..
APM_Config.h
Plane: removed HIL_MODE_ATTITUDE
2013-04-12 17:44:40 +10:00
APM_Config.h.reference
Plane: cleanup HIL defines
2014-02-15 05:29:46 +11:00
ArduPlane.pde
Plane: added STAB_PITCH_DN_CD parameter
2014-08-03 17:17:20 +10:00
Attitude.pde
Plane: added STAB_PITCH_DN_CD parameter
2014-08-03 17:17:20 +10:00
GCS_Mavlink.pde
Plane: added STAB_PITCH_DN_CD parameter
2014-08-03 17:17:20 +10:00
Log.pde
Plane: fixed compass logging for COMPASS_PRIMARY != 0
2014-07-23 18:42:14 +10:00
Makefile
Plane: cleanup cruft in Makefile
2013-10-13 21:41:01 +11:00
Parameters.h
Plane: added STAB_PITCH_DN_CD parameter
2014-08-03 17:17:20 +10:00
Parameters.pde
Plane: added STAB_PITCH_DN_CD parameter
2014-08-03 17:17:20 +10:00
altitude.pde
Plane: fixed sense of altitude test for glide slope
2014-07-25 15:04:16 +10:00
climb_rate.pde
uncrustify ArduPlane/climb_rate.pde
2012-08-21 18:57:21 -07:00
command_description.txt
Cleanup: rename files with spaces in their names, replace with underscores
2012-02-28 16:14:31 -08:00
commands.pde
Plane: fixed guided alt without terrain bit
2014-07-25 10:31:45 +10:00
commands_logic.pde
Plane: added TERRAIN_FOLLOW parameter
2014-07-24 21:50:19 +10:00
commands_process.pde
Plane: RTL home when AUTO run with no mission
2014-03-19 12:12:31 +09:00
compat.h
Plane: fix for HAL_GPIO_*
2014-06-02 10:42:36 +10:00
compat.pde
Plane: removed some compat code
2013-09-30 21:06:43 +10:00
config.h
Rover: Add SERIAL2_PROTOCOL for GCS and FRSky telemtry
2014-07-29 17:08:20 -07:00
control_modes.pde
Plane: added MAV_CMD_DO_INVERTED_FLIGHT support
2014-06-05 16:12:10 +10:00
createTags
imported ArduPlane from ArduPilotMega svn
2011-09-09 11:29:39 +10:00
defines.h
Plane: rename enum for Telem2Protocol
2014-07-30 14:49:20 +10:00
events.pde
Plane: added AUTOTUNE flight mode
2014-04-12 14:12:14 +10:00
failsafe.pde
Plane: setup failsafe values for OBC in failsafe callback
2014-04-21 11:52:54 +10:00
geofence.pde
Plane: added TERRAIN_FOLLOW parameter
2014-07-24 21:50:19 +10:00
navigation.pde
Plane: split up altitude handling
2014-07-24 21:50:19 +10:00
nocore.inoflag
ArduPlane: Ported to AP_HAL
2012-12-20 14:51:36 +11:00
radio.pde
Plane: setup failsafe trim values for if FMU firmware dies
2014-04-21 08:37:56 +10:00
release-notes.txt
Plane: prepare for release of 3.0.3
2014-05-19 09:54:15 +10:00
sensors.pde
Plane: added TERRAIN_FOLLOW parameter
2014-07-24 21:50:19 +10:00
setup.pde
Plane: rename compass set_and_save_offsets
2014-07-10 20:25:21 +09:00
system.pde
Plane: added STAB_PITCH_DN_CD parameter
2014-08-03 17:17:20 +10:00
takeoff.pde
Plane: added TKOFF_THR_MAX parameter
2014-05-24 22:19:50 +10:00
test.pde
Plane: added VRBRAIN #defines and #includes
2014-04-08 16:19:20 +10:00