mirror of https://github.com/ArduPilot/ardupilot
145 lines
7.5 KiB
XML
145 lines
7.5 KiB
XML
<?xml version="1.0"?>
|
|
<mavlink>
|
|
<include>common.xml</include>
|
|
|
|
<!-- <enums>
|
|
<enum name="SLUGS_ACTION" >
|
|
<description> Slugs Actions </description>
|
|
<entry name = "SLUGS_ACTION_NONE">
|
|
<entry name = "SLUGS_ACTION_SUCCESS">
|
|
<entry name = "SLUGS_ACTION_FAIL">
|
|
<entry name = "SLUGS_ACTION_EEPROM">
|
|
<entry name = "SLUGS_ACTION_MODE_CHANGE">
|
|
<entry name = "SLUGS_ACTION_MODE_REPORT">
|
|
<entry name = "SLUGS_ACTION_PT_CHANGE">
|
|
<entry name = "SLUGS_ACTION_PT_REPORT">
|
|
<entry name = "SLUGS_ACTION_PID_CHANGE">
|
|
<entry name = "SLUGS_ACTION_PID_REPORT">
|
|
<entry name = "SLUGS_ACTION_WP_CHANGE">
|
|
<entry name = "SLUGS_ACTION_WP_REPORT">
|
|
<entry name = "SLUGS_ACTION_MLC_CHANGE">
|
|
<entry name = "SLUGS_ACTION_MLC_REPORT">
|
|
</enum>
|
|
|
|
<enum name="WP_PROTOCOL_STATE" >
|
|
<description> Waypoint Protocol States </description>
|
|
<entry name = "WP_PROT_IDLE">
|
|
<entry name = "WP_PROT_LIST_REQUESTED">
|
|
<entry name = "WP_PROT_NUM_SENT">
|
|
<entry name = "WP_PROT_TX_WP">
|
|
<entry name = "WP_PROT_RX_WP">
|
|
<entry name = "WP_PROT_SENDING_WP_IDLE">
|
|
<entry name = "WP_PROT_GETTING_WP_IDLE">
|
|
</enum>
|
|
|
|
</enums> -->
|
|
|
|
<messages>
|
|
|
|
<message name="CPU_LOAD" id="170">
|
|
<description>Sensor and DSC control loads.</description>
|
|
<field name="sensLoad" type="uint8_t">Sensor DSC Load</field>
|
|
<field name="ctrlLoad" type="uint8_t">Control DSC Load</field>
|
|
<field name="batVolt" type="uint16_t">Battery Voltage in millivolts</field>
|
|
</message>
|
|
|
|
<message name="AIR_DATA" id="171">
|
|
<description>Air data for altitude and airspeed computation.</description>
|
|
<field name="dynamicPressure" type="float">Dynamic pressure (Pa)</field>
|
|
<field name="staticPressure" type="float">Static pressure (Pa)</field>
|
|
<field name="temperature" type="uint16_t">Board temperature</field>
|
|
</message>
|
|
|
|
<message name="SENSOR_BIAS" id="172">
|
|
<description>Accelerometer and gyro biases.</description>
|
|
<field name="axBias" type="float">Accelerometer X bias (m/s)</field>
|
|
<field name="ayBias" type="float">Accelerometer Y bias (m/s)</field>
|
|
<field name="azBias" type="float">Accelerometer Z bias (m/s)</field>
|
|
<field name="gxBias" type="float">Gyro X bias (rad/s)</field>
|
|
<field name="gyBias" type="float">Gyro Y bias (rad/s)</field>
|
|
<field name="gzBias" type="float">Gyro Z bias (rad/s)</field>
|
|
</message>
|
|
|
|
<message name="DIAGNOSTIC" id="173">
|
|
<description>Configurable diagnostic messages.</description>
|
|
<field name="diagFl1" type="float">Diagnostic float 1</field>
|
|
<field name="diagFl2" type="float">Diagnostic float 2</field>
|
|
<field name="diagFl3" type="float">Diagnostic float 3</field>
|
|
<field name="diagSh1" type="int16_t">Diagnostic short 1</field>
|
|
<field name="diagSh2" type="int16_t">Diagnostic short 2</field>
|
|
<field name="diagSh3" type="int16_t">Diagnostic short 3</field>
|
|
</message>
|
|
|
|
<message name="SLUGS_NAVIGATION" id="176">
|
|
<description>Data used in the navigation algorithm.</description>
|
|
<field name="u_m" type="float">Measured Airspeed prior to the Nav Filter</field>
|
|
<field name="phi_c" type="float">Commanded Roll</field>
|
|
<field name="theta_c" type="float">Commanded Pitch</field>
|
|
