ardupilot/libraries/AP_GPS/GPS.cpp

156 lines
3.9 KiB
C++

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: t -*-
#include <FastSerial.h>
#define GPS_DEBUGGING 0
#if GPS_DEBUGGING
#include <FastSerial.h>
# define Debug(fmt, args ...) do {Serial.printf("%s:%d: " fmt "\n", __FUNCTION__, __LINE__, ## args); delay(0); } while(0)
#else
# define Debug(fmt, args ...)
#endif
#include <AP_Common.h>
#include <AP_Math.h>
#include "GPS.h"
#if defined(ARDUINO) && ARDUINO >= 100
#include "Arduino.h"
#else
#include "WProgram.h"
#endif
void
GPS::update(void)
{
bool result;
uint32_t tnow;
// call the GPS driver to process incoming data
result = read();
tnow = millis();
// if we did not get a message, and the idle timer has expired, re-init
if (!result) {
if ((tnow - _idleTimer) > idleTimeout) {
Debug("gps read timeout %lu %lu", (unsigned long)tnow, (unsigned long)_idleTimer);
_status = NO_GPS;
init(_nav_setting);
// reset the idle timer
_idleTimer = tnow;
}
} else {
// we got a message, update our status correspondingly
_status = fix ? GPS_OK : NO_FIX;
valid_read = true;
new_data = true;
// reset the idle timer
_idleTimer = tnow;
if (_status == GPS_OK) {
last_fix_time = _idleTimer;
_last_ground_speed_cm = ground_speed;
if (_have_raw_velocity) {
// the GPS is able to give us velocity numbers directly
_velocity_north = _vel_north * 0.01;
_velocity_east = _vel_east * 0.01;
} else {
float gps_heading = ToRad(ground_course * 0.01);
float gps_speed = ground_speed * 0.01;
float sin_heading, cos_heading;
cos_heading = cos(gps_heading);
sin_heading = sin(gps_heading);
_velocity_north = gps_speed * cos_heading;
_velocity_east = gps_speed * sin_heading;
}
}
}
}
void
GPS::setHIL(uint32_t _time, float _latitude, float _longitude, float _altitude,
float _ground_speed, float _ground_course, float _speed_3d, uint8_t _num_sats)
{
}
// XXX this is probably the wrong way to do it, too
void
GPS::_error(const char *msg)
{
Serial.println(msg);
}
///
/// write a block of configuration data to a GPS
///
void GPS::_write_progstr_block(Stream *_fs, const prog_char *pstr, uint8_t size)
{
while (size--) {
_fs->write(pgm_read_byte(pstr++));
}
}
/*
a prog_char block queue, used to send out config commands to a GPS
in 16 byte chunks. This saves us having to have a 128 byte GPS send
buffer, while allowing us to avoid a long delay in sending GPS init
strings while waiting for the GPS auto detection to happen
*/
// maximum number of pending progstrings
#define PROGSTR_QUEUE_SIZE 3
struct progstr_queue {
const prog_char *pstr;
uint8_t ofs, size;
};
static struct {
FastSerial *fs;
uint8_t queue_size;
uint8_t idx, next_idx;
struct progstr_queue queue[PROGSTR_QUEUE_SIZE];
} progstr_state;
void GPS::_send_progstr(Stream *_fs, const prog_char *pstr, uint8_t size)
{
progstr_state.fs = (FastSerial *)_fs;
struct progstr_queue *q = &progstr_state.queue[progstr_state.next_idx];
q->pstr = pstr;
q->size = size;
q->ofs = 0;
progstr_state.next_idx++;
if (progstr_state.next_idx == PROGSTR_QUEUE_SIZE) {
progstr_state.next_idx = 0;
}
}
void GPS::_update_progstr(void)
{
struct progstr_queue *q = &progstr_state.queue[progstr_state.idx];
// quick return if nothing to do
if (q->size == 0 || progstr_state.fs->tx_pending()) {
return;
}
uint8_t nbytes = q->size - q->ofs;
if (nbytes > 16) {
nbytes = 16;
}
_write_progstr_block(progstr_state.fs, q->pstr+q->ofs, nbytes);
q->ofs += nbytes;
if (q->ofs == q->size) {
q->size = 0;
progstr_state.idx++;
if (progstr_state.idx == PROGSTR_QUEUE_SIZE) {
progstr_state.idx = 0;
}
}
}