Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
ardupilot/libraries/AP_HAL_ChibiOS/UARTDriver.h

298 lines
8.6 KiB
C++
Raw Blame History

/*
* This file is free software: you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This file is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Code by Andrew Tridgell and Siddharth Bharat Purohit
*/
#pragma once
#include <AP_HAL/utility/RingBuffer.h>
#include "AP_HAL_ChibiOS.h"
#include "shared_dma.h"
#include "Semaphores.h"
#define RX_BOUNCE_BUFSIZE 64U
#define TX_BOUNCE_BUFSIZE 64U
// enough for serial0 to serial9, plus IOMCU
#define UART_MAX_DRIVERS 11
class ChibiOS::UARTDriver : public AP_HAL::UARTDriver {
public:
UARTDriver(uint8_t serial_num);
/* Do not allow copies */
CLASS_NO_COPY(UARTDriver);
bool is_initialized() override;
bool tx_pending() override;
uint32_t get_usb_baud() const override;
uint8_t get_usb_parity() const override;
// disable TX/RX pins for unusued uart
void disable_rxtx(void) const override;
uint32_t txspace() override;
void _rx_timer_tick(void);
void _tx_timer_tick(void);
#if HAL_FORWARD_OTG2_SERIAL
void fwd_otg2_serial(void);
#endif
// control optional features
bool set_options(uint16_t options) override;
uint16_t get_options(void) const override;
struct SerialDef {
BaseSequentialStream* serial;
uint8_t instance;
bool is_usb;
#ifndef HAL_UART_NODMA
bool dma_rx;
uint8_t dma_rx_stream_id;
uint32_t dma_rx_channel_id;
bool dma_tx;
uint8_t dma_tx_stream_id;
uint32_t dma_tx_channel_id;
#endif
ioline_t tx_line;
ioline_t rx_line;
ioline_t rts_line;
ioline_t cts_line;
int8_t rxinv_gpio;
uint8_t rxinv_polarity;
int8_t txinv_gpio;
uint8_t txinv_polarity;
uint8_t endpoint_id;
uint8_t rts_alternative_function;
uint8_t get_index(void) const {
return uint8_t(this - &_serial_tab[0]);
}
bool low_noise_line;
};
bool wait_timeout(uint16_t n, uint32_t timeout_ms) override;
void set_flow_control(enum flow_control flow_control) override;
enum flow_control get_flow_control(void) override { return _flow_control; }
// allow for low latency writes
bool set_unbuffered_writes(bool on) override;
void configure_parity(uint8_t v) override;
void set_stop_bits(int n) override;
/*
software control of the CTS/RTS pins if available. Return false if
not available
*/
bool set_RTS_pin(bool high) override;
bool set_CTS_pin(bool high) override;
/*
return timestamp estimate in microseconds for when the start of
a nbytes packet arrived on the uart. This should be treated as a
time constraint, not an exact time. It is guaranteed that the
packet did not start being received after this time, but it
could have been in a system buffer before the returned time.
This takes account of the baudrate of the link. For transports
that have no baudrate (such as USB) the time estimate may be
less accurate.
A return value of zero means the HAL does not support this API
*/
uint64_t receive_time_constraint_us(uint16_t nbytes) override;
uint32_t bw_in_bytes_per_second() const override {
if (sdef.is_usb) {
return 200*1024;
}
return _baudrate/10;
}
uint32_t get_baud_rate() const override { return _baudrate; }
#if HAL_UART_STATS_ENABLED
// request information on uart I/O for one uart
void uart_info(ExpandingString &str, StatsTracker &stats, const uint32_t dt_ms) override;
#endif
/*
return true if this UART has DMA enabled on both RX and TX
*/
bool is_dma_enabled() const override { return rx_dma_enabled && tx_dma_enabled; }
private:
const SerialDef &sdef;
bool rx_dma_enabled;
bool tx_dma_enabled;
/*
copy of rx_line, tx_line, rts_line and cts_line with alternative configs resolved
*/
ioline_t atx_line;
ioline_t arx_line;
ioline_t arts_line;
ioline_t acts_line;
// thread used for all UARTs
static thread_t* volatile uart_rx_thread_ctx;
// table to find UARTDrivers from serial number, used for event handling