<field name="psiDot_c" type="float">Commanded Turn rate</field>
|
|
<field name="ay_body" type="float">Y component of the body acceleration</field>
|
|
<field name="totalDist" type="float">Total Distance to Run on this leg of Navigation</field>
|
|
<field name="dist2Go" type="float">Remaining distance to Run on this leg of Navigation</field>
|
|
<field name="fromWP" type="uint8_t">Origin WP</field>
|
|
<field name="toWP" type="uint8_t">Destination WP</field>
|
|
</message>
|
|
|
|
<message name="DATA_LOG" id="177">
|
|
<description>Configurable data log probes to be used inside Simulink.</description>
|
|
<field name="fl_1" type="float">Log value 1 </field>
|
|
<field name="fl_2" type="float">Log value 2 </field>
|
|
<field name="fl_3" type="float">Log value 3 </field>
|
|
<field name="fl_4" type="float">Log value 4 </field>
|
|
<field name="fl_5" type="float">Log value 5 </field>
|
|
<field name="fl_6" type="float">Log value 6 </field>
|
|
</message>
|
|
|
|
<message name="GPS_DATE_TIME" id="179">
|
|
<description>Pilot console PWM messges.</description>
|
|
<field name="year" type="uint8_t">Year reported by Gps </field>
|
|
<field name="month" type="uint8_t">Month reported by Gps </field>
|
|
<field name="day" type="uint8_t">Day reported by Gps </field>
|
|
<field name="hour" type="uint8_t">Hour reported by Gps </field>
|
|
<field name="min" type="uint8_t">Min reported by Gps </field>
|
|
<field name="sec" type="uint8_t">Sec reported by Gps </field>
|
|
<field name="visSat" type="uint8_t">Visible sattelites reported by Gps </field>
|
|
</message>
|
|
|
|
<message name="MID_LVL_CMDS" id="180">
|
|
<description>Mid Level commands sent from the GS to the autopilot. These are only sent when being opperated in mid-level commands mode from the ground; for periodic report of these commands generated from the autopilot see message XXXX.</description>
|
|
<field name="target" type="uint8_t">The system setting the commands</field>
|
|
<field name="hCommand" type="float">Commanded Airspeed</field>
|
|
<field name="uCommand" type="float">Log value 2 </field>
|
|
<field name="rCommand" type="float">Log value 3 </field>
|
|
</message>
|
|
|
|
|
|
<message name="CTRL_SRFC_PT" id="181">
|
|
<description>This message configures the Selective Passthrough mode. it allows to select which control surfaces the Pilot can control from his console. It is implemented as a bitfield as follows:
|
|
Position Bit Code
|
|
=================================
|
|
15-8 Reserved
|
|
7 dt_pass 128
|
|
6 dla_pass 64
|
|
5 dra_pass 32
|
|
4 dr_pass 16
|
|
3 dle_pass 8
|
|
2 dre_pass 4
|
|
1 dlf_pass 2
|
|
0 drf_pass 1
|
|
Where Bit 15 is the MSb. 0 = AP has control of the surface; 1 = Pilot Console has control of the surface.</description>
|
|
<field name="target" type="uint8_t">The system setting the commands</field>
|
|
<field name="bitfieldPt" type="uint16_t">Bitfield containing the PT configuration</field>
|
|
</message>
|
|
|
|
|
|
|
|
<message name="SLUGS_ACTION" id="183">
|
|
<description>Action messages focused on the SLUGS AP. </description>
|
|
<field name="target" type="uint8_t">The system reporting the action</field>
|
|
<field name="actionId" type="uint8_t">Action ID. See apDefinitions.h in the SLUGS /clib directory for the ID names</field>
|
|
<field name="actionVal" type="uint16_t">Value associated with the action</field>
|
|
</message>
|
|
|
|
</messages>
|
|
</mavlink>
|