mirror of https://github.com/ArduPilot/ardupilot
116 lines
3.4 KiB
C++
116 lines
3.4 KiB
C++
// Jacob Walser: jacob@bluerobotics.com
|
|
|
|
#include "Sub.h"
|
|
|
|
// counter to verify contact with bottom
|
|
static uint32_t bottom_detector_count = 0;
|
|
static uint32_t surface_detector_count = 0;
|
|
static float current_depth = 0;
|
|
|
|
// checks if we have have hit bottom or surface and updates the ap.at_bottom and ap.at_surface flags
|
|
// called at MAIN_LOOP_RATE
|
|
// ToDo: doesn't need to be called this fast
|
|
void Sub::update_surface_and_bottom_detector()
|
|
{
|
|
if (!motors.armed()) { // only update when armed
|
|
set_surfaced(false);
|
|
set_bottomed(false);
|
|
return;
|
|
}
|
|
|
|
Vector3f velocity;
|
|
ahrs.get_velocity_NED(velocity);
|
|
|
|
// check that we are not moving up or down
|
|
bool vel_stationary = velocity.z > -0.05 && velocity.z < 0.05;
|
|
|
|
if (ap.depth_sensor_present && sensor_health.depth) { // we can use the external pressure sensor for a very accurate and current measure of our z axis position
|
|
current_depth = barometer.get_altitude(); // cm
|
|
|
|
|
|
if (ap.at_surface) {
|
|
set_surfaced(current_depth > g.surface_depth/100.0 - 0.05); // add a 5cm buffer so it doesn't trigger too often
|
|
} else {
|
|
set_surfaced(current_depth > g.surface_depth/100.0); // If we are above surface depth, we are surfaced
|
|
}
|
|
|
|
|
|
if (motors.limit.throttle_lower && vel_stationary) {
|
|
// bottom criteria met - increment the counter and check if we've triggered
|
|
if (bottom_detector_count < ((float)BOTTOM_DETECTOR_TRIGGER_SEC)*MAIN_LOOP_RATE) {
|
|
bottom_detector_count++;
|
|
} else {
|
|
set_bottomed(true);
|
|
}
|
|
|
|
} else {
|
|
set_bottomed(false);
|
|
}
|
|
|
|
// with no external baro, the only thing we have to go by is a vertical velocity estimate
|
|
} else if (vel_stationary) {
|
|
if (motors.limit.throttle_upper) {
|
|
|
|
// surface criteria met, increment counter and see if we've triggered
|
|
if (surface_detector_count < ((float)SURFACE_DETECTOR_TRIGGER_SEC)*MAIN_LOOP_RATE) {
|
|
surface_detector_count++;
|
|
} else {
|
|
set_surfaced(true);
|
|
}
|
|
|
|
} else if (motors.limit.throttle_lower) {
|
|
// bottom criteria met, increment counter and see if we've triggered
|
|
if (bottom_detector_count < ((float)BOTTOM_DETECTOR_TRIGGER_SEC)*MAIN_LOOP_RATE) {
|
|
bottom_detector_count++;
|
|
} else {
|
|
set_bottomed(true);
|
|
}
|
|
|
|
} else { // we're not at the limits of throttle, so reset both detectors
|
|
set_surfaced(false);
|
|
set_bottomed(false);
|
|
}
|
|
|
|
} else { // we're moving up or down, so reset both detectors
|
|
set_surfaced(false);
|
|
set_bottomed(false);
|
|
}
|
|
}
|
|
|
|
void Sub::set_surfaced(bool at_surface)
|
|
{
|
|
|
|
|
|
if (ap.at_surface == at_surface) { // do nothing if state unchanged
|
|
return;
|
|
}
|
|
|
|
ap.at_surface = at_surface;
|
|
|
|
surface_detector_count = 0;
|
|
|
|
if (ap.at_surface) {
|
|
Log_Write_Event(DATA_SURFACED);
|
|
} else {
|
|
Log_Write_Event(DATA_NOT_SURFACED);
|
|
}
|
|
}
|
|
|
|
void Sub::set_bottomed(bool at_bottom)
|
|
{
|
|
|
|
if (ap.at_bottom == at_bottom) { // do nothing if state unchanged
|
|
return;
|
|
}
|
|
|
|
ap.at_bottom = at_bottom;
|
|
|
|
bottom_detector_count = 0;
|
|
|
|
if (ap.at_bottom) {
|
|
Log_Write_Event(DATA_BOTTOMED);
|
|
} else {
|
|
Log_Write_Event(DATA_NOT_BOTTOMED);
|
|
}
|
|
}
|