static UARTDriver *serial_drivers[UART_MAX_DRIVERS];
// thread used for writing and reading
thread_t* volatile uart_thread_ctx;
char uart_thread_name[6];
// index into serial_drivers table
uint8_t serial_num;
uint32_t _baudrate;
#if HAL_USE_SERIAL == TRUE
SerialConfig sercfg;
#endif
const thread_t* _uart_owner_thd;
struct {
// thread waiting for data
thread_t *thread_ctx;
// number of bytes needed
uint16_t n;
} _wait;
// we use in-task ring buffers to reduce the system call cost
// of ::read() and ::write() in the main loop
#ifndef HAL_UART_NODMA
volatile uint8_t rx_bounce_idx;
uint8_t *rx_bounce_buf[2];
uint8_t *tx_bounce_buf;
uint16_t contention_counter;
#endif
ByteBuffer _readbuf{0};
ByteBuffer _writebuf{0};
uint32_t _rts_threshold;
HAL_Semaphore _write_mutex;
#ifndef HAL_UART_NODMA
const stm32_dma_stream_t* rxdma;
const stm32_dma_stream_t* txdma;
#endif
volatile bool _in_rx_timer;
volatile bool _in_tx_timer;
volatile bool _rx_initialised;
volatile bool _tx_initialised;
volatile bool _device_initialised;
#ifndef HAL_UART_NODMA
Shared_DMA *dma_handle;
#endif
static const SerialDef _serial_tab[];
// timestamp for receiving data on the UART, avoiding a lock
uint64_t _receive_timestamp[2];
uint8_t _receive_timestamp_idx;
// handling of flow control
enum flow_control _flow_control = FLOW_CONTROL_DISABLE;
bool _rts_is_active;
uint32_t _last_write_completed_us;
uint32_t _first_write_started_us;
uint32_t _total_written;
// statistics
uint32_t _tx_stats_bytes;
uint32_t _rx_stats_bytes;
// we remember config options from set_options to apply on sdStart()
uint32_t _cr1_options;
uint32_t _cr2_options;
uint32_t _cr3_options;
uint16_t _last_options;
// half duplex control. After writing we throw away bytes for 4 byte widths to
// prevent reading our own bytes back
#if CH_CFG_USE_EVENTS == TRUE
bool half_duplex;
event_listener_t hd_listener;
eventflags_t hd_tx_active;
void half_duplex_setup_tx(void);
#endif
// set to true for unbuffered writes (low latency writes)
bool unbuffered_writes;
#if CH_CFG_USE_EVENTS == TRUE
// listener for parity error events
event_listener_t ev_listener;
bool parity_enabled;
#endif
#ifndef HAL_UART_NODMA
static void rx_irq_cb(void* sd);
#endif
static void rxbuff_full_irq(void* self, uint32_t flags);
static void tx_complete(void* self, uint32_t flags);
#ifndef HAL_UART_NODMA
void dma_tx_allocate(Shared_DMA *ctx);
void dma_tx_deallocate(Shared_DMA *ctx);
void dma_rx_enable(void);
#endif
void update_rts_line(void);
void check_dma_tx_completion(void);
#ifndef HAL_UART_NODMA
void write_pending_bytes_DMA(uint32_t n);
#endif
void write_pending_bytes_NODMA(uint32_t n);
void write_pending_bytes(void);
void read_bytes_NODMA();
void receive_timestamp_update(void);
// set SERIALn_OPTIONS for pullup/pulldown
void set_pushpull(uint16_t options);
static void thread_rx_init();
void thread_init();
void uart_thread();
static void uart_rx_thread(void* arg);
static void uart_thread_trampoline(void* p);
protected:
void _begin(uint32_t b, uint16_t rxS, uint16_t txS) override;
void _end() override;
void _flush() override;
size_t _write(const uint8_t *buffer, size_t size) override;
ssize_t _read(uint8_t *buffer, uint16_t count) override;
uint32_t _available() override;
bool _discard_input() override;
#if HAL_UART_STATS_ENABLED
// Getters for cumulative tx and rx counts
uint32_t get_total_tx_bytes() const override { return _tx_stats_bytes; }
uint32_t get_total_rx_bytes() const override { return _rx_stats_bytes; }
#if CH_CFG_USE_EVENTS == TRUE
uint32_t _rx_stats_framing_errors;
uint32_t _rx_stats_overrun_errors;
uint32_t _rx_stats_noise_errors;
event_listener_t err_listener;
bool err_listener_initialised;
#endif
#endif
};
// access to usb init for stdio.cpp
void usb_initialise(void);
Reference in New Issue View Git Blame Copy Permalink