/*
* Copyright (c) 2001-2003 Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* This file is part of the lwIP TCP/IP stack.
*
* Author: Adam Dunkels <adam@sics.se>
*
*/
#pragma once
#include <AP_HAL/AP_HAL_Boards.h>
#if CONFIG_HAL_BOARD == HAL_BOARD_CHIBIOS
#include "hwdef.h"
#endif
#ifdef __cplusplus
extern "C"
{
#endif
/* macOS specific */
#if defined(__APPLE__)
/* lwip/contrib/ports/unix/port/netif/sio.c */
#include <util.h>
/* lwip/src/apps/http/makefsdata/makefsdata.c */
#define GETCWD(path, len) getcwd(path, len)
#define GETCWD_SUCCEEDED(ret) (ret != NULL)
#define CHDIR(path) chdir(path)
#define CHDIR_SUCCEEDED(ret) (ret == 0)
/* lwip/src/netif/ppp/fsm.c */
/* lwip/src/netif/ppp/pppos.c */
/* lwip/src/netif/ppp/vj.c */
#pragma GCC diagnostic ignored "-Wimplicit-fallthrough"
#endif
#ifdef LWIP_OPTTEST_FILE
#include "lwipopts_test.h"
#else /* LWIP_OPTTEST_FILE */
#define LWIP_IPV4 1
#define LWIP_IPV6 0
#define MEM_LIBC_MALLOC 1
#define MEMP_MEM_MALLOC 1
#define LWIP_NETCONN_SEM_PER_THREAD 0
/**
* SO_REUSE==1: Enable SO_REUSEADDR option.
*/
#ifndef SO_REUSE
#define SO_REUSE 1
#endif
#define NO_SYS 0
#define LWIP_SOCKET (NO_SYS==0)
#define LWIP_NETCONN (NO_SYS==0)
#define LWIP_NETIF_API (NO_SYS==0)
#ifndef LWIP_IGMP
#define LWIP_IGMP LWIP_IPV4
#endif
#define LWIP_ICMP LWIP_IPV4
#define LWIP_SNMP LWIP_UDP
#ifdef LWIP_HAVE_MBEDTLS
#define LWIP_SNMP_V3 (LWIP_SNMP)
#endif
#define LWIP_DNS 0
#define LWIP_MDNS_RESPONDER 0
#define LWIP_NUM_NETIF_CLIENT_DATA (LWIP_MDNS_RESPONDER)
#ifndef LWIP_HAVE_LOOPIF
#define LWIP_HAVE_LOOPIF 1
#endif
#ifndef LWIP_NETIF_LOOPBACK
#define LWIP_NETIF_LOOPBACK 1
#endif
#define LWIP_LOOPBACK_MAX_PBUFS 10
#define TCP_LISTEN_BACKLOG 1
#define LWIP_COMPAT_SOCKETS 0
#define LWIP_SO_RCVTIMEO 1
#define LWIP_SO_RCVBUF 1
#define LWIP_TCPIP_CORE_LOCKING 1
#define LWIP_NETIF_LINK_CALLBACK 1
#define LWIP_NETIF_STATUS_CALLBACK 1
#define LWIP_NETIF_EXT_STATUS_CALLBACK 1
#define USE_PPP 1
#define LWIP_TIMEVAL_PRIVATE 0
#define LWIP_FD_SET_PRIVATE 0
#define TCP_WND 12000
#define TCP_SND_BUF 12000
#define DEFAULT_ACCEPTMBOX_SIZE 20
// #define LWIP_DEBUG
#ifdef LWIP_DEBUG
#define LWIP_DBG_MIN_LEVEL 0
#define PPP_DEBUG LWIP_DBG_ON
#define MEM_DEBUG LWIP_DBG_ON
#define MEMP_DEBUG LWIP_DBG_ON
#define PBUF_DEBUG LWIP_DBG_OFF
#define API_LIB_DEBUG LWIP_DBG_OFF
#define API_MSG_DEBUG LWIP_DBG_OFF
#define TCPIP_DEBUG LWIP_DBG_ON
#define NETIF_DEBUG LWIP_DBG_ON
#define SOCKETS_DEBUG LWIP_DBG_OFF
#define DNS_DEBUG LWIP_DBG_OFF
#define AUTOIP_DEBUG LWIP_DBG_OFF
#define DHCP_DEBUG LWIP_DBG_OFF
#define IP_DEBUG LWIP_DBG_OFF
#define IP_REASS_DEBUG LWIP_DBG_OFF
#define ICMP_DEBUG LWIP_DBG_OFF
#define IGMP_DEBUG LWIP_DBG_OFF
#define UDP_DEBUG LWIP_DBG_OFF
#define TCP_DEBUG LWIP_DBG_ON
#define TCP_INPUT_DEBUG LWIP_DBG_ON
#define TCP_OUTPUT_DEBUG LWIP_DBG_ON
#define TCP_RTO_DEBUG LWIP_DBG_OFF
#define TCP_CWND_DEBUG LWIP_DBG_OFF
#define TCP_WND_DEBUG LWIP_DBG_OFF
#define TCP_FR_DEBUG LWIP_DBG_OFF
#define TCP_QLEN_DEBUG LWIP_DBG_OFF
#define TCP_RST_DEBUG LWIP_DBG_OFF
#endif
#define LWIP_DBG_TYPES_ON (LWIP_DBG_ON|LWIP_DBG_TRACE|LWIP_DBG_STATE|LWIP_DBG_FRESH|LWIP_DBG_HALT)
/* ---------- Memory options ---------- */
/* MEM_ALIGNMENT: should be set to the alignment of the CPU for which
lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2
byte alignment -> define MEM_ALIGNMENT to 2. */
