mirror of https://github.com/ArduPilot/ardupilot
345 lines
9.9 KiB
C++
345 lines
9.9 KiB
C++
/*
|
|
st24 decoder, based on PX4Firmware/src/rc/lib/rc/st24.c from PX4Firmware
|
|
modified for use in AP_HAL_* by Andrew Tridgell
|
|
*/
|
|
/****************************************************************************
|
|
*
|
|
* Copyright (c) 2014 PX4 Development Team. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name PX4 nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/*
|
|
* @file st24.cpp
|
|
*
|
|
* RC protocol implementation for Yuneec ST24 transmitter.
|
|
*
|
|
* @author Lorenz Meier <lm@inf.ethz.ch>
|
|
*/
|
|
|
|
#include <stdbool.h>
|
|
#include <stdio.h>
|
|
#include <stdint.h>
|
|
#include "st24.h"
|
|
|
|
#define ST24_DATA_LEN_MAX 64
|
|
#define ST24_STX1 0x55
|
|
#define ST24_STX2 0x55
|
|
|
|
enum ST24_PACKET_TYPE {
|
|
ST24_PACKET_TYPE_CHANNELDATA12 = 0,
|
|
ST24_PACKET_TYPE_CHANNELDATA24,
|
|
ST24_PACKET_TYPE_TRANSMITTERGPSDATA
|
|
};
|
|
|
|
#pragma pack(push, 1)
|
|
typedef struct {
|
|
uint8_t header1; ///< 0x55 for a valid packet
|
|
uint8_t header2; ///< 0x55 for a valid packet
|
|
uint8_t length; ///< length includes type, data, and crc = sizeof(type)+sizeof(data[payload_len])+sizeof(crc8)
|
|
uint8_t type; ///< from enum ST24_PACKET_TYPE
|
|
uint8_t st24_data[ST24_DATA_LEN_MAX];
|
|
uint8_t crc8; ///< crc8 checksum, calculated by st24_common_crc8 and including fields length, type and st24_data
|
|
} ReceiverFcPacket;
|
|
|
|
/**
|
|
* RC Channel data (12 channels).
|
|
*
|
|
* This is incoming from the ST24
|
|
*/
|
|
typedef struct {
|
|
uint16_t t; ///< packet counter or clock
|
|
uint8_t rssi; ///< signal strength
|
|
uint8_t packet_count; ///< Number of UART packets sent since reception of last RF frame (this tells something about age / rate)
|
|
uint8_t channel[18]; ///< channel data, 12 channels (12 bit numbers)
|
|
} ChannelData12;
|
|
|
|
/**
|
|
* RC Channel data (12 channels).
|
|
*
|
|
*/
|
|
typedef struct {
|
|
uint16_t t; ///< packet counter or clock
|
|
uint8_t rssi; ///< signal strength
|
|
uint8_t packet_count; ///< Number of UART packets sent since reception of last RF frame (this tells something about age / rate)
|
|
uint8_t channel[36]; ///< channel data, 24 channels (12 bit numbers)
|
|
} ChannelData24;
|
|
|
|
/**
|
|
* Telemetry packet
|
|
*
|
|
* This is outgoing to the ST24
|
|
*
|
|
* imuStatus:
|
|
* 8 bit total
|
|
* bits 0-2 for status
|
|
* - value 0 is FAILED
|
|
* - value 1 is INITIALIZING
|
|
* - value 2 is RUNNING
|
|
* - values 3 through 7 are reserved
|
|
* bits 3-7 are status for sensors (0 or 1)
|
|
* - mpu6050
|
|
* - accelerometer
|
|
* - primary gyro x
|
|
* - primary gyro y
|
|
* - primary gyro z
|
|
*
|
|
* pressCompassStatus
|
|
* 8 bit total
|
|
* bits 0-3 for compass status
|
|
* - value 0 is FAILED
|
|
* - value 1 is INITIALIZING
|
|
* - value 2 is RUNNING
|
|
* - value 3 - 15 are reserved
|
|
* bits 4-7 for pressure status
|
|
* - value 0 is FAILED
|
|
* - value 1 is INITIALIZING
|
|
* - value 2 is RUNNING
|
|
* - value 3 - 15 are reserved
|
|
*
|
|
*/
|
|
typedef struct {
|
|
uint16_t t; ///< packet counter or clock
