Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
ardupilot/ArduPlane/Parameters.h

476 lines
14 KiB
C++
Raw Blame History

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
#ifndef PARAMETERS_H
#define PARAMETERS_H
#include <AP_Common.h>
// Global parameter class.
//
class Parameters {
public:
/*
* The value of k_format_version determines whether the existing
* eeprom data is considered valid. You should only change this
* value under the following circumstances:
*
* 1) the meaning of an existing eeprom parameter changes
*
* 2) the value of an existing k_param_* enum value changes
*
* Adding a new parameter should _not_ require a change to
* k_format_version except under special circumstances. If you
* change it anyway then all ArduPlane users will need to reload all
* their parameters. We want that to be an extremely rare
* thing. Please do not just change it "just in case".
*
* To determine if a k_param_* value has changed, use the rules of
* C++ enums to work out the value of the neighboring enum
* values. If you don't know the C++ enum rules then please ask for
* help.
*/
//////////////////////////////////////////////////////////////////
// STOP!!! DO NOT CHANGE THIS VALUE UNTIL YOU FULLY UNDERSTAND THE
// COMMENTS ABOVE. IF UNSURE, ASK ANOTHER DEVELOPER!!!
static const uint16_t k_format_version = 13;
//////////////////////////////////////////////////////////////////
// The parameter software_type is set up solely for ground station use
// and identifies the software type (eg ArduPilotMega versus ArduCopterMega)
// GCS will interpret values 0-9 as ArduPilotMega. Developers may use
// values within that range to identify different branches.
//
static const uint16_t k_software_type = 0; // 0 for APM trunk
enum {
// Layout version number, always key zero.
//
k_param_format_version = 0,
k_param_software_type,
k_param_num_resets,
// Misc
//
k_param_auto_trim = 10,
k_param_log_bitmask_old, // unused
k_param_pitch_trim_cd,
k_param_mix_mode,
k_param_reverse_elevons,
k_param_reverse_ch1_elevon,
k_param_reverse_ch2_elevon,
k_param_flap_1_percent,
k_param_flap_1_speed,
k_param_flap_2_percent,
k_param_flap_2_speed,
k_param_reset_switch_chan,
k_param_manual_level, // unused
k_param_land_pitch_cd,
k_param_ins_old, // *** Deprecated, remove with next eeprom number change
k_param_stick_mixing,
k_param_reset_mission_chan,
k_param_land_flare_alt,
k_param_land_flare_sec,
k_param_crosstrack_min_distance, // unused
k_param_rudder_steer, // unused
k_param_throttle_nudge,
k_param_alt_offset,
k_param_ins, // libraries/AP_InertialSensor variables
k_param_takeoff_throttle_min_speed,
k_param_takeoff_throttle_min_accel,
k_param_takeoff_heading_hold, // unused
k_param_level_roll_limit,
k_param_hil_servos,
k_param_vtail_output,
k_param_nav_controller,
k_param_elevon_output,
k_param_att_controller,
k_param_mixing_gain,
k_param_scheduler,
k_param_relay,
k_param_takeoff_throttle_delay,
k_param_skip_gyro_cal,
k_param_auto_fbw_steer,
k_param_waypoint_max_radius,
k_param_ground_steer_alt,
k_param_ground_steer_dps,
k_param_rally_limit_km,
k_param_hil_err_limit,
k_param_sonar,
k_param_log_bitmask,
k_param_BoardConfig,
k_param_rssi_range,
k_param_flapin_channel,
k_param_flaperon_output,
// 100: Arming parameters
k_param_arming = 100,
// 105: Extra parameters
k_param_fence_retalt = 105,
// 110: Telemetry control
//
k_param_gcs0 = 110, // stream rates for uartA
k_param_gcs1, // stream rates for uartC
k_param_sysid_this_mav,
k_param_sysid_my_gcs,
k_param_serial1_baud,
k_param_telem_delay,
k_param_serial0_baud,
k_param_gcs2, // stream rates for uartD
k_param_serial2_baud,
// 120: Fly-by-wire control
//
k_param_airspeed_min = 120,
k_param_airspeed_max,
k_param_FBWB_min_altitude_cm, // 0=disabled, minimum value for altitude in cm (for first time try 30 meters = 3000 cm)
