mirror of https://github.com/ArduPilot/ardupilot
377 lines
13 KiB
C++
377 lines
13 KiB
C++
#include "Copter.h"
|
|
|
|
// Code to detect a crash main ArduCopter code
|
|
#define CRASH_CHECK_TRIGGER_SEC 2 // 2 seconds inverted indicates a crash
|
|
#define CRASH_CHECK_ANGLE_DEVIATION_DEG 30.0f // 30 degrees beyond target angle is signal we are out of control
|
|
#define CRASH_CHECK_ANGLE_MIN_DEG 15.0f // vehicle must be leaning at least 15deg to trigger crash check
|
|
#define CRASH_CHECK_SPEED_MAX 10.0f // vehicle must be moving at less than 10m/s to trigger crash check
|
|
#define CRASH_CHECK_ACCEL_MAX 3.0f // vehicle must be accelerating less than 3m/s/s to be considered crashed
|
|
|
|
// Code to detect a thrust loss main ArduCopter code
|
|
#define THRUST_LOSS_CHECK_TRIGGER_SEC 1 // 1 second descent while level and high throttle indicates thrust loss
|
|
#define THRUST_LOSS_CHECK_ANGLE_DEVIATION_CD 1500 // we can't expect to maintain altitude beyond 15 degrees on all aircraft
|
|
#define THRUST_LOSS_CHECK_MINIMUM_THROTTLE 0.9f // we can expect to maintain altitude above 90 % throttle
|
|
|
|
// Yaw imbalance check
|
|
#define YAW_IMBALANCE_IMAX_THRESHOLD 0.75f
|
|
#define YAW_IMBALANCE_WARN_MS 10000
|
|
|
|
// crash_check - disarms motors if a crash has been detected
|
|
// crashes are detected by the vehicle being more than 20 degrees beyond it's angle limits continuously for more than 1 second
|
|
// called at MAIN_LOOP_RATE
|
|
void Copter::crash_check()
|
|
{
|
|
static uint16_t crash_counter; // number of iterations vehicle may have been crashed
|
|
|
|
// return immediately if disarmed, or crash checking disabled
|
|
if (!motors->armed() || ap.land_complete || g.fs_crash_check == 0) {
|
|
crash_counter = 0;
|
|
return;
|
|
}
|
|
|
|
// exit immediately if in standby
|
|
if (standby_active) {
|
|
crash_counter = 0;
|
|
return;
|
|
}
|
|
|
|
// exit immediately if in force flying
|
|
if (force_flying && !flightmode->is_landing()) {
|
|
crash_counter = 0;
|
|
return;
|
|
}
|
|
|
|
// return immediately if we are not in an angle stabilize flight mode or we are flipping
|
|
if (flightmode->mode_number() == Mode::Number::ACRO || flightmode->mode_number() == Mode::Number::FLIP) {
|
|
crash_counter = 0;
|
|
return;
|
|
}
|
|
|
|
#if MODE_AUTOROTATE_ENABLED == ENABLED
|
|
//return immediately if in autorotation mode
|
|
if (flightmode->mode_number() == Mode::Number::AUTOROTATE) {
|
|
crash_counter = 0;
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
// vehicle not crashed if 1hz filtered acceleration is more than 3m/s (1G on Z-axis has been subtracted)
|
|
const float filtered_acc = land_accel_ef_filter.get().length();
|
|
if (filtered_acc >= CRASH_CHECK_ACCEL_MAX) {
|
|
crash_counter = 0;
|
|
return;
|
|
}
|
|
|
|
// check for lean angle over 15 degrees
|
|
const float lean_angle_deg = degrees(acosf(ahrs.cos_roll()*ahrs.cos_pitch()));
|
|
if (lean_angle_deg <= CRASH_CHECK_ANGLE_MIN_DEG) {
|
|
crash_counter = 0;
|
|
return;
|
|
}
|
|
|
|
// check for angle error over 30 degrees
|
|
const float angle_error = attitude_control->get_att_error_angle_deg();
|
|
if (angle_error <= CRASH_CHECK_ANGLE_DEVIATION_DEG) {
|
|
crash_counter = 0;
|
|
return;
|
|
}
|
|
|
|
// check for speed under 10m/s (if available)
|
|
Vector3f vel_ned;
|
|
if (ahrs.get_velocity_NED(vel_ned) && (vel_ned.length() >= CRASH_CHECK_SPEED_MAX)) {
|
|
crash_counter = 0;
|
|
return;
|
|
}
|
|
|