|
|
int32_t lat; ///< lattitude (degrees) +/- 90 deg
|
|
int32_t lon; ///< longitude (degrees) +/- 180 deg
|
|
int32_t alt; ///< 0.01m resolution, altitude (meters)
|
|
int16_t vx, vy, vz; ///< velocity 0.01m res, +/-320.00 North-East- Down
|
|
uint8_t nsat; ///<number of satellites
|
|
uint8_t voltage; ///< 25.4V voltage = 5 + 255*0.1 = 30.5V, min=5V
|
|
uint8_t current; ///< 0.5A resolution
|
|
int16_t roll, pitch, yaw; ///< 0.01 degree resolution
|
|
uint8_t motorStatus; ///< 1 bit per motor for status 1=good, 0= fail
|
|
uint8_t imuStatus; ///< inertial measurement unit status
|
|
uint8_t pressCompassStatus; ///< baro / compass status
|
|
} TelemetryData;
|
|
|
|
#pragma pack(pop)
|
|
|
|
enum ST24_DECODE_STATE {
|
|
ST24_DECODE_STATE_UNSYNCED = 0,
|
|
ST24_DECODE_STATE_GOT_STX1,
|
|
ST24_DECODE_STATE_GOT_STX2,
|
|
ST24_DECODE_STATE_GOT_LEN,
|
|
ST24_DECODE_STATE_GOT_TYPE,
|
|
ST24_DECODE_STATE_GOT_DATA
|
|
};
|
|
|
|
/* define range mapping here, -+100% -> 1000..2000 */
|
|
#define ST24_RANGE_MIN 0.0f
|
|
#define ST24_RANGE_MAX 4096.0f
|
|
|
|
#define ST24_TARGET_MIN 1000.0f
|
|
#define ST24_TARGET_MAX 2000.0f
|
|
|
|
/* pre-calculate the floating point stuff as far as possible at compile time */
|
|
#define ST24_SCALE_FACTOR ((ST24_TARGET_MAX - ST24_TARGET_MIN) / (ST24_RANGE_MAX - ST24_RANGE_MIN))
|
|
#define ST24_SCALE_OFFSET (int)(ST24_TARGET_MIN - (ST24_SCALE_FACTOR * ST24_RANGE_MIN + 0.5f))
|
|
|
|
static enum ST24_DECODE_STATE _decode_state = ST24_DECODE_STATE_UNSYNCED;
|
|
static uint8_t _rxlen;
|
|
|
|
static ReceiverFcPacket _rxpacket;
|
|
|
|
static uint8_t st24_common_crc8(uint8_t *ptr, uint8_t len)
|
|
{
|
|
uint8_t i, crc ;
|
|
crc = 0;
|
|
|
|
while (len--) {
|
|
for (i = 0x80; i != 0; i >>= 1) {
|
|
if ((crc & 0x80) != 0) {
|
|
crc <<= 1;
|
|
crc ^= 0x07;
|
|
|
|
} else {
|
|
crc <<= 1;
|
|
}
|
|
|
|
if ((*ptr & i) != 0) {
|
|
crc ^= 0x07;
|
|
}
|
|
}
|
|
|
|
ptr++;
|
|
}
|
|
|
|
return (crc);
|
|
}
|
|
|
|
|
|
int st24_decode(uint8_t byte, uint8_t *rssi, uint8_t *rx_count, uint16_t *channel_count, uint16_t *channels,
|
|
uint16_t max_chan_count)
|
|
{
|
|
|
|
int ret = 1;
|
|
|
|
switch (_decode_state) {
|
|
case ST24_DECODE_STATE_UNSYNCED:
|
|
if (byte == ST24_STX1) {
|
|
_decode_state = ST24_DECODE_STATE_GOT_STX1;
|
|
|
|
} else {
|
|
ret = 3;
|
|
}
|
|
|
|
break;
|
|
|
|
case ST24_DECODE_STATE_GOT_STX1:
|
|
if (byte == ST24_STX2) {
|
|
_decode_state = ST24_DECODE_STATE_GOT_STX2;
|
|
|
|
} else {
|
|
_decode_state = ST24_DECODE_STATE_UNSYNCED;
|
|
}
|
|
|
|
break;
|
|
|
|
case ST24_DECODE_STATE_GOT_STX2:
|
|
|
|
/* ensure no data overflow failure or hack is possible */
|
|
if ((unsigned)byte <= sizeof(_rxpacket.length) + sizeof(_rxpacket.type) + sizeof(_rxpacket.st24_data)) {
|
|
_rxpacket.length = byte;
|
|
_rxlen = 0;
|
|
_decode_state = ST24_DECODE_STATE_GOT_LEN;
|
|
|
|
} else {
|
|
_decode_state = ST24_DECODE_STATE_UNSYNCED;
|
|
}
|
|
|
|
break;
|
|
|
|
case ST24_DECODE_STATE_GOT_LEN:
|
|
_rxpacket.type = byte;
|
|
_rxlen++;
|
|
_decode_state = ST24_DECODE_STATE_GOT_TYPE;
|
|
break;
|
|
|
|
case ST24_DECODE_STATE_GOT_TYPE:
|
|
_rxpacket.st24_data[_rxlen - 1] = byte;
