Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
46,212 Commits 70 Branches 507 Tags 665 MiB
Commit Graph

46212 Commits

Author SHA1 Message Date
Peter Hall fc95664580 AP_Scripting: add GCS send_named_float binding 2021-02-17 18:49:20 +11:00
Andy Piper 3371c272fb AP_Notify: make LED_NTF_LEN changes require a reboot 
don't dynamically update LED length
 2021-02-17 18:36:36 +11:00
Andy Piper 3a9107245c AP_HAL_ChibiOS: allocate DMA and LED buffers correctly when the length changes 
calculate DMAR pulse times correctly
ensure 50us pulse separation for LED
make sure the LEDs are signalled for output
only allow LED length to be set once
 2021-02-17 18:36:36 +11:00
Andy Piper a98f85502a AP_RCTelemetry: add support for SmartAudio protocol. 
treat VTX frequency as a first class citizen, match band/channel to frequency
update CRSF to use new VTX configuration
use a 6-position switch to control VTX power
add support for VTX GCS announcement
announce VTX updates on CRSF
support pitmode-until-arm and pitmode-on-disarm

Co-authored-by: luis.martinez.exts <luis.martinez@juntadeandalucia.es>
 2021-02-17 18:23:33 +11:00
Andy Piper ea3af39773 RC_Channel: add support for 6-position switch and use it for VTX power 2021-02-17 18:23:33 +11:00
Andy Piper 6f91e053d5 AP_VideoTX: new library to support the SmartAudio protocol 
set the VTX parameters to what was actually configured by the VTX
use change band/change frequency when appropriate
set power levels appropriately for protocol version.

Co-authored-by: luis.martinez.exts <luis.martinez@juntadeandalucia.es>
 2021-02-17 18:23:33 +11:00
Andy Piper 7aa1e2d63b waf: add AP_VideoTX module 2021-02-17 18:23:33 +11:00
Andy Piper 2d0fe8b883 AP_SerialManager: add support for the SmartAudio protocol 
Co-authored-by: luis.martinez.exts <luis.martinez@juntadeandalucia.es>
 2021-02-17 18:23:33 +11:00
Andy Piper b79ff9475d AP_Vehicle: add support for the SmartAudio protocol 
Co-authored-by: luis.martinez.exts <luis.martinez@juntadeandalucia.es>
 2021-02-17 18:23:33 +11:00
Peter Barker 33fee211a4 autotest: extend pexpect timeouts when running under Valgrind 2021-02-17 18:16:04 +11:00
Peter Barker a292fe1b8b autotest: use wait_statustext rather than mavproxy.expect 
This is important when running under Valgrind as the text can be
significantly delayed.  wait_statustext times out in simulation time,
whereas mavproxy.expect has a flat 60s timeout
 2021-02-17 18:16:04 +11:00
Peter Barker c20c4a6308 AP_HAL_SITL: set bus in read-size of rdwr transaction 2021-02-17 14:23:07 +11:00
Peter Barker c00a82868e autotest: make DLVR sole airspeed sensor in test 
The test wasn't actually *using* the DLVR...
 2021-02-17 14:23:07 +11:00
Peter Barker dbdda65956 autotest: add basic test for GPS blending 2021-02-17 11:30:01 +11:00
Peter Barker 1c4e1aab05 AP_Logger: move gps logging structures into AP_GPS 2021-02-17 11:30:01 +11:00
Peter Barker c2cba52ad8 AP_GPS: move gps logging structures into AP_GPS 2021-02-17 11:30:01 +11:00
SSGrady 82a84c8f35 Tools: added name to GIT_Success.txt 2021-02-16 12:42:10 -08:00
Peter Barker 94c4b2d769 mavlink: update to ardupilot master commit 2021-02-16 22:36:43 +11:00
Peter Barker 1ca0998f32 Tools: take MAV_CMD_DO_SPRAYER as a mavlink command 2021-02-16 22:36:43 +11:00
Peter Barker eefcc92f24 GCS_MAVLink: take MAV_CMD_DO_SPRAYER as a mavlink command 2021-02-16 22:36:43 +11:00
Peter Barker b14dcf4bae Tools: add mission command to turn sprayer on and off 2021-02-16 22:36:43 +11:00
Peter Barker c3b005e1d9 AP_Mission: add mission command to turn sprayer on and off 2021-02-16 22:36:43 +11:00
Rishabh 98287a1b2f AC_Avoid: Use previous avoidance vel for limiting accel 2021-02-16 20:08:00 +09:00
Rishabh cbf57af1f3 AC_Avoid: Limit acceleration while simple avoidance is active 2021-02-16 20:08:00 +09:00
Rishabh 865f3cda79 AC_Avoid: Add param to switch off proximity avoidance based on alt 2021-02-16 20:08:00 +09:00
Rishabh fdd39ca3a8 Copter: Check for height before turning on proximity simple avoidance 2021-02-16 20:08:00 +09:00
Peter Barker be8f747b7a autotest: adjust timeout for Valgrind; disable for gdb 2021-02-16 13:18:41 +11:00
Peter Hall c1a831bbf4 GCS_MAVLink: sensor flags, only mark AHRS as enabled once initialised 2021-02-16 12:54:28 +11:00
Dr.-Ing. Amilcar do Carmo Lucas 2302f08f75 Copter: run the "point yaw to ROI" controller at full rate (400Hz) instead of 1/4 of full rate (100Hz) 
- This should improve pointing at ROI and replaces #11172
 - Remove unused member variable as per review suggestion
 - declare Mode::AutoYaw::roi_yaw() as const
 2021-02-16 09:30:21 +09:00
Andrew Tridgell a42bfd5df5 AP_Baro: added MS5611 baro compensation for -15 to -40C 2021-02-16 11:20:57 +11:00
Michael du Breuil 4c4e613f6a AP_GPS: Don't send SBF config unless there is free space in the port 2021-02-15 16:31:45 -07:00
Michael du Breuil c0da87c066 AP_HAL_ChibiOS: Update HitecMosaic to reflect changes to GPS config 2021-02-15 16:31:45 -07:00
Michael du Breuil 4d42996068 AP_GPS: Force the buadrate on SBF units 2021-02-15 16:31:45 -07:00
Peter Barker 01eb64ce73 AP_RPM: don't present RPM2_PIN parameter if RPM_MAX_INSTANCES <=1 2021-02-16 08:26:18 +09:00
Randy Mackay 97c1445bce Copter: ensure send_position_target_global_int alt always absolute 2021-02-15 17:39:07 +11:00
Peter Barker ea0efd3a1a Copter: correct documentation of use of DO_CHANGE_SPEED parameter 2021-02-15 15:44:17 +11:00
Andrew Tridgell 6d1511f3eb GCS_MAVLink: added method to force save calibration 
useful after reloading parameters
 2021-02-15 07:24:40 +11:00
Andrew Tridgell f8e0227c8c AP_Compass: added force_save_calibration() 2021-02-15 07:24:40 +11:00
Andrew Tridgell 25dd08a1fd AP_InertialSensor: added force_save_calibration() 2021-02-15 07:24:40 +11:00
Andrew Tridgell 9de1519928 HAL_ChibiOS: prevent hw flow control from hogging a DMA channel 
When hw flow control is enabled check the CTS pin before we grab the
DMA channel to prevent a long timeout trying to send to a blocked port
from holding a DMA channel against another device