|
// we may be crashing
|
|
crash_counter++;
|
|
|
|
// check if crashing for 2 seconds
|
|
if (crash_counter >= (CRASH_CHECK_TRIGGER_SEC * scheduler.get_loop_rate_hz())) {
|
|
AP::logger().Write_Error(LogErrorSubsystem::CRASH_CHECK, LogErrorCode::CRASH_CHECK_CRASH);
|
|
// send message to gcs
|
|
gcs().send_text(MAV_SEVERITY_EMERGENCY,"Crash: Disarming: AngErr=%.0f>%.0f, Accel=%.1f<%.1f", angle_error, CRASH_CHECK_ANGLE_DEVIATION_DEG, filtered_acc, CRASH_CHECK_ACCEL_MAX);
|
|
// disarm motors
|
|
copter.arming.disarm(AP_Arming::Method::CRASH);
|
|
}
|
|
}
|
|
|
|
// check for loss of thrust and trigger thrust boost in motors library
|
|
void Copter::thrust_loss_check()
|
|
{
|
|
static uint16_t thrust_loss_counter; // number of iterations vehicle may have been crashed
|
|
|
|
// no-op if suppresed by flight options param
|
|
if ((copter.g2.flight_options & uint32_t(FlightOptions::DISABLE_THRUST_LOSS_CHECK)) != 0) {
|
|
return;
|
|
}
|
|
|
|
// exit immediately if thrust boost is already engaged
|
|
if (motors->get_thrust_boost()) {
|
|
return;
|
|
}
|
|
|
|
// return immediately if disarmed
|
|
if (!motors->armed() || ap.land_complete) {
|
|
thrust_loss_counter = 0;
|
|
return;
|
|
}
|
|
|
|
// exit immediately if in standby
|
|
if (standby_active) {
|
|
return;
|
|
}
|
|
|
|
// check for desired angle over 15 degrees
|
|
// todo: add thrust angle to AC_AttitudeControl
|
|
const Vector3f angle_target = attitude_control->get_att_target_euler_cd();
|
|
if (sq(angle_target.x) + sq(angle_target.y) > sq(THRUST_LOSS_CHECK_ANGLE_DEVIATION_CD)) {
|
|
thrust_loss_counter = 0;
|
|
return;
|
|
}
|
|
|
|
// check for throttle over 90% or throttle saturation
|
|
if ((attitude_control->get_throttle_in() < THRUST_LOSS_CHECK_MINIMUM_THROTTLE) && (!motors->limit.throttle_upper)) {
|
|
thrust_loss_counter = 0;
|
|
return;
|
|
}
|
|
|
|
// check throttle is over 25% to prevent checks triggering from thrust limitations caused by low commanded throttle
|
|
if ((attitude_control->get_throttle_in() < 0.25f)) {
|
|
thrust_loss_counter = 0;
|
|
return;
|
|
}
|
|
|
|
// check for descent
|
|
if (!is_negative(inertial_nav.get_velocity_z_up_cms())) {
|
|
thrust_loss_counter = 0;
|
|
return;
|
|
}
|
|
|
|
// check for angle error over 30 degrees to ensure the aircraft has attitude control
|
|
const float angle_error = attitude_control->get_att_error_angle_deg();
|
|
if (angle_error >= CRASH_CHECK_ANGLE_DEVIATION_DEG) {
|
|
thrust_loss_counter = 0;
|
|
return;
|
|
}
|
|
|
|
// the aircraft is descending with low requested roll and pitch, at full available throttle, with attitude control
|
|
// we may have lost thrust
|
|
thrust_loss_counter++;
|
|
|
|
// check if thrust loss for 1 second
|
|
if (thrust_loss_counter >= (THRUST_LOSS_CHECK_TRIGGER_SEC * scheduler.get_loop_rate_hz())) {
|
|
// reset counter
|
|
thrust_loss_counter = 0;
|
|
AP::logger().Write_Error(LogErrorSubsystem::THRUST_LOSS_CHECK, LogErrorCode::FAILSAFE_OCCURRED);
|
|
// send message to gcs
|
|
gcs().send_text(MAV_SEVERITY_EMERGENCY, "Potential Thrust Loss (%d)", (int)motors->get_lost_motor() + 1);
|
|
// enable thrust loss handling
|
|
motors->set_thrust_boost(true);
|
|
// the motors library disables this when it is no longer needed to achieve the commanded output
|
|
|
|
#if AP_GRIPPER_ENABLED
|
|
if ((copter.g2.flight_options & uint32_t(FlightOptions::RELEASE_GRIPPER_ON_THRUST_LOSS)) != 0) {
|
|
copter.g2.gripper.release();
