#include #include #include void setup(); void loop(); void full_spectrum(); void blink(); const AP_HAL::HAL& hal = AP_HAL::get_HAL(); AP_Notify notify; static ToshibaLED_I2C toshiba_led(1); void setup(void) { // display welcome message hal.console->printf("Toshiba LED test ver 0.1\n"); // initialise LED if (toshiba_led.init()) { hal.console->printf("Failed to initialise Toshiba LED\n"); } toshiba_led.pNotify = ¬ify; // turn on initialising notification AP_Notify::flags.initialising = false; AP_Notify::flags.save_trim = true; AP_Notify::flags.gps_status = 1; AP_Notify::flags.armed = 1; AP_Notify::flags.pre_arm_check = 1; } void loop(void) { // blink test //hal.console->printf("Blink test\n"); //blink(); /* // full spectrum test hal.console->printf("Spectrum test\n"); full_spectrum(); */ // update the toshiba led toshiba_led.update(); // wait 1/50th of a second hal.scheduler->delay(20); } // full_spectrum - runs through the full spectrum of colours the led can display void full_spectrum() { // go through the full range of colours but only up to the dim light level for (uint8_t red = 0; red <= 0x05; red++) { for (uint8_t green = 0; green <= 0x05; green++) { for (uint8_t blue = 0; blue <= 0x05; blue++) { toshiba_led.set_rgb(red, green, blue); hal.scheduler->delay(5); } } } } #define LED_DIM 0x11 // blink - blink the led at 10hz for 10 seconds void blink() { // set colour to red toshiba_led.set_rgb(LED_DIM, 0, 0); // full spectrum test for (uint8_t c=0; c<=2; c++ ) { if (c == 0) { toshiba_led.set_rgb(LED_DIM, 0, 0); // red }else if (c==1) { toshiba_led.set_rgb(0, LED_DIM, 0); // green }else{ toshiba_led.set_rgb(0, 0, LED_DIM); // blue } } } AP_HAL_MAIN();