mirror of https://github.com/ArduPilot/ardupilot
75 lines
3.7 KiB
C++
75 lines
3.7 KiB
C++
#include <AP_Common/AP_Common.h>
|
|
#include "AP_Relay_Params.h"
|
|
|
|
const AP_Param::GroupInfo AP_Relay_Params::var_info[] = {
|
|
// @Param: FUNCTION
|
|
// @DisplayName: Relay function
|
|
// @Description: The function the relay channel is mapped to.
|
|
// @Values{Copter, Rover, Plane, Blimp,Sub}: 0:None
|
|
// @Values{Copter, Rover, Plane, Blimp,Sub}: 1:Relay
|
|
// @Values{Plane}: 2:Ignition
|
|
// @Values{Plane, Copter}: 3:Parachute
|
|
// @Values{Copter, Rover, Plane, Blimp,Sub}: 4:Camera
|
|
// @Values{Rover}: 5:Bushed motor reverse 1 throttle or throttle-left or omni motor 1
|
|
// @Values{Rover}: 6:Bushed motor reverse 2 throttle-right or omni motor 2
|
|
// @Values{Rover}: 7:Bushed motor reverse 3 omni motor 3
|
|
// @Values{Rover}: 8:Bushed motor reverse 4 omni motor 4
|
|
// @Values{Plane}: 9:ICE Starter
|
|
// @Values{AP_Periph}: 10: DroneCAN Hardpoint ID 0
|
|
// @Values{AP_Periph}: 11: DroneCAN Hardpoint ID 1
|
|
// @Values{AP_Periph}: 12: DroneCAN Hardpoint ID 2
|
|
// @Values{AP_Periph}: 13: DroneCAN Hardpoint ID 3
|
|
// @Values{AP_Periph}: 14: DroneCAN Hardpoint ID 4
|
|
// @Values{AP_Periph}: 15: DroneCAN Hardpoint ID 5
|
|
// @Values{AP_Periph}: 16: DroneCAN Hardpoint ID 6
|
|
// @Values{AP_Periph}: 17: DroneCAN Hardpoint ID 7
|
|
// @Values{AP_Periph}: 18: DroneCAN Hardpoint ID 8
|
|
// @Values{AP_Periph}: 19: DroneCAN Hardpoint ID 9
|
|
// @Values{AP_Periph}: 20: DroneCAN Hardpoint ID 10
|
|
// @Values{AP_Periph}: 21: DroneCAN Hardpoint ID 11
|
|
// @Values{AP_Periph}: 22: DroneCAN Hardpoint ID 12
|
|
// @Values{AP_Periph}: 23: DroneCAN Hardpoint ID 13
|
|
// @Values{AP_Periph}: 24: DroneCAN Hardpoint ID 14
|
|
// @Values{AP_Periph}: 25: DroneCAN Hardpoint ID 15
|
|
|
|
// @User: Standard
|
|
AP_GROUPINFO_FLAGS("FUNCTION", 1, AP_Relay_Params, function, (float)FUNCTION::NONE, AP_PARAM_FLAG_ENABLE),
|
|
|
|
// @Param: PIN
|
|
// @DisplayName: Relay pin
|
|
// @Description: Digital pin number for relay control. Some common values are given, but see the Wiki's "GPIOs" page for how to determine the pin number for a given autopilot.
|
|
// @Values: -1:Disabled,49:BB Blue GP0 pin 4,50:AUXOUT1,51:AUXOUT2,52:AUXOUT3,53:AUXOUT4,54:AUXOUT5,55:AUXOUT6,57:BB Blue GP0 pin 3,113:BB Blue GP0 pin 6,116:BB Blue GP0 pin 5,62:BBBMini Pin P8.13,101:MainOut1,102:MainOut2,103:MainOut3,104:MainOut4,105:MainOut5,106:MainOut6,107:MainOut7,108:MainOut8
|
|
// @Values: 1000: DroneCAN Hardpoint ID 0
|
|
// @Values: 1001: DroneCAN Hardpoint ID 1
|
|
// @Values: 1002: DroneCAN Hardpoint ID 2
|
|
// @Values: 1003: DroneCAN Hardpoint ID 3
|
|
// @Values: 1004: DroneCAN Hardpoint ID 4
|
|
// @Values: 1005: DroneCAN Hardpoint ID 5
|
|
// @Values: 1006: DroneCAN Hardpoint ID 6
|
|
// @Values: 1007: DroneCAN Hardpoint ID 7
|
|
// @Values: 1008: DroneCAN Hardpoint ID 8
|
|
// @Values: 1009: DroneCAN Hardpoint ID 9
|
|
// @Values: 1010: DroneCAN Hardpoint ID 10
|
|
// @Values: 1011: DroneCAN Hardpoint ID 11
|
|
// @Values: 1012: DroneCAN Hardpoint ID 12
|
|
// @Values: 1013: DroneCAN Hardpoint ID 13
|
|
// @Values: 1014: DroneCAN Hardpoint ID 14
|
|
// @Values: 1015: DroneCAN Hardpoint ID 15
|
|
// @User: Standard
|
|
AP_GROUPINFO("PIN", 2, AP_Relay_Params, pin, -1),
|
|
|
|
// @Param: DEFAULT
|
|
// @DisplayName: Relay default state
|
|
// @Description: Should the relay default to on or off, this only applies to RELAYx_FUNC "Relay" (1). All other uses will pick the appropriate default output state from within the controlling function's parameters.
|
|
// @Values: 0: Off,1:On,2:NoChange
|
|
// @User: Standard
|
|
AP_GROUPINFO("DEFAULT", 3, AP_Relay_Params, default_state, (float)DefaultState::OFF),
|
|
|
|
AP_GROUPEND
|
|
|
|
};
|
|
|
|
AP_Relay_Params::AP_Relay_Params(void) {
|
|
AP_Param::setup_object_defaults(this, var_info);
|
|
}
|