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
|
|
// check for a large yaw imbalance, could be due to badly calibrated ESC or misaligned motors
|
|
void Copter::yaw_imbalance_check()
|
|
{
|
|
// no-op if suppresed by flight options param
|
|
if ((copter.g2.flight_options & uint32_t(FlightOptions::DISABLE_YAW_IMBALANCE_WARNING)) != 0) {
|
|
return;
|
|
}
|
|
|
|
// If I is disabled it is unlikely that the issue is not obvious
|
|
if (!is_positive(attitude_control->get_rate_yaw_pid().kI())) {
|
|
return;
|
|
}
|
|
|
|
// thrust loss is triggered, yaw issues are expected
|
|
if (motors->get_thrust_boost()) {
|
|
yaw_I_filt.reset(0.0f);
|
|
return;
|
|
}
|
|
|
|
// return immediately if disarmed
|
|
if (!motors->armed() || ap.land_complete) {
|
|
yaw_I_filt.reset(0.0f);
|
|
return;
|
|
}
|
|
|
|
// exit immediately if in standby
|
|
if (standby_active) {
|
|
yaw_I_filt.reset(0.0f);
|
|
return;
|
|
}
|
|
|
|
// magnitude of low pass filtered I term
|
|
const float I_term = attitude_control->get_rate_yaw_pid().get_pid_info().I;
|
|
const float I = fabsf(yaw_I_filt.apply(attitude_control->get_rate_yaw_pid().get_pid_info().I,G_Dt));
|
|
if (I > fabsf(I_term)) {
|
|
// never allow to be larger than I
|
|
yaw_I_filt.reset(I_term);
|
|
}
|
|
|
|
const float I_max = attitude_control->get_rate_yaw_pid().imax();
|
|
if ((is_positive(I_max) && ((I > YAW_IMBALANCE_IMAX_THRESHOLD * I_max) || (is_equal(I_term,I_max))))) {
|
|
// filtered using over percentage of I max or unfiltered = I max
|
|
// I makes up more than percentage of total available control power
|
|
const uint32_t now = millis();
|
|
if (now - last_yaw_warn_ms > YAW_IMBALANCE_WARN_MS) {
|
|
last_yaw_warn_ms = now;
|
|
gcs().send_text(MAV_SEVERITY_EMERGENCY, "Yaw Imbalance %0.0f%%", I *100);
|
|
}
|
|
}
|
|
}
|
|
|
|
#if PARACHUTE == ENABLED
|
|
|
|
// Code to detect a crash main ArduCopter code
|
|
#define PARACHUTE_CHECK_TRIGGER_SEC 1 // 1 second of loss of control triggers the parachute
|
|
#define PARACHUTE_CHECK_ANGLE_DEVIATION_DEG 30.0f // 30 degrees off from target indicates a loss of control
|
|
|
|
// parachute_check - disarms motors and triggers the parachute if serious loss of control has been detected
|
|
// vehicle is considered to have a "serious loss of control" by the vehicle being more than 30 degrees off from the target roll and pitch angles continuously for 1 second
|
|
// called at MAIN_LOOP_RATE
|
|
void Copter::parachute_check()
|
|
{
|
|
static uint16_t control_loss_count; // number of iterations we have been out of control
|
|
static int32_t baro_alt_start;
|
|
|
|
// exit immediately if parachute is not enabled
|
|
if (!parachute.enabled()) {
|
|
return;
|
|
}
|
|
|
|
// pass is_flying to parachute library
|
|
parachute.set_is_flying(!ap.land_complete);
|
|
|
|
// pass sink rate to parachute library
|
|
parachute.set_sink_rate(-inertial_nav.get_velocity_z_up_cms() * 0.01f);
|
|
|
|
// exit immediately if in standby
|
|
if (standby_active) {
|
|
return;
|
|
}
|
|
|
|
// call update to give parachute a chance to move servo or relay back to off position
|
|
parachute.update();
|
|
|
|
// return immediately if motors are not armed or pilot's throttle is above zero
|
|
if (!motors->armed()) {
|
|
control_loss_count = 0;
|
|
return;
|
|
}
|
|
|
|
if (parachute.release_initiated()) {
|
|
copter.arming.disarm(AP_Arming::Method::PARACHUTE_RELEASE);
|
|
return;
|
|
}
|
|
|
|
