loiter.sum_cd == 0) {
|
|
// use 1 cd for initial delta
|
|
loiter_delta_cd = 1;
|
|
loiter.start_lap_alt_cm = current_loc.alt;
|
|
loiter.next_sum_lap_cd = lap_check_interval_cd;
|
|
} else {
|
|
loiter_delta_cd = target_bearing_cd - loiter.old_target_bearing_cd;
|
|
}
|
|
|
|
loiter.old_target_bearing_cd = target_bearing_cd;
|
|
loiter_delta_cd = wrap_180_cd(loiter_delta_cd);
|
|
loiter.sum_cd += loiter_delta_cd * loiter.direction;
|
|
|
|
if (labs(current_loc.alt - next_WP_loc.alt) < 500) {
|
|
loiter.reached_target_alt = true;
|
|
loiter.unable_to_acheive_target_alt = false;
|
|
loiter.next_sum_lap_cd = loiter.sum_cd + lap_check_interval_cd;
|
|
|
|
} else if (!loiter.reached_target_alt && labs(loiter.sum_cd) >= loiter.next_sum_lap_cd) {
|
|
// check every few laps for scenario where up/downdrafts inhibit you from loitering up/down for too long
|
|
loiter.unable_to_acheive_target_alt = labs(current_loc.alt - loiter.start_lap_alt_cm) < 500;
|
|
loiter.start_lap_alt_cm = current_loc.alt;
|
|
loiter.next_sum_lap_cd += lap_check_interval_cd;
|
|
}
|
|
}
|
|
|
|
//****************************************************************
|
|
// Function that will calculate the desired direction to fly and distance
|
|
//****************************************************************
|
|
void Plane::navigate()
|
|
{
|
|
// allow change of nav controller mid-flight
|
|
set_nav_controller();
|
|
|
|
// do not navigate with corrupt data
|
|
// ---------------------------------
|
|
if (!have_position) {
|
|
return;
|
|
}
|
|
|
|
if (next_WP_loc.lat == 0 && next_WP_loc.lng == 0) {
|
|
return;
|
|
}
|
|
|
|
// waypoint distance from plane
|
|
// ----------------------------
|
|
auto_state.wp_distance = get_distance(current_loc, next_WP_loc);
|
|
auto_state.wp_proportion = location_path_proportion(current_loc,
|
|
prev_WP_loc, next_WP_loc);
|
|
SpdHgt_Controller->set_path_proportion(auto_state.wp_proportion);
|
|
|
|
// update total loiter angle
|
|
loiter_angle_update();
|
|
|
|
// control mode specific updates to navigation demands
|
|
// ---------------------------------------------------
|
|
update_navigation();
|
|
}
|
|
|
|
void Plane::calc_airspeed_errors()
|
|
{
|
|
float airspeed_measured = 0;
|
|
|
|
// we use the airspeed estimate function not direct sensor as TECS
|
|
// may be using synthetic airspeed
|
|
ahrs.airspeed_estimate(&airspeed_measured);
|
|
|
|
// FBW_B/cruise airspeed target
|
|
if (!failsafe.rc_failsafe && (control_mode == FLY_BY_WIRE_B || control_mode == CRUISE)) {
|
|
if (g2.flight_options & FlightOptions::CRUISE_TRIM_THROTTLE) {
|
|
float control_min = 0.0f;
|
|
float control_mid = 0.0f;
|
|
const float control_max = channel_throttle->get_range();
|
|
const float control_in = channel_throttle->get_control_in();
|
|
switch (channel_throttle->get_type()) {
|
|
case RC_Channel::RC_CHANNEL_TYPE_ANGLE:
|
|
control_min = -control_max;
|
|
break;
|
|
case RC_Channel::RC_CHANNEL_TYPE_RANGE:
|
|
control_mid = channel_throttle->get_control_mid();
|
|
break;
|
|
}
|
|
if (control_in <= control_mid) {
|
|
target_airspeed_cm = linear_interpolate(aparm.airspeed_min * 100, aparm.airspeed_cruise_cm,
|
|
control_in,
|
|
control_min, control_mid);
|
|
} else {
|
|
target_airspeed_cm = linear_interpolate(aparm.airspeed_cruise_cm, aparm.airspeed_max * 100,
|
|
control_in,
|
|
control_mid, control_max);
|
|
}
|
|
} else {
|
|
target_airspeed_cm = ((int32_t)(aparm.airspeed_max - aparm.airspeed_min) *
|
|
channel_throttle->get_control_in()) + ((int32_t)aparm.airspeed_min * 100);
|
|
}
|
|
|
|
} else if (flight_stage == AP_Vehicle::FixedWing::FLIGHT_LAND) {
|
|
// Landing airspeed target
|
|
target_airspeed_cm = landing.get_target_airspeed_cm();
|
|
|
|
} else {
|
|
// Normal airspeed target
|
|
target_airspeed_cm = aparm.airspeed_cruise_cm;
|
|
}
|
|
|
|
// Set target to current airspeed + ground speed undershoot,
|
|
// but only when this is faster than the target airspeed commanded
|
|
// above.
