ardupilot/ArduCopter/compassmot.pde

249 lines
8.8 KiB
Plaintext

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
/*
compass/motor interference calibration
*/
// setup_compassmot - sets compass's motor interference parameters
static uint8_t mavlink_compassmot(mavlink_channel_t chan)
{
int8_t comp_type; // throttle or current based compensation
Vector3f compass_base; // compass vector when throttle is zero
Vector3f motor_impact; // impact of motors on compass vector
Vector3f motor_impact_scaled; // impact of motors on compass vector scaled with throttle
Vector3f motor_compensation; // final compensation to be stored to eeprom
float throttle_pct; // throttle as a percentage 0.0 ~ 1.0
float throttle_pct_max = 0.0f; // maximum throttle reached (as a percentage 0~1.0)
float current_amps_max = 0.0f; // maximum current reached
float interference_pct = 0.0f; // interference as a percentage of total mag field (for reporting purposes only)
uint32_t last_run_time;
uint32_t last_send_time;
bool updated = false; // have we updated the compensation vector at least once
uint8_t command_ack_start = command_ack_counter;
// exit immediately if we are already in compassmot
if (ap.compass_mot) {
// ignore restart messages
return 1;
}else{
ap.compass_mot = true;
}
// check compass is enabled
if (!g.compass_enabled) {
gcs[chan-MAVLINK_COMM_0].send_text_P(SEVERITY_HIGH, PSTR("compass disabled\n"));
ap.compass_mot = false;
return 1;
}
// check compass health
compass.read();
if (!compass.healthy(0)) {
gcs[chan-MAVLINK_COMM_0].send_text_P(SEVERITY_HIGH, PSTR("check compass"));
ap.compass_mot = false;
return 1;
}
// check if radio is calibrated
pre_arm_rc_checks();
if (!ap.pre_arm_rc_check) {
gcs[chan-MAVLINK_COMM_0].send_text_P(SEVERITY_HIGH, PSTR("RC not calibrated"));
ap.compass_mot = false;
return 1;
}
// check throttle is at zero
read_radio();
if (g.rc_3.control_in != 0) {
gcs[chan-MAVLINK_COMM_0].send_text_P(SEVERITY_HIGH, PSTR("thr not zero"));
ap.compass_mot = false;
return 1;
}
// check we are landed
if (!ap.land_complete) {
gcs[chan-MAVLINK_COMM_0].send_text_P(SEVERITY_HIGH, PSTR("Not landed"));
ap.compass_mot = false;
return 1;
}
// disable cpu failsafe
failsafe_disable();
// initialise compass
init_compass();
// default compensation type to use current if possible
if (battery.monitoring() == AP_BATT_MONITOR_VOLTAGE_AND_CURRENT) {
comp_type = AP_COMPASS_MOT_COMP_CURRENT;
}else{
comp_type = AP_COMPASS_MOT_COMP_THROTTLE;
}
// send back initial ACK
mavlink_msg_command_ack_send(chan, MAV_CMD_PREFLIGHT_CALIBRATION,0);
// flash leds
AP_Notify::flags.esc_calibration = true;
// warn user we are starting calibration
gcs[chan-MAVLINK_COMM_0].send_text_P(SEVERITY_HIGH, PSTR("STARTING CALIBRATION"));
// inform what type of compensation we are attempting
if (comp_type == AP_COMPASS_MOT_COMP_CURRENT) {
gcs[chan-MAVLINK_COMM_0].send_text_P(SEVERITY_HIGH, PSTR("CURRENT"));
} else{
gcs[chan-MAVLINK_COMM_0].send_text_P(SEVERITY_HIGH, PSTR("THROTTLE"));
}
// disable throttle and battery failsafe
g.failsafe_throttle = FS_THR_DISABLED;
g.failsafe_battery_enabled = FS_BATT_DISABLED;
g.failsafe_gps_enabled = FS_GPS_DISABLED;
// disable motor compensation
compass.motor_compensation_type(AP_COMPASS_MOT_COMP_DISABLED);
compass.set_motor_compensation(Vector3f(0,0,0));
// get initial compass readings
last_run_time = millis();
while ( millis() - last_run_time < 500 ) {
compass.accumulate();
}
compass.read();
// store initial x,y,z compass values
compass_base = compass.get_field();
// initialise motor compensation
motor_compensation = Vector3f(0,0,0);
