/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*- #include "Copter.h" /* This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ /* constructor for main Copter class */ const AP_HAL::HAL& hal = AP_HAL::get_HAL(); Copter::Copter(void) : flight_modes(&g.flight_mode1), sonar_enabled(true), mission(ahrs, FUNCTOR_BIND_MEMBER(&Copter::start_command, bool, const AP_Mission::Mission_Command &), FUNCTOR_BIND_MEMBER(&Copter::verify_command_callback, bool, const AP_Mission::Mission_Command &), FUNCTOR_BIND_MEMBER(&Copter::exit_mission, void)), control_mode(STABILIZE), #if FRAME_CONFIG == HELI_FRAME // helicopter constructor requires more arguments motors(g.rc_7, g.heli_servo_rsc, g.heli_servo_1, g.heli_servo_2, g.heli_servo_3, g.heli_servo_4, MAIN_LOOP_RATE), #elif FRAME_CONFIG == TRI_FRAME // tri constructor requires additional rc_7 argument to allow tail servo reversing motors(MAIN_LOOP_RATE), #elif FRAME_CONFIG == SINGLE_FRAME // single constructor requires extra servos for flaps motors(g.single_servo_1, g.single_servo_2, g.single_servo_3, g.single_servo_4, MAIN_LOOP_RATE), #elif FRAME_CONFIG == COAX_FRAME // single constructor requires extra servos for flaps motors(g.single_servo_1, g.single_servo_2, MAIN_LOOP_RATE), #else motors(MAIN_LOOP_RATE), #endif scaleLongDown(1), wp_bearing(0), home_bearing(0), home_distance(0), wp_distance(0), auto_mode(Auto_TakeOff), guided_mode(Guided_TakeOff), rtl_state(RTL_InitialClimb), rtl_state_complete(false), circle_pilot_yaw_override(false), simple_cos_yaw(1.0f), simple_sin_yaw(0.0f), super_simple_last_bearing(0), super_simple_cos_yaw(1.0), super_simple_sin_yaw(0.0f), initial_armed_bearing(0), throttle_average(0.0f), desired_climb_rate(0), loiter_time_max(0), loiter_time(0), #if FRSKY_TELEM_ENABLED == ENABLED frsky_telemetry(ahrs, battery), #endif climb_rate(0), sonar_alt(0), sonar_alt_health(0), target_sonar_alt(0.0f), baro_alt(0), baro_climbrate(0.0f), land_accel_ef_filter(LAND_DETECTOR_ACCEL_LPF_CUTOFF), rc_throttle_control_in_filter(1.0f), auto_yaw_mode(AUTO_YAW_LOOK_AT_NEXT_WP), yaw_look_at_WP_bearing(0.0f), yaw_look_at_heading(0), yaw_look_at_heading_slew(0), yaw_look_ahead_bearing(0.0f), condition_value(0), condition_start(0), G_Dt(0.0025f), inertial_nav(ahrs), attitude_control(ahrs, aparm, motors, g.p_stabilize_roll, g.p_stabilize_pitch, g.p_stabilize_yaw, g.pid_rate_roll, g.pid_rate_pitch, g.pid_rate_yaw), pos_control(ahrs, inertial_nav, motors, attitude_control, g.p_alt_hold, g.p_vel_z, g.pid_accel_z, g.p_pos_xy, g.pi_vel_xy), wp_nav(inertial_nav, ahrs, pos_control, attitude_control), circle_nav(inertial_nav, ahrs, pos_control), pmTest1(0), fast_loopTimer(0), mainLoop_count(0), rtl_loiter_start_time(0), auto_trim_counter(0), ServoRelayEvents(relay), #if CAMERA == ENABLED camera(&relay), #endif #if MOUNT == ENABLED camera_mount(ahrs, current_loc), #endif #if AC_FENCE == ENABLED fence(inertial_nav), #endif #if AC_RALLY == ENABLED rally(ahrs), #endif #if SPRAYER == ENABLED sprayer(&inertial_nav), #endif #if PARACHUTE == ENABLED parachute(relay), #endif #if AP_TERRAIN_AVAILABLE && AC_TERRAIN terrain(ahrs, mission, rally), #endif #if PRECISION_LANDING == ENABLED precland(ahrs, inertial_nav, MAIN_LOOP_SECONDS), #endif #if FRAME_CONFIG == HELI_FRAME // ToDo: Input Manager is only used by Heli for 3.3, but will be used by all frames for 3.4 input_manager(MAIN_LOOP_RATE), #endif in_mavlink_delay(false), gcs_out_of_time(false), param_loader(var_info) { memset(¤t_loc, 0, sizeof(current_loc)); // init sensor error logging flags sensor_health.baro = true; sensor_health.compass = true; } Copter copter;