// return immediately if we are not in an angle stabilize flight mode or we are flipping
|
|
if (flightmode->mode_number() == Mode::Number::ACRO || flightmode->mode_number() == Mode::Number::FLIP) {
|
|
control_loss_count = 0;
|
|
return;
|
|
}
|
|
|
|
// ensure we are flying
|
|
if (ap.land_complete) {
|
|
control_loss_count = 0;
|
|
return;
|
|
}
|
|
|
|
// ensure the first control_loss event is from above the min altitude
|
|
if (control_loss_count == 0 && parachute.alt_min() != 0 && (current_loc.alt < (int32_t)parachute.alt_min() * 100)) {
|
|
return;
|
|
}
|
|
|
|
// trigger parachute release based on sink rate
|
|
parachute.check_sink_rate();
|
|
|
|
// check for angle error over 30 degrees
|
|
const float angle_error = attitude_control->get_att_error_angle_deg();
|
|
if (angle_error <= PARACHUTE_CHECK_ANGLE_DEVIATION_DEG) {
|
|
if (control_loss_count > 0) {
|
|
control_loss_count--;
|
|
}
|
|
return;
|
|
}
|
|
|
|
// increment counter
|
|
if (control_loss_count < (PARACHUTE_CHECK_TRIGGER_SEC*scheduler.get_loop_rate_hz())) {
|
|
control_loss_count++;
|
|
}
|
|
|
|
// record baro alt if we have just started losing control
|
|
if (control_loss_count == 1) {
|
|
baro_alt_start = baro_alt;
|
|
|
|
// exit if baro altitude change indicates we are not falling
|
|
} else if (baro_alt >= baro_alt_start) {
|
|
control_loss_count = 0;
|
|
return;
|
|
|
|
// To-Do: add check that the vehicle is actually falling
|
|
|
|
// check if loss of control for at least 1 second
|
|
} else if (control_loss_count >= (PARACHUTE_CHECK_TRIGGER_SEC*scheduler.get_loop_rate_hz())) {
|
|
// reset control loss counter
|
|
control_loss_count = 0;
|
|
AP::logger().Write_Error(LogErrorSubsystem::CRASH_CHECK, LogErrorCode::CRASH_CHECK_LOSS_OF_CONTROL);
|
|
// release parachute
|
|
parachute_release();
|
|
}
|
|
}
|
|
|
|
// parachute_release - trigger the release of the parachute, disarm the motors and notify the user
|
|
void Copter::parachute_release()
|
|
{
|
|
// disarm motors
|
|
arming.disarm(AP_Arming::Method::PARACHUTE_RELEASE);
|
|
|
|
// release parachute
|
|
parachute.release();
|
|
|
|
#if LANDING_GEAR_ENABLED == ENABLED
|
|
// deploy landing gear
|
|
landinggear.set_position(AP_LandingGear::LandingGear_Deploy);
|
|
#endif
|
|
}
|
|
|
|
// parachute_manual_release - trigger the release of the parachute, after performing some checks for pilot error
|
|
// checks if the vehicle is landed
|
|
void Copter::parachute_manual_release()
|
|
{
|
|
// exit immediately if parachute is not enabled
|
|
if (!parachute.enabled()) {
|
|
return;
|
|
}
|
|
|
|
// do not release if vehicle is landed
|
|
// do not release if we are landed or below the minimum altitude above home
|
|
if (ap.land_complete) {
|
|
// warn user of reason for failure
|
|
gcs().send_text(MAV_SEVERITY_INFO,"Parachute: Landed");
|
|
AP::logger().Write_Error(LogErrorSubsystem::PARACHUTES, LogErrorCode::PARACHUTE_LANDED);
|
|
return;
|
|
}
|
|
|
|
// do not release if we are landed or below the minimum altitude above home
|
|
if ((parachute.alt_min() != 0 && (current_loc.alt < (int32_t)parachute.alt_min() * 100))) {
|
|
// warn user of reason for failure
|
|
gcs().send_text(MAV_SEVERITY_ALERT,"Parachute: Too low");
|
|
AP::logger().Write_Error(LogErrorSubsystem::PARACHUTES, LogErrorCode::PARACHUTE_TOO_LOW);
|
|
return;
|
|
}
|
|
|
|
// if we get this far release parachute
|
|
parachute_release();
|
|
}
|
|
|
|
#endif // PARACHUTE == ENABLED
|