k_param_flybywire_elev_reverse,
k_param_alt_control_algorithm,
k_param_flybywire_climb_rate,
k_param_acro_roll_rate,
k_param_acro_pitch_rate,
k_param_acro_locking,
//
// 130: Sensor parameters
//
k_param_imu = 130, // unused
k_param_altitude_mix,
k_param_compass_enabled,
k_param_compass,
k_param_battery_monitoring, // unused
k_param_volt_div_ratio, // unused
k_param_curr_amp_per_volt, // unused
k_param_input_voltage, // deprecated, can be deleted
k_param_pack_capacity, // unused
k_param_sonar_enabled,
k_param_ahrs, // AHRS group
k_param_barometer, // barometer ground calibration
k_param_airspeed, // AP_Airspeed parameters
k_param_curr_amp_offset,
//
// 150: Navigation parameters
//
k_param_crosstrack_gain = 150, // unused
k_param_crosstrack_entry_angle, // unused
k_param_roll_limit_cd,
k_param_pitch_limit_max_cd,
k_param_pitch_limit_min_cd,
k_param_airspeed_cruise_cm,
k_param_RTL_altitude_cm,
k_param_inverted_flight_ch,
k_param_min_gndspeed_cm,
k_param_crosstrack_use_wind, // unused
//
// Camera and mount parameters
//
k_param_camera = 160,
k_param_camera_mount,
k_param_camera_mount2,
//
// Battery monitoring parameters
//
k_param_battery = 166,
k_param_rssi_pin,
k_param_battery_volt_pin, // unused
k_param_battery_curr_pin, // unused - 169
//
// 170: Radio settings
//
k_param_rc_1 = 170,
k_param_rc_2,
k_param_rc_3,
k_param_rc_4,
k_param_rc_5,
k_param_rc_6,
k_param_rc_7,
k_param_rc_8,
k_param_rc_9,
k_param_rc_10,
k_param_rc_11,
k_param_throttle_min,
k_param_throttle_max,
k_param_throttle_fs_enabled,
k_param_throttle_fs_value,
k_param_throttle_cruise,
k_param_short_fs_action,
k_param_long_fs_action,
k_param_gcs_heartbeat_fs_enabled,
k_param_throttle_slewrate,
k_param_throttle_suppress_manual,
k_param_throttle_passthru_stabilize,
k_param_rc_12,
k_param_fs_batt_voltage,
k_param_fs_batt_mah,
k_param_short_fs_timeout,
k_param_long_fs_timeout,
//
// 200: Feed-forward gains
//
k_param_kff_pitch_compensation = 200, // unused
k_param_kff_rudder_mix,
k_param_kff_pitch_to_throttle, // unused
k_param_kff_throttle_to_pitch,
k_param_scaling_speed,
//
// 210: flight modes
//
k_param_flight_mode_channel = 210,
k_param_flight_mode1,
k_param_flight_mode2,
k_param_flight_mode3,
k_param_flight_mode4,
k_param_flight_mode5,
k_param_flight_mode6,
//
// 220: Waypoint data
//
k_param_waypoint_mode = 220,
k_param_command_total,
k_param_command_index,
k_param_waypoint_radius,
k_param_loiter_radius,
k_param_fence_action,
k_param_fence_total,
k_param_fence_channel,
k_param_fence_minalt,
k_param_fence_maxalt,
// other objects
k_param_sitl = 230,
k_param_obc,
k_param_rollController,
k_param_pitchController,
k_param_yawController,
k_param_L1_controller,
k_param_rcmap,
k_param_TECS_controller,
k_param_rally_total,
k_param_steerController,
//
// 240: PID Controllers
k_param_pidNavRoll = 240, // unused
k_param_pidServoRoll, // unused
k_param_pidServoPitch, // unused
k_param_pidNavPitchAirspeed, // unused
k_param_pidServoRudder, // unused
k_param_pidTeThrottle, // unused
k_param_pidNavPitchAltitude, // unused
k_param_pidWheelSteer, // unused
// 254,255: reserved
};
AP_Int16 format_version;
AP_Int8 software_type;
// Telemetry control
//
AP_Int16 sysid_this_mav;
AP_Int16 sysid_my_gcs;
AP_Int8 serial0_baud;
AP_Int8 serial1_baud;
#if MAVLINK_COMM_NUM_BUFFERS > 2
AP_Int8 serial2_baud;
#endif
AP_Int8 telem_delay;
#if HIL_MODE != HIL_MODE_DISABLED
AP_Float hil_err_limit;
#endif
// Feed-forward gains
//
AP_Float kff_rudder_mix;
AP_Float kff_pitch_to_throttle;
AP_Float kff_throttle_to_pitch;
AP_Float ground_steer_alt;
AP_Int16 ground_steer_dps;
// speed used for speed scaling
AP_Float scaling_speed;
// navigation controller type. See AP_Navigation::ControllerType
AP_Int8 nav_controller;
// attitude controller type.