|
|
if (auto_throttle_mode &&
|
|
aparm.min_gndspeed_cm > 0 &&
|
|
control_mode != CIRCLE) {
|
|
int32_t min_gnd_target_airspeed = airspeed_measured*100 + groundspeed_undershoot;
|
|
if (min_gnd_target_airspeed > target_airspeed_cm) {
|
|
target_airspeed_cm = min_gnd_target_airspeed;
|
|
}
|
|
}
|
|
|
|
// Bump up the target airspeed based on throttle nudging
|
|
if (throttle_allows_nudging && airspeed_nudge_cm > 0) {
|
|
target_airspeed_cm += airspeed_nudge_cm;
|
|
}
|
|
|
|
// Apply airspeed limit
|
|
if (target_airspeed_cm > (aparm.airspeed_max * 100))
|
|
target_airspeed_cm = (aparm.airspeed_max * 100);
|
|
|
|
// use the TECS view of the target airspeed for reporting, to take
|
|
// account of the landing speed
|
|
airspeed_error = SpdHgt_Controller->get_target_airspeed() - airspeed_measured;
|
|
}
|
|
|
|
void Plane::calc_gndspeed_undershoot()
|
|
{
|
|
// Use the component of ground speed in the forward direction
|
|
// This prevents flyaway if wind takes plane backwards
|
|
if (gps.status() >= AP_GPS::GPS_OK_FIX_2D) {
|
|
Vector2f gndVel = ahrs.groundspeed_vector();
|
|
const Matrix3f &rotMat = ahrs.get_rotation_body_to_ned();
|
|
Vector2f yawVect = Vector2f(rotMat.a.x,rotMat.b.x);
|
|
if (!yawVect.is_zero()) {
|
|
yawVect.normalize();
|
|
float gndSpdFwd = yawVect * gndVel;
|
|
groundspeed_undershoot = (aparm.min_gndspeed_cm > 0) ? (aparm.min_gndspeed_cm - gndSpdFwd*100) : 0;
|
|
}
|
|
} else {
|
|
groundspeed_undershoot = 0;
|
|
}
|
|
}
|
|
|
|
void Plane::update_loiter(uint16_t radius)
|
|
{
|
|
if (radius <= 1) {
|
|
// if radius is <=1 then use the general loiter radius. if it's small, use default
|
|
radius = (abs(aparm.loiter_radius) <= 1) ? LOITER_RADIUS_DEFAULT : abs(aparm.loiter_radius);
|
|
if (next_WP_loc.flags.loiter_ccw == 1) {
|
|
loiter.direction = -1;
|
|
} else {
|
|
loiter.direction = (aparm.loiter_radius < 0) ? -1 : 1;
|
|
}
|
|
}
|
|
|
|
if (loiter.start_time_ms != 0 &&
|
|
quadplane.guided_mode_enabled()) {
|
|
if (!auto_state.vtol_loiter) {
|
|
auto_state.vtol_loiter = true;
|
|
// reset loiter start time, so we don't consider the point
|
|
// reached till we get much closer
|
|
loiter.start_time_ms = 0;
|
|
quadplane.guided_start();
|
|
}
|
|
} else if ((loiter.start_time_ms == 0 &&
|
|
(control_mode == AUTO || control_mode == GUIDED) &&
|
|
auto_state.crosstrack &&
|
|
get_distance(current_loc, next_WP_loc) > radius*3) ||
|
|
(control_mode == RTL && quadplane.available() && quadplane.rtl_mode == 1)) {
|
|
/*
|
|
if never reached loiter point and using crosstrack and somewhat far away from loiter point
|
|
navigate to it like in auto-mode for normal crosstrack behavior
|
|
|
|
we also use direct waypoint navigation if we are a quadplane
|
|
that is going to be switching to QRTL when it gets within
|
|
RTL_RADIUS
|
|
*/
|
|
nav_controller->update_waypoint(prev_WP_loc, next_WP_loc);
|
|
} else {
|
|
nav_controller->update_loiter(next_WP_loc, radius, loiter.direction);
|
|
}
|
|
|
|
if (loiter.start_time_ms == 0) {
|
|
if (reached_loiter_target() ||
|
|
auto_state.wp_proportion > 1) {
|
|
// we've reached the target, start the timer
|
|
loiter.start_time_ms = millis();
|
|
if (control_mode == GUIDED || control_mode == AVOID_ADSB) {
|
|
// starting a loiter in GUIDED means we just reached the target point
|
|
gcs().send_mission_item_reached_message(0);
|
|
}
|
|
if (quadplane.guided_mode_enabled()) {
|
|
quadplane.guided_start();
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
