ardupilot/libraries/AP_Mount/AP_Mount.h

235 lines
9.5 KiB
C++

/************************************************************
* AP_mount -- library to control a 2 or 3 axis mount. *
* *
* Author: Joe Holdsworth; *
* Ritchie Wilson; *
* Amilcar Lucas; *
* Gregory Fletcher; *
* heavily modified by Randy Mackay *
* *
* Purpose: Move a 2 or 3 axis mount attached to vehicle, *
* Used for mount to track targets or stabilise *
* camera plus other modes. *
* *
* Usage: Use in main code to control mounts attached to *
* vehicle. *
* *
* Comments: All angles in degrees, distances in meters *
* unless otherwise stated. *
************************************************************/
#pragma once
#include "AP_Mount_config.h"
#if HAL_MOUNT_ENABLED
#include <AP_Math/AP_Math.h>
#include <AP_Common/AP_Common.h>
#include <AP_Common/Location.h>
#include <GCS_MAVLink/GCS_MAVLink.h>
#include "AP_Mount_Params.h"
// maximum number of mounts
#define AP_MOUNT_MAX_INSTANCES 2
// declare backend classes
class AP_Mount_Backend;
class AP_Mount_Servo;
class AP_Mount_SoloGimbal;
class AP_Mount_Alexmos;
class AP_Mount_SToRM32;
class AP_Mount_SToRM32_serial;
class AP_Mount_Gremsy;
class AP_Mount_Siyi;
class AP_Mount_Scripting;
/*
This is a workaround to allow the MAVLink backend access to the
SmallEKF. It would be nice to find a neater solution to this
*/
class AP_Mount
{
// declare backends as friends
friend class AP_Mount_Backend;
friend class AP_Mount_Servo;
friend class AP_Mount_SoloGimbal;
friend class AP_Mount_Alexmos;
friend class AP_Mount_SToRM32;
friend class AP_Mount_SToRM32_serial;
friend class AP_Mount_Gremsy;
friend class AP_Mount_Siyi;
friend class AP_Mount_Scripting;
public:
AP_Mount();
/* Do not allow copies */
CLASS_NO_COPY(AP_Mount);
// get singleton instance
static AP_Mount *get_singleton() {
return _singleton;
}
// Enums
enum MountType {
Mount_Type_None = 0, /// no mount
Mount_Type_Servo = 1, /// servo controlled mount
Mount_Type_SoloGimbal = 2, /// Solo's gimbal
Mount_Type_Alexmos = 3, /// Alexmos mount
Mount_Type_SToRM32 = 4, /// SToRM32 mount using MAVLink protocol
Mount_Type_SToRM32_serial = 5, /// SToRM32 mount using custom serial protocol
Mount_Type_Gremsy = 6, /// Gremsy gimbal using MAVLink v2 Gimbal protocol
Mount_Type_BrushlessPWM = 7, /// Brushless (stabilized) gimbal using PWM protocol
Mount_Type_Siyi = 8, /// Siyi gimbal using custom serial protocol
Mount_Type_Scripting = 9, /// Scripting gimbal driver
};
// init - detect and initialise all mounts
void init();
// update - give mount opportunity to update servos. should be called at 10hz or higher
void update();
// used for gimbals that need to read INS data at full rate
void update_fast();
// return primary instance ID
uint8_t get_primary_instance() const { return _primary; }
// get_mount_type - returns the type of mount
AP_Mount::MountType get_mount_type() const { return get_mount_type(_primary); }
AP_Mount::MountType get_mount_type(uint8_t instance) const;
// has_pan_control - returns true if the mount has yaw control (required for copters)
bool has_pan_control() const { return has_pan_control(_primary); }
bool has_pan_control(uint8_t instance) const;
// get_mode - returns current mode of mount (i.e. Retracted, Neutral, RC_Targeting, GPS Point)
enum MAV_MOUNT_MODE get_mode() const { return get_mode(_primary); }
enum MAV_MOUNT_MODE get_mode(uint8_t instance) const;
// set_mode - sets mount's mode
// returns true if mode is successfully set
void set_mode(enum MAV_MOUNT_MODE mode) { return set_mode(_primary, mode); }
void set_mode(uint8_t instance, enum MAV_MOUNT_MODE mode);
// set_mode_to_default - restores the mode to it's default mode held in the MNTx_DEFLT_MODE parameter
// this operation requires 60us on a Pixhawk/PX4
void set_mode_to_default() { set_mode_to_default(_primary); }
void set_mode_to_default(uint8_t instance);
// set yaw_lock. If true, the gimbal's yaw target is maintained in earth-frame meaning it will lock onto an earth-frame heading (e.g. North)
// If false (aka "follow") the gimbal's yaw is maintained in body-frame meaning it will rotate with the vehicle
void set_yaw_lock(bool yaw_lock) { set_yaw_lock(_primary, yaw_lock); }
void set_yaw_lock(uint8_t instance, bool yaw_lock);
// set angle target in degrees
// yaw_is_earth_frame (aka yaw_lock) should be true if yaw angle is earth-frame, false if body-frame