this fixes issue #16587
 2021-02-15 07:23:56 +11:00
Andrew Tridgell ee8e9e3289 waf: fixed handling of vehicle dependency check for abs paths 
this fixes the use of vehicle dependent cpp files on the build server
 2021-02-15 07:23:33 +11:00
Peter Barker 3c3db50843 Vagrant: augment bash when working in a git repository 
This .bashrc_git originally came from tridge.
 2021-02-14 09:57:26 +11:00
Peter Barker 1b74058842 Plane: recalculate glide slope after achieving rtl.done_climb 2021-02-13 19:34:52 +11:00
Peter Barker ca49f62b6d autotest: add test for Plane's RTL_CLIMB_MIN parameter 2021-02-13 19:34:52 +11:00
Peter Barker e4d5a92721 autotest: add wait_distance_to_nav_target method 2021-02-13 19:34:52 +11:00
Peter Barker d60fa86026 autotest: use set_map_from_rc more 2021-02-13 19:34:52 +11:00
Andrew Tridgell 106162b0c5 AP_MSP: removed date/time from MSP 
we don't want to use real dates here as that would mean we don't get
consistent builds. Being able to reproduce the exact build at a later
date is a valuable property of the code

The git hash should be enough
 2021-02-13 19:24:48 +11:00
Andrew Tridgell 0cc4409845 HAL_ChibiOS: fixed handling of invalid channel for LED write 
this prevents a null ptr dereference when an invalid channel (such as
one on IOMCU) is used for LEDs
 2021-02-13 15:11:10 +11:00
Andrew Tridgell 098a17fe2e HAL_ChibiOS: fixed CubeOrange ADSB param name 2021-02-13 13:06:20 +11:00
Rishabh f107ce3951 AP_Proximity: Use 3 sectors for simple avoidance boundary 2021-02-12 16:48:16 +09:00