/* MSVC port: intel processors don't need 4-byte alignment,
but are faster that way! */
#define MEM_ALIGNMENT 4U
/* MEM_SIZE: the size of the heap memory. If the application will send
a lot of data that needs to be copied, this should be set high. */
#define MEM_SIZE 10240
/* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application
sends a lot of data out of ROM (or other static memory), this
should be set high. */
#define MEMP_NUM_PBUF 64
/* MEMP_NUM_RAW_PCB: the number of UDP protocol control blocks. One
per active RAW "connection". */
#define MEMP_NUM_RAW_PCB 3
/* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
per active UDP "connection". */
#define MEMP_NUM_UDP_PCB 8
/* MEMP_NUM_TCP_PCB: the number of simultaneously active TCP
connections. */
#define MEMP_NUM_TCP_PCB 5
/* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP
connections. */
#define MEMP_NUM_TCP_PCB_LISTEN 8
/* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP
segments. */
#define MEMP_NUM_TCP_SEG 16
/* MEMP_NUM_SYS_TIMEOUT: the number of simultaneously active
timeouts. */
#define MEMP_NUM_SYS_TIMEOUT 17
/* The following four are used only with the sequential API and can be
set to 0 if the application only will use the raw API. */
/* MEMP_NUM_NETBUF: the number of struct netbufs. */
#define MEMP_NUM_NETBUF 100
/* MEMP_NUM_NETCONN: the number of struct netconns. */
#define MEMP_NUM_NETCONN 64
/* MEMP_NUM_TCPIP_MSG_*: the number of struct tcpip_msg, which is used
for sequential API communication and incoming packets. Used in
src/api/tcpip.c. */
#define MEMP_NUM_TCPIP_MSG_API 16
#define MEMP_NUM_TCPIP_MSG_INPKT 16
/* ---------- Pbuf options ---------- */
/* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */
#define PBUF_POOL_SIZE 120
/* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */
#define PBUF_POOL_BUFSIZE 256
/** SYS_LIGHTWEIGHT_PROT
* define SYS_LIGHTWEIGHT_PROT in lwipopts.h if you want inter-task protection
* for certain critical regions during buffer allocation, deallocation and memory
* allocation and deallocation.
*/
#define SYS_LIGHTWEIGHT_PROT (NO_SYS==0)
/* ---------- TCP options ---------- */
#define LWIP_TCP 1
#define TCP_TTL 255
#ifndef LWIP_ALTCP
#define LWIP_ALTCP (LWIP_TCP)
#endif
#ifdef LWIP_HAVE_MBEDTLS
#define LWIP_ALTCP_TLS (LWIP_TCP)
#define LWIP_ALTCP_TLS_MBEDTLS (LWIP_TCP)
#endif
/* Controls if TCP should queue segments that arrive out of
order. Define to 0 if your device is low on memory. */
#define TCP_QUEUE_OOSEQ 1
/* TCP Maximum segment size. */
#define TCP_MSS 1024
/* TCP sender buffer space (bytes). */
#ifndef TCP_SND_BUF
#define TCP_SND_BUF 2048
#endif
/* TCP sender buffer space (pbufs). This must be at least = 2 *
TCP_SND_BUF/TCP_MSS for things to work. */
#define TCP_SND_QUEUELEN (4 * TCP_SND_BUF/TCP_MSS)
/* TCP writable space (bytes). This must be less than or equal
to TCP_SND_BUF. It is the amount of space which must be
available in the tcp snd_buf for select to return writable */
#define TCP_SNDLOWAT (TCP_SND_BUF/2)
/* TCP receive window. */
#ifndef TCP_WND
#define TCP_WND (20 * 1024)
#endif
/* Maximum number of retransmissions of data segments. */
#define TCP_MAXRTX 12
/* Maximum number of retransmissions of SYN segments. */
#define TCP_SYNMAXRTX 4
/* ---------- ARP options ---------- */
#define LWIP_ARP 1
#define ARP_TABLE_SIZE 10
#define ARP_QUEUEING 1
#ifndef ARP_PROXYARP_SUPPORT
