mirror of https://github.com/ArduPilot/ardupilot
84 lines
1.7 KiB
Plaintext
84 lines
1.7 KiB
Plaintext
# hw definition file for f405 Matek CAN GPS
|
|
|
|
# MCU class and specific type
|
|
MCU STM32F4xx STM32F405xx
|
|
|
|
# bootloader starts firmware at 64k
|
|
FLASH_RESERVE_START_KB 64
|
|
FLASH_SIZE_KB 1024
|
|
|
|
# store parameters in pages 2 and 3
|
|
STORAGE_FLASH_PAGE 2
|
|
define HAL_STORAGE_SIZE 15360
|
|
|
|
# board ID for firmware load
|
|
APJ_BOARD_ID 6002
|
|
|
|
define CAN_APP_NODE_NAME "sw-nav-f405"
|
|
|
|
env AP_PERIPH 1
|
|
|
|
define STM32_ST_USE_TIMER 5
|
|
define CH_CFG_ST_RESOLUTION 32
|
|
|
|
# crystal frequency
|
|
OSCILLATOR_HZ 8000000
|
|
|
|
# status light, normally disabled so as to not confuse nav light functionality
|
|
#PC4 LED OUTPUT LOW GPIO(0)
|
|
#define HAL_LED_ON 1
|
|
|
|
## debug
|
|
#PA13 JTMS-SWDIO SWD
|
|
#PA14 JTCK-SWCLK SWD
|
|
|
|
# we setup a small defaults.parm
|
|
define AP_PARAM_MAX_EMBEDDED_PARAM 256
|
|
|
|
# keep ROMFS uncompressed although we do have the runtime ram needed
|
|
env ROMFS_UNCOMPRESSED True
|
|
|
|
# i2c
|
|
I2C_ORDER I2C1
|
|
|
|
PB7 I2C1_SDA I2C1
|
|
PB6 I2C1_SCL I2C1
|
|
|
|
# can
|
|
PA11 CAN1_RX CAN1
|
|
PA12 CAN1_TX CAN1
|
|
PA15 GPIO_CAN1_SILENT OUTPUT PUSHPULL SPEED_LOW LOW
|
|
|
|
# disable serial
|
|
define HAL_USE_SERIAL FALSE
|
|
define HAL_NO_UARTDRIVER TRUE
|
|
|
|
define HAL_USE_ADC FALSE
|
|
|
|
# compass
|
|
define HAL_PERIPH_ENABLE_MAG
|
|
|
|
COMPASS MMC3416 I2C:0:0x30 false ROTATION_NONE
|
|
|
|
define HAL_COMPASS_MAX_SENSORS 1
|
|
|
|
# notify led
|
|
define HAL_PERIPH_ENABLE_NOTIFY
|
|
define HAL_PERIPH_ENABLE_RC_OUT
|
|
|
|
define DEFAULT_NTF_LED_TYPES 131072 # discrete rgb led (1 << 17)
|
|
|
|
define AP_NOTIFY_DISCRETE_RGB_ENABLED 1
|
|
PA3 LED_CTRL_VIS OUTPUT HIGH GPIO(1) # vis light power
|
|
PA1 LED_COLOR OUTPUT LOW GPIO(2) # red/green
|
|
PA2 LED_WHITE OUTPUT LOW GPIO(3) # white
|
|
PB0 LED_IR OUTPUT LOW GPIO(4) # IR
|
|
|
|
define DISCRETE_RGB_RED_PIN 3
|
|
define DISCRETE_RGB_GREEN_PIN 2
|
|
define DISCRETE_RGB_BLUE_PIN 4
|
|
define DISCRETE_RGB_POLARITY true
|
|
|
|
# don't build on firmware.ardupilot.org
|
|
AUTOBUILD_TARGETS None
|