void set_angle_target(float roll_deg, float pitch_deg, float yaw_deg, bool yaw_is_earth_frame) { set_angle_target(_primary, roll_deg, pitch_deg, yaw_deg, yaw_is_earth_frame); }
void set_angle_target(uint8_t instance, float roll_deg, float pitch_deg, float yaw_deg, bool yaw_is_earth_frame);
// sets rate target in deg/s
// yaw_lock should be true if the yaw rate is earth-frame, false if body-frame (e.g. rotates with body of vehicle)
void set_rate_target(float roll_degs, float pitch_degs, float yaw_degs, bool yaw_lock) { set_rate_target(_primary, roll_degs, pitch_degs, yaw_degs, yaw_lock); }
void set_rate_target(uint8_t instance, float roll_degs, float pitch_degs, float yaw_degs, bool yaw_lock);
// set_roi_target - sets target location that mount should attempt to point towards
void set_roi_target(const Location &target_loc) { set_roi_target(_primary,target_loc); }
void set_roi_target(uint8_t instance, const Location &target_loc);
// clear_roi_target - clears target location that mount should attempt to point towards
void clear_roi_target() { clear_roi_target(_primary); }
void clear_roi_target(uint8_t instance);
// point at system ID sysid
void set_target_sysid(uint8_t sysid) { set_target_sysid(_primary, sysid); }
void set_target_sysid(uint8_t instance, uint8_t sysid);
// mavlink message handling:
MAV_RESULT handle_command_long(const mavlink_command_long_t &packet);
void handle_param_value(const mavlink_message_t &msg);
void handle_message(mavlink_channel_t chan, const mavlink_message_t &msg);
// send a GIMBAL_DEVICE_ATTITUDE_STATUS message to GCS
void send_gimbal_device_attitude_status(mavlink_channel_t chan);
// get mount's current attitude in euler angles in degrees. yaw angle is in body-frame
// returns true on success
bool get_attitude_euler(uint8_t instance, float& roll_deg, float& pitch_deg, float& yaw_bf_deg);
// run pre-arm check. returns false on failure and fills in failure_msg
// any failure_msg returned will not include a prefix
bool pre_arm_checks(char *failure_msg, uint8_t failure_msg_len);
// accessors for scripting backends
bool get_rate_target(uint8_t instance, float& roll_degs, float& pitch_degs, float& yaw_degs, bool& yaw_is_earth_frame);
bool get_angle_target(uint8_t instance, float& roll_deg, float& pitch_deg, float& yaw_deg, bool& yaw_is_earth_frame);
bool get_location_target(uint8_t instance, Location& target_loc);
void set_attitude_euler(uint8_t instance, float roll_deg, float pitch_deg, float yaw_bf_deg);
//
// camera controls for gimbals that include a camera
//
// take a picture
bool take_picture(uint8_t instance);
// start or stop video recording
// set start_recording = true to start record, false to stop recording
bool record_video(uint8_t instance, bool start_recording);
// set camera zoom step
// zoom out = -1, hold = 0, zoom in = 1
bool set_zoom_step(uint8_t instance, int8_t zoom_step);
// set focus in, out or hold
// focus in = -1, focus hold = 0, focus out = 1
bool set_manual_focus_step(uint8_t instance, int8_t focus_step);
// auto focus
bool set_auto_focus(uint8_t instance);
// parameter var table
static const struct AP_Param::GroupInfo var_info[];
protected:
static AP_Mount *_singleton;
// parameters for backends
AP_Mount_Params _params[AP_MOUNT_MAX_INSTANCES];
// front end members
uint8_t _num_instances; // number of mounts instantiated
uint8_t _primary; // primary mount
AP_Mount_Backend *_backends[AP_MOUNT_MAX_INSTANCES]; // pointers to instantiated mounts
private:
// Check if instance backend is ok
AP_Mount_Backend *get_primary() const;
AP_Mount_Backend *get_instance(uint8_t instance) const;
void handle_gimbal_report(mavlink_channel_t chan, const mavlink_message_t &msg);
void handle_mount_configure(const mavlink_message_t &msg);
void handle_mount_control(const mavlink_message_t &msg);
MAV_RESULT handle_command_do_mount_configure(const mavlink_command_long_t &packet);
MAV_RESULT handle_command_do_mount_control(const mavlink_command_long_t &packet);
MAV_RESULT handle_command_do_gimbal_manager_pitchyaw(const mavlink_command_long_t &packet);
void handle_gimbal_manager_set_attitude(const mavlink_message_t &msg);
void handle_global_position_int(const mavlink_message_t &msg);
void handle_gimbal_device_information(const mavlink_message_t &msg);
void handle_gimbal_device_attitude_status(const mavlink_message_t &msg);
// perform any required parameter conversion
void convert_params();
};
namespace AP {
AP_Mount *mount();
};
#endif // HAL_MOUNT_ENABLED