#define ARP_PROXYARP_SUPPORT 1
#endif
/* ---------- IP options ---------- */
/* Define IP_FORWARD to 1 if you wish to have the ability to forward
IP packets across network interfaces. If you are going to run lwIP
on a device with only one network interface, define this to 0. */
#ifndef IP_FORWARD
#define IP_FORWARD 1
#endif
/*
extra header space when forwarding for adding the ethernet header
*/
#define PBUF_LINK_HLEN 16
/* IP reassembly and segmentation.These are orthogonal even
* if they both deal with IP fragments */
#define IP_REASSEMBLY 1
#define IP_REASS_MAX_PBUFS (10 * ((1500 + PBUF_POOL_BUFSIZE - 1) / PBUF_POOL_BUFSIZE))
#define MEMP_NUM_REASSDATA IP_REASS_MAX_PBUFS
#define IP_FRAG 1
#define IPV6_FRAG_COPYHEADER 1
/* ---------- ICMP options ---------- */
#define ICMP_TTL 255
/* ---------- DHCP options ---------- */
/* Define LWIP_DHCP to 1 if you want DHCP configuration of
interfaces. */
#ifndef LWIP_DHCP
#define LWIP_DHCP 1
#endif
/* 1 if you want to do an ARP check on the offered address
(recommended). */
#define DHCP_DOES_ARP_CHECK (LWIP_DHCP)
/* ---------- AUTOIP options ------- */
#define LWIP_AUTOIP (LWIP_DHCP)
#define LWIP_DHCP_AUTOIP_COOP (LWIP_DHCP && LWIP_AUTOIP)
/* ---------- UDP options ---------- */
#ifndef LWIP_UDP
#define LWIP_UDP 1
#endif
#define LWIP_UDPLITE LWIP_UDP
#define UDP_TTL 255
/* ---------- RAW options ---------- */
#define LWIP_RAW 0
/* ---------- Statistics options ---------- */
#define LWIP_STATS 0
#define LWIP_STATS_DISPLAY 0
/* ---------- NETBIOS options ---------- */
#define LWIP_NETBIOS_RESPOND_NAME_QUERY 0
/* ---------- PPP options ---------- */
#ifndef PPP_SUPPORT
#define PPP_SUPPORT 1 /* Set > 0 for PPP */
#endif
#if PPP_SUPPORT
#define NUM_PPP 1 /* Max PPP sessions. */
/* Select modules to enable. Ideally these would be set in the makefile but
* we're limited by the command line length so you need to modify the settings
* in this file.
*/
#define PPPOE_SUPPORT 0
#define PPPOS_SUPPORT PPP_SUPPORT
#define PAP_SUPPORT 0 /* Set > 0 for PAP. */
#define CHAP_SUPPORT 0 /* Set > 0 for CHAP. */
#define MSCHAP_SUPPORT 0 /* Set > 0 for MSCHAP */
#define CBCP_SUPPORT 0 /* Set > 0 for CBCP (NOT FUNCTIONAL!) */
#define CCP_SUPPORT 0 /* Set > 0 for CCP */
/*
VJ support disabled due to bugs with IP forwarding
*/
#define VJ_SUPPORT 0 /* Set > 0 for VJ header compression. */
#define MD5_SUPPORT 0 /* Set > 0 for MD5 (see also CHAP) */
#endif /* PPP_SUPPORT */
#endif /* LWIP_OPTTEST_FILE */
/* The following defines must be done even in OPTTEST mode: */
#if !defined(NO_SYS) || !NO_SYS /* default is 0 */
void sys_check_core_locking(void);
#define LWIP_ASSERT_CORE_LOCKED() sys_check_core_locking()
#endif
#ifndef LWIP_PLATFORM_ASSERT
/* Define LWIP_PLATFORM_ASSERT to something to catch missing stdio.h includes */
void ap_networking_platform_assert(const char *msg, int line, const char *file);
#define LWIP_PLATFORM_ASSERT(x) ap_networking_platform_assert(x, __LINE__, __FILE__)
#endif
/*
map LWIP debugging onto ap_networking_printf to allow for easier
redirection to a file or dedicated serial port
*/
#ifdef __cplusplus
extern "C" {
#endif
int ap_networking_printf(const char *fmt, ...);
#ifdef __cplusplus
}
#endif
#define LWIP_PLATFORM_DIAG(x) do {ap_networking_printf x; } while(0)
// #define AP_NETWORKING_LWIP_DEBUG_FILE "lwip.log"
#ifdef __cplusplus
}
#endif