handle CRUISE mode, locking heading to GPS course when we have
|
|
sufficient ground speed, and no aileron or rudder input
|
|
*/
|
|
void Plane::update_cruise()
|
|
{
|
|
if (!cruise_state.locked_heading &&
|
|
channel_roll->get_control_in() == 0 &&
|
|
rudder_input() == 0 &&
|
|
gps.status() >= AP_GPS::GPS_OK_FIX_2D &&
|
|
gps.ground_speed() >= 3 &&
|
|
cruise_state.lock_timer_ms == 0) {
|
|
// user wants to lock the heading - start the timer
|
|
cruise_state.lock_timer_ms = millis();
|
|
}
|
|
if (cruise_state.lock_timer_ms != 0 &&
|
|
(millis() - cruise_state.lock_timer_ms) > 500) {
|
|
// lock the heading after 0.5 seconds of zero heading input
|
|
// from user
|
|
cruise_state.locked_heading = true;
|
|
cruise_state.lock_timer_ms = 0;
|
|
cruise_state.locked_heading_cd = gps.ground_course_cd();
|
|
prev_WP_loc = current_loc;
|
|
}
|
|
if (cruise_state.locked_heading) {
|
|
next_WP_loc = prev_WP_loc;
|
|
// always look 1km ahead
|
|
location_update(next_WP_loc,
|
|
cruise_state.locked_heading_cd*0.01f,
|
|
get_distance(prev_WP_loc, current_loc) + 1000);
|
|
nav_controller->update_waypoint(prev_WP_loc, next_WP_loc);
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
handle speed and height control in FBWB or CRUISE mode.
|
|
In this mode the elevator is used to change target altitude. The
|
|
throttle is used to change target airspeed or throttle
|
|
*/
|
|
void Plane::update_fbwb_speed_height(void)
|
|
{
|
|
uint32_t now = micros();
|
|
if (now - target_altitude.last_elev_check_us >= 100000) {
|
|
// we don't run this on every loop as it would give too small granularity on quadplanes at 300Hz, and
|
|
// give below 1cm altitude change, which would result in no climb or descent
|
|
float dt = (now - target_altitude.last_elev_check_us) * 1.0e-6;
|
|
dt = constrain_float(dt, 0.1, 0.15);
|
|
|
|
target_altitude.last_elev_check_us = now;
|
|
|
|
float elevator_input = channel_pitch->get_control_in() / 4500.0f;
|
|
|
|
if (g.flybywire_elev_reverse) {
|
|
elevator_input = -elevator_input;
|
|
}
|
|
|
|
int32_t alt_change_cm = g.flybywire_climb_rate * elevator_input * dt * 100;
|
|
change_target_altitude(alt_change_cm);
|
|
|
|
if (is_zero(elevator_input) && !is_zero(target_altitude.last_elevator_input)) {
|
|
// the user has just released the elevator, lock in
|
|
// the current altitude
|
|
set_target_altitude_current();
|
|
}
|
|
|
|
target_altitude.last_elevator_input = elevator_input;
|
|
}
|
|
|
|
check_fbwb_minimum_altitude();
|
|
|
|
altitude_error_cm = calc_altitude_error_cm();
|
|
|
|
calc_throttle();
|
|
calc_nav_pitch();
|
|
}
|
|
|
|
/*
|
|
calculate the turn angle for the next leg of the mission
|
|
*/
|
|
void Plane::setup_turn_angle(void)
|
|
{
|
|
int32_t next_ground_course_cd = mission.get_next_ground_course_cd(-1);
|
|
if (next_ground_course_cd == -1) {
|
|
// the mission library can't determine a turn angle, assume 90 degrees
|
|
auto_state.next_turn_angle = 90.0f;
|
|
} else {
|
|
// get the heading of the current leg
|
|
int32_t ground_course_cd = get_bearing_cd(prev_WP_loc, next_WP_loc);
|
|
|
|
// work out the angle we need to turn through
|
|
auto_state.next_turn_angle = wrap_180_cd(next_ground_course_cd - ground_course_cd) * 0.01f;
|
|
}
|
|
}
|
|
|
|
/*
|
|
see if we have reached our loiter target
|
|
*/
|
|
bool Plane::reached_loiter_target(void)
|
|
{
|
|
if (quadplane.in_vtol_auto()) {
|
|
return auto_state.wp_distance < 3;
|
|
}
|
|
return nav_controller->reached_loiter_target();
|
|
}
|
|
|