AP_Int8 att_controller;
// skip gyro calibration
AP_Int8 skip_gyro_cal;
AP_Int8 auto_fbw_steer;
// Estimation
//
AP_Float altitude_mix;
AP_Int8 alt_control_algorithm;
// Waypoints
//
AP_Int8 waypoint_mode;
AP_Int8 command_total;
AP_Int8 command_index;
AP_Int16 waypoint_radius;
AP_Int16 waypoint_max_radius;
AP_Int16 loiter_radius;
#if GEOFENCE_ENABLED == ENABLED
AP_Int8 fence_action;
AP_Int8 fence_total;
AP_Int8 fence_channel;
AP_Int16 fence_minalt; // meters
AP_Int16 fence_maxalt; // meters
AP_Int16 fence_retalt; // meters
#endif
AP_Int8 rally_total;
AP_Float rally_limit_km;
// Fly-by-wire
//
AP_Int8 flybywire_elev_reverse;
AP_Int8 flybywire_climb_rate;
// Throttle
//
AP_Int8 throttle_suppress_manual;
AP_Int8 throttle_passthru_stabilize;
AP_Int8 throttle_fs_enabled;
AP_Int16 throttle_fs_value;
AP_Int8 throttle_nudge;
// Failsafe
AP_Int8 short_fs_action;
AP_Int8 long_fs_action;
AP_Float short_fs_timeout;
AP_Float long_fs_timeout;
AP_Int8 gcs_heartbeat_fs_enabled;
AP_Float fs_batt_voltage;
AP_Float fs_batt_mah;
// Flight modes
//
AP_Int8 flight_mode_channel;
AP_Int8 flight_mode1;
AP_Int8 flight_mode2;
AP_Int8 flight_mode3;
AP_Int8 flight_mode4;
AP_Int8 flight_mode5;
AP_Int8 flight_mode6;
// Navigational maneuvering limits
//
AP_Int16 roll_limit_cd;
AP_Int16 alt_offset;
AP_Int16 acro_roll_rate;
AP_Int16 acro_pitch_rate;
AP_Int8 acro_locking;
// Misc
//
AP_Int8 auto_trim;
AP_Int8 mix_mode;
AP_Int8 vtail_output;
AP_Int8 elevon_output;
AP_Float mixing_gain;
AP_Int8 reverse_elevons;
AP_Int8 reverse_ch1_elevon;
AP_Int8 reverse_ch2_elevon;
AP_Int16 num_resets;
AP_Int32 log_bitmask;
AP_Int8 reset_switch_chan;
AP_Int8 reset_mission_chan;
AP_Int32 airspeed_cruise_cm;
AP_Int32 RTL_altitude_cm;
AP_Int16 land_pitch_cd;
AP_Float land_flare_alt;
AP_Float land_flare_sec;
AP_Int32 min_gndspeed_cm;
AP_Int16 pitch_trim_cd;
AP_Int16 FBWB_min_altitude_cm;
#if HIL_MODE != HIL_MODE_DISABLED
AP_Int8 hil_servos;
#endif
AP_Int8 compass_enabled;
AP_Int8 flap_1_percent;
AP_Int8 flap_1_speed;
AP_Int8 flap_2_percent;
AP_Int8 flap_2_speed;
AP_Int8 rssi_pin;
AP_Float rssi_range; // allows to set max voltage for rssi pin such as 5.0, 3.3 etc.
AP_Int8 inverted_flight_ch; // 0=disabled, 1-8 is channel for inverted flight trigger
AP_Int8 stick_mixing;
AP_Float takeoff_throttle_min_speed;
AP_Float takeoff_throttle_min_accel;
AP_Int8 takeoff_throttle_delay;
AP_Int8 level_roll_limit;
AP_Int8 flapin_channel;
AP_Int8 flaperon_output;
// RC channels
RC_Channel rc_1;
RC_Channel rc_2;
RC_Channel rc_3;
RC_Channel rc_4;
RC_Channel_aux rc_5;
RC_Channel_aux rc_6;
RC_Channel_aux rc_7;
RC_Channel_aux rc_8;
#if CONFIG_HAL_BOARD == HAL_BOARD_PX4
RC_Channel_aux rc_9;
#endif
#if CONFIG_HAL_BOARD == HAL_BOARD_APM2 || CONFIG_HAL_BOARD == HAL_BOARD_PX4
RC_Channel_aux rc_10;
RC_Channel_aux rc_11;
#endif
#if CONFIG_HAL_BOARD == HAL_BOARD_PX4
RC_Channel_aux rc_12;
#endif
uint8_t _dummy;
Parameters() :
// variable default
//----------------------------------------
rc_1 (CH_1),
rc_2 (CH_2),
rc_3 (CH_3),
rc_4 (CH_4),
rc_5 (CH_5),
rc_6 (CH_6),
rc_7 (CH_7),
rc_8 (CH_8),
#if CONFIG_HAL_BOARD == HAL_BOARD_PX4
rc_9 (CH_9),
#endif
#if CONFIG_HAL_BOARD == HAL_BOARD_APM2 || CONFIG_HAL_BOARD == HAL_BOARD_PX4
rc_10 (CH_10),
rc_11 (CH_11),
#endif
#if CONFIG_HAL_BOARD == HAL_BOARD_PX4
rc_12 (CH_12),
#endif
_dummy(0)
{}
};
extern const AP_Param::Info var_info[];
#endif // PARAMETERS_H
Reference in New Issue View Git Blame Copy Permalink