ardupilot/Tools/ArdupilotMegaPlanner/Properties/AssemblyInfo.cs

39 lines
1.5 KiB
C#

using System.Reflection;
using System.Runtime.CompilerServices;
using System.Runtime.InteropServices;
using System.Resources;
// General Information about an assembly is controlled through the following
// set of attributes. Change these attribute values to modify the information
// associated with an assembly.
[assembly: AssemblyTitle("Mission Planner")]
[assembly: AssemblyDescription("Mission Planner")]
[assembly: AssemblyConfiguration("")]
[assembly: AssemblyCompany("Michael Oborne")]
[assembly: AssemblyProduct("Mission Planner")]
[assembly: AssemblyCopyright("Copyright © Michael Oborne 2010-2012")]
[assembly: AssemblyTrademark("")]
[assembly: AssemblyCulture("")]
// Setting ComVisible to false makes the types in this assembly not visible
// to COM components. If you need to access a type in this assembly from
// COM, set the ComVisible attribute to true on that type.
[assembly: ComVisible(false)]
// The following GUID is for the ID of the typelib if this project is exposed to COM
[assembly: Guid("b563f1e1-7e93-486a-a0f8-62782bb17c0e")]
// Version information for an assembly consists of the following four values:
//
// Major Version
// Minor Version
// Build Number
// Revision
//
// You can specify all the values or you can default the Build and Revision Numbers
// by using the '*' as shown below:
// [assembly: AssemblyVersion("1.0.*")]
[assembly: AssemblyVersion("1.1.*")]
[assembly: AssemblyFileVersion("1.2.26")]
[assembly: NeutralResourcesLanguageAttribute("")]