// enable motors and pass through throttle
init_rc_out();
output_min();
motors.armed(true);
// initialise run time
last_run_time = millis();
last_send_time = millis();
// main run while there is no user input and the compass is healthy
while (command_ack_start == command_ack_counter && compass.healthy(0) && motors.armed()) {
// 50hz loop
if (millis() - last_run_time < 20) {
// grab some compass values
compass.accumulate();
hal.scheduler->delay(5);
continue;
}
last_run_time = millis();
// read radio input
read_radio();
// pass through throttle to motors
motors.throttle_pass_through();
// read some compass values
compass.read();
// read current
read_battery();
// calculate scaling for throttle
throttle_pct = (float)g.rc_3.control_in / 1000.0f;
throttle_pct = constrain_float(throttle_pct,0.0f,1.0f);
// if throttle is near zero, update base x,y,z values
if (throttle_pct <= 0.0f) {
compass_base = compass_base * 0.99f + compass.get_field() * 0.01f;
// causing printing to happen as soon as throttle is lifted
} else {
// calculate diff from compass base and scale with throttle
motor_impact = compass.get_field() - compass_base;
// throttle based compensation
if (comp_type == AP_COMPASS_MOT_COMP_THROTTLE) {
// scale by throttle
motor_impact_scaled = motor_impact / throttle_pct;
// adjust the motor compensation to negate the impact
motor_compensation = motor_compensation * 0.99f - motor_impact_scaled * 0.01f;
updated = true;
} else {
// current based compensation if more than 3amps being drawn
motor_impact_scaled = motor_impact / battery.current_amps();
// adjust the motor compensation to negate the impact if drawing over 3amps
if( battery.current_amps() >= 3.0f ) {
motor_compensation = motor_compensation * 0.99f - motor_impact_scaled * 0.01f;
updated = true;
}
}
// calculate interference percentage at full throttle as % of total mag field
if (comp_type == AP_COMPASS_MOT_COMP_THROTTLE) {
// interference is impact@fullthrottle / mag field * 100
interference_pct = motor_compensation.length() / (float)COMPASS_MAGFIELD_EXPECTED * 100.0f;
}else{
// interference is impact/amp * (max current seen / max throttle seen) / mag field * 100
interference_pct = motor_compensation.length() * (current_amps_max/throttle_pct_max) / (float)COMPASS_MAGFIELD_EXPECTED * 100.0f;
}
// record maximum throttle and current
throttle_pct_max = max(throttle_pct_max, throttle_pct);
current_amps_max = max(current_amps_max, battery.current_amps());
}
if (hal.scheduler->millis() - last_send_time > 500) {
last_send_time = hal.scheduler->millis();
mavlink_msg_compassmot_status_send(chan,
g.rc_3.control_in,
battery.current_amps(),
interference_pct,
motor_compensation.x,
motor_compensation.y,
motor_compensation.z);
}
}
// stop motors
motors.output_min();
motors.armed(false);
// set and save motor compensation
if (updated) {
compass.motor_compensation_type(comp_type);
compass.set_motor_compensation(motor_compensation);
compass.save_motor_compensation();
// display success message
gcs[chan-MAVLINK_COMM_0].send_text_P(SEVERITY_HIGH, PSTR("Calibration Successful!"));
} else {
// compensation vector never updated, report failure
gcs[chan-MAVLINK_COMM_0].send_text_P(SEVERITY_HIGH, PSTR("Failed!"));
compass.motor_compensation_type(AP_COMPASS_MOT_COMP_DISABLED);
}
// display new motor offsets and save
report_compass();
// turn off notify leds
AP_Notify::flags.esc_calibration = false;
// re-enable cpu failsafe
failsafe_enable();
// re-enable failsafes
g.failsafe_throttle.load();
g.failsafe_battery_enabled.load();
g.failsafe_gps_enabled.load();
// flag we have completed
ap.compass_mot = false;
return 0;
}