|
|
_rxlen++;
|
|
|
|
if (_rxlen == (_rxpacket.length - 1)) {
|
|
_decode_state = ST24_DECODE_STATE_GOT_DATA;
|
|
}
|
|
|
|
break;
|
|
|
|
case ST24_DECODE_STATE_GOT_DATA:
|
|
_rxpacket.crc8 = byte;
|
|
_rxlen++;
|
|
|
|
if (st24_common_crc8((uint8_t *) & (_rxpacket.length), _rxlen) == _rxpacket.crc8) {
|
|
|
|
ret = 0;
|
|
|
|
/* decode the actual packet */
|
|
|
|
switch (_rxpacket.type) {
|
|
|
|
case ST24_PACKET_TYPE_CHANNELDATA12: {
|
|
ChannelData12 *d = (ChannelData12 *)_rxpacket.st24_data;
|
|
|
|
*rssi = d->rssi;
|
|
*rx_count = d->packet_count;
|
|
|
|
/* this can lead to rounding of the strides */
|
|
*channel_count = (max_chan_count < 12) ? max_chan_count : 12;
|
|
|
|
unsigned stride_count = (*channel_count * 3) / 2;
|
|
unsigned chan_index = 0;
|
|
|
|
for (unsigned i = 0; i < stride_count; i += 3) {
|
|
channels[chan_index] = ((uint16_t)d->channel[i] << 4);
|
|
channels[chan_index] |= ((uint16_t)(0xF0 & d->channel[i + 1]) >> 4);
|
|
/* convert values to 1000-2000 ppm encoding in a not too sloppy fashion */
|
|
channels[chan_index] = (uint16_t)(channels[chan_index] * ST24_SCALE_FACTOR + .5f) + ST24_SCALE_OFFSET;
|
|
chan_index++;
|
|
|
|
channels[chan_index] = ((uint16_t)d->channel[i + 2]);
|
|
channels[chan_index] |= (((uint16_t)(0x0F & d->channel[i + 1])) << 8);
|
|
/* convert values to 1000-2000 ppm encoding in a not too sloppy fashion */
|
|
channels[chan_index] = (uint16_t)(channels[chan_index] * ST24_SCALE_FACTOR + .5f) + ST24_SCALE_OFFSET;
|
|
chan_index++;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case ST24_PACKET_TYPE_CHANNELDATA24: {
|
|
ChannelData24 *d = (ChannelData24 *)&_rxpacket.st24_data;
|
|
|
|
*rssi = d->rssi;
|
|
*rx_count = d->packet_count;
|
|
|
|
/* this can lead to rounding of the strides */
|
|
*channel_count = (max_chan_count < 24) ? max_chan_count : 24;
|
|
|
|
unsigned stride_count = (*channel_count * 3) / 2;
|
|
unsigned chan_index = 0;
|
|
|
|
for (unsigned i = 0; i < stride_count; i += 3) {
|
|
channels[chan_index] = ((uint16_t)d->channel[i] << 4);
|
|
channels[chan_index] |= ((uint16_t)(0xF0 & d->channel[i + 1]) >> 4);
|
|
/* convert values to 1000-2000 ppm encoding in a not too sloppy fashion */
|
|
channels[chan_index] = (uint16_t)(channels[chan_index] * ST24_SCALE_FACTOR + .5f) + ST24_SCALE_OFFSET;
|
|
chan_index++;
|
|
|
|
channels[chan_index] = ((uint16_t)d->channel[i + 2]);
|
|
channels[chan_index] |= (((uint16_t)(0x0F & d->channel[i + 1])) << 8);
|
|
/* convert values to 1000-2000 ppm encoding in a not too sloppy fashion */
|
|
channels[chan_index] = (uint16_t)(channels[chan_index] * ST24_SCALE_FACTOR + .5f) + ST24_SCALE_OFFSET;
|
|
chan_index++;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case ST24_PACKET_TYPE_TRANSMITTERGPSDATA: {
|
|
|
|
// ReceiverFcPacket* d = (ReceiverFcPacket*)&_rxpacket.st24_data;
|
|
/* we silently ignore this data for now, as it is unused */
|
|
ret = 2;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
ret = 2;
|
|
break;
|
|
}
|
|
|
|
} else {
|
|
/* decoding failed */
|
|
ret = 4;
|
|
}
|
|
|
|
_decode_state = ST24_DECODE_STATE